Portable Industry X-ray Flaw Detector

ASME E1025 ASTM E747 DIN 54 Wire Penetrameter Penetrometer Image Quality Indicator IQI Image quality meter (image quality indicator, penetrometer) is a device for measuring the radiographic sensitivity of radiographic photographs. According to the image of the image quality meter displayed on the negative, the quality of the negative image can be judged, and the technology of transillumination, film darkroom processing, defect detection ability can be evaluated. EN 462-1 Wire

HUATEC HDL-450 NDT Constant Temperature Film Washer I. working principle: According to the principle of automatic film washer, the developer and fixer are stirred (circulated) to the set temperature. Will be installed X-ray film wash piece into the washing machine is developed grooves, the washing machine automatic timing, to set a time (time setting range: 1-6 minutes) after the buzzer warning sound, working people can wash piece frame from developing slot (stop warning

Filed X Ray Film Developer Machine Film Developer Film Processor HDL-340 Compact design with small footprint for mobile and filed operations; Integrated design of development, fixing and drying axle frame system; The use of non-piping design. Technical parameter 1. Size of film: Min.5x10cm up to 35cm width 2. Running time: 6-15min. (10-Gear Adjustable) 3. Inlet speed: 90 mm/min (6 minutes when running time) 4. Development time : 90-210 sec 5. Tank volume :6 Liters (per dosing

Handheld Ultraviolet Lamp , black LED UV Light DG - 9W Internal batteries UV LIGHT Magnetic Strength Meter Lightweight Portable Handheld Ultraviolet Lamp Magnetic Flaw Detector Testing LED Charging UV Light DG-9W Characteristic Irradiance>7000uw/cm2 Internal batteries Pre-alert and protection of low power Light source life 30000H Feature: 9av power saving of power consumption 30000H life expectancy of light source Imported light source UVLED 0 UV-B contained Battery endurance

300KV Ceramic tube penetrant 40mm Directional Radiographic inspection machine Trouble Shooting If the unit get out of control in the states of exposure and aging, such as over-voltage, under-voltage, over-current and under-current,etc. voice will prompt,the system will turn off high voltage automatically and return to ready state,in the meantime corresponding protective indicator lamp will be on and indicate the type of troubles.Press"OFF"key for clearing the trouble after

250KV Ceramic tube penetrant 40mm Directional Radiographic inspection machine Units of Keyboard 0-9 as digital keys for presetting time and kv value. Voltage status key(U):Press the key,status bit shows"U" ,the operator can input 3-digital Voltage value. Time status key(H):Press the key,status bit shows "H" , the operator can input 2-digital time value. Delay status(A):Press the key,status bit shows "A" , the operator can input 2-digital delay time. "AG" k

Digital Radiography (DR) System Portable X-ray Machine for Welding Digital Flat Panel HDR-2530 Digital Radiography (DR) system Features:  Meet the latest NB/T 47013.11-2015 standard  Digital transformation of X-ray real-time imaging detection system  On-site portable digital imaging inspection  16bit high dynamic range  120μm pixels, high resolution 4.0lp/mm  CsI cesium iodide efficient X-ray image conversion  25cmX30cm imaging field of view 1-Industrial X-ray digital

Image Quality Indicator Wire Penetrometer, Wire Penetrameter, Penetrameter, Penetrometer All kinds of wire penetrometer, with material of FE SS AL CU TI NI etc with standards ISO19232.1,JIS Z2306,EN462-2,EN462-1,ASTM E747,ASME E1025 and KS standards. Wire length has option of 25mm,50mm,70mm, 80mm,100mm and 120mm EN 462-1 Wire Type were introduced as a EUROPEAN STANDARD to supersede the German Standards (DIN 54.109) and the British Standards Institute (BS3971:1980 type 1)

Wire Penetrometer, Wire Penetrameter, Penetrameter, Penetrometer Image Quality Indicator IQI ASTM E747 Wire Type Penetrameters consists of a series of six parallel wires of different thicknesses, encapsulated between two thin sheets of transparent, flexible PVC. Lead characters identify the thickness of the thickest wire, and the material group(1-FE, 01-Ti, 02-Al, 03-Mg, 3-Ni, 4-Cu). The letters ASTM are also included. DIN 54 109 Wire Type Image Quality Indicators are similar

Geiger Muller Tube , Halogen Geiger Counter Tube portable x-ray machine for welding​ J614 γ Halogen Geiger Counter Tube 1).Purpose: used for measuring the intensity of rays 2).Maximum overall dimension: φ75 x x55 (mm) 3).Main parameters: 1. The starting counting voltage is 320 ~ 350 volts 2. Flat characteristics at room temperature: the flat area ranges from 380 to 460 volts Internal plateau slope < 15%/80 volts 3. Low temperature performance: plateau inclination < 25%/80V at

Geiger Muller Tube , Counter tube weld x ray inspection machine Specification for type J705 counter tube The tube is a thin - walled halogen counter for detecting Y ray intensity. It can also be used to detect high-energy β rays 1). overall dimension :(mm) 2). Main parameters 1. Starting counting voltage: less than 420V 2. Range of flat: 450-550v 3. Slope of flat country: less than 15% 100V 4. Operating temperature :-40℃ ~ +60℃ 5. Sensitivity :5.5 CPS(mR.h-1) 6. Maximum anode

350KV Ceramic tube penetrant 40mm Directional Radiographic inspection machine System Installation 1. Check and count all goods to be received per the packing list. And then check the quality of the parts for damage,lost and mistake. 2. Keep the controller in a flat,dry and dustless place, switch off the power and connect the power cable. (Note: The power supply of the unit is single phase 220V±10% 50-60HZ) 3. If necessary,one end of earth wire can be connected to the earth

320KV Ceramic tube penetrant 40mm Directional Radiographic inspection machine Main technical parameters ITEM XXG3205 Max Penetration thickness Steel (A3) 55mm Focal Distance 600mm Exposure Time 5min Film Type Agfa D7 Double lead foil Intensifying screen 0.03 Darkroom Disposal 20±2℃ Development 5minutes Blackness 1.5 Input Voltage (V) 220V±10% 50―60Hz Capacity (KVA) 3.2 Output Tube voltage (KVP) 170-320Kv Tube current (mA) 5 Stability ±1% X-RAY Tube Focus mm2 2.5×2.5 Radiation

200KV Ceramic tube penetrant 30mm Directional Radiation Portable X-Ray Flaw Detector Usage: The HUATEC Flaw detector products have been widely used for nondestructive testing in spaceflight industry, welding engineering industry, shipbuilding industry, boiler pipe industry, petrochemical engineering industry, aircraft manufacturing, maintenance industry, automotive industry, defense industries, etc. Features: ◆ Adopting micro-computer control and modular structure, with

160KV Ceramic tube penetrant 18mm Directional Radiation Portable X-Ray Flaw Detector The HUATEC Flaw detector products have been widely used for nondestructive testing in spaceflight industry, welding engineering industry, shipbuilding industry, boiler pipe industry, petrochemical engineering industry, aircraft manufacturing, maintenance industry, automotive industry, defense industries, etc.Features:◆ Adopting micro-computer control and modular structure, with strong anti

100KV Glass tube Penetrant 8mm Directional Radiation Portable X-Ray Flaw DetectorFunctional characteristics:HUATEC XXQ series x-ray flaw detector produced by our company, HUATEC Group Corporation, which adopt variable-frequency and constant-frequency pulse techniques. The HUATEC XXQ series controllers has novel structure, perfective performance and convenient to carry etc. characters. It based on microcomputer control system and modular structure, which makes integral machine

350KV Glass tube Penetrant 60mm Directional Radiation Portable X-Ray Flaw Detector XXQ3505 Features: ◆ Adopting micro-computer control and modular structure, with strong anti-interference ability and high automaticity and reliable performance. ◆ Parameter setting, working process and trouble indication will be indicated on the LED screen. ◆ Independent aging key is designed for aging the machine conveniently. ◆ Radiating time to cooling time is 1:1. ◆ The controller can

320KV Glass tube Penetrant 55mm Directional Radiation Portable X-Ray Flaw Detect Functional characteristics:The HUATEC XXQ series x-ray flaw detector produced by our company, HUATEC Group Corporation, which adopt variable-frequency and constant-frequency pulse techniques. The XXQ series controllers has novel structure, perfective performance and convenient to carry etc. characters. It based on microcomputer control system and modular structure, which makes integral machine

300KV Glass tube penetrant 50mm Directional Radiation Portable X-Ray Flaw Detector for metal Features:◆ Adopting micro-computer control and modular structure, with strong anti-interference ability and high automaticity and reliable performance.◆ Parameter setting, working process and trouble indication will be indicated on the LED screen.◆ Independent aging key is designed for aging the machine conveniently.◆ Radiating time to cooling time is 1:1.◆ The controller can

250KV Glass tube 40mm Directional Radiation Portable X-Ray Flaw Detector XXQ-2505 Features:◆ Adopting micro-computer control and modular structure, with strong anti-interference ability and high automaticity and reliable performance.◆ Parameter setting, working process and trouble indication will be indicated on the LED screen.◆ Independent aging key is designed for aging the machine conveniently.◆ Radiating time to cooling time is 1:1.◆ The controller can recognize the type