Lamp Cap Gauge

GX53 Lamp cap gauge | "NOT GO" Gauge For Checking Keyways in Caps GX53 | 7006-142F-1 PURPOSE: To check the maximum keyway width (dimension X) of caps GX53-.. TESTING: It shall not be possible to insert the cap into the gauge. Related gauges for GX53 7006-142-1 "GO" AND "NOT GO" GAUGE FOR CAPS GX53 PURPOSE: To check caps GX53-.. in the following respects: - the diameter of the individual pins (dimension A); - the combined displacement and diameter of the pins (dimens

GX53 Lamp cap gauge | "NOT GO" Gauge For Caps GX53 | 7006-142D-1 PURPOSE: To check the minimum cap diameter (dimension L1) of caps GX53-.. TESTING: It shall not be possible to insert the cap into the gauge. Related gauges for GX53 7006-142-1 "GO" AND "NOT GO" GAUGE FOR CAPS GX53 PURPOSE: To check caps GX53-.. in the following respects: - the diameter of the individual pins (dimension A); - the combined displacement and diameter of the pins (dimensions A and D); - th

GX53 Lamp cap gauge | "GO" and "NOT GO" Gauge For Caps GX53 | 7006-142-1 PURPOSE: To check caps GX53-.. in the following respects: - the diameter of the individual pins (dimension A); - the combined displacement and diameter of the pins (dimensions A and D); - the length of the pins (dimension F1); - the recess length and diameter of the pins (dimensions F2 and E); - the maximum cap outline with respect to dimensions M, L1 and K. TESTING: It shall be possible to insert the

GX53 Lamp cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1 PURPOSE: PURPOSE: To check caps GX53-1 in the following respects: - correct keyway position in relation to cap pins; - the minimum height and width of the keyway (dimensions W and X2); - to prevent the possibility of insertion of only one pin. TESTING: It shall be possible to insert the cap into the gauge until the reference plane of the cap is in contact with surface Y of the gauge. It

G13 lamp cap gauge | "GO" gauge for bi-pin cap on finished lamps G13-7006-45-4 Purpose: Purpose: to check dimensions E max.,F min.,F max.,and the combined pin diameter and displacement of pins (including bosses) of bi-pin caps G13 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface O and, when fully inserted, the surfaces of cap and gauge shall contact. In this position the end of the pins shall be co-planar with or project

G13 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4 Purpose: to check dimensions E min., E max., F min., G max. and the combined pin diameter and displacement of pins(including bosses) of unmounted bi-pin caps G13. Testing: the pins of the cap shall enter the gauge at surface O and, when fully inserted, the surfaces of cap and gauge shall contact. In this position the ends of the pins shall be co-planar with or

E26 Lamp cap gauge | gauge for testing contact-making of lamps fitted with caps E26 | 7006-29-3 PURPOSE: To check lamp dimensions for contact-making in E26, E26/50x39, E26/51x39 or E26d Lampholders. TESTING: The shape of the lamp with regard to the fit in the lampholder is assumed to be correct, if the lamp can be pushed into the gauge until plane W reaches plane V or projects beyond it. For E26/24 capped lamps, when surfaces V and W are coincident, the top of the cap

E26 Lamp cap gauge | not go gauge for caps E26 | 7006-29L-4 PURPOSE: To check the minimum outside (major) diameter of the screw thread, dimension d, of E26, E26/50x39, E26/51x39 or E26d caps on finished lamps. TESTING: When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the central contact shall not project beyond surface X. Only the weight of the gauge itself shall be used in the test. Related gauges: "NOT GO" GAUGE FOR E26, E26/50x39,

E27 Lampholder Gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2 Precision testing gauge designed for comprehensive quality control of E27 lampholders, ensuring mechanical compatibility and dimensional accuracy. Purpose and Applications Verify minimum dimensions of lampholder screw thread according to sheets 7004-21 and 7004-27 Check dimension X as specified in sheet 7005-20 Test mechanical compatibility with lamps having adverse dimensions Testing Procedure Screw the

IEC60061-3: 7006-22C-1 E27 Gauge I for Checking Side Contact Resiliency in LampholdersFor details of gauge II, see sheet 7006-22D.The conical part and the screw-thread of the gauge shall comply with the following requirements:- Surface finish: 0,4 um (see ISO 468 - 1982)- Hardness (after tempering): rockwell cone 55 min.The pitch of the scerew thread of the central rod is 1 mm.The scale shall consist of 50 parts;each part repressnting an axial movement for the central rod of

DIN-VDE0620-1 Plug And Socket Gauge For Measuring German Standard Plug And Socket Product information: The gauges conforms to the standard of DIN-VDE0620-1.It is measuring German standard plug and socket. Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug with earthing contact

ISO 8124-1 2014 Stainless Steel Protrusion Test Gauge Technical Parameter Material Stainless steel torerances+/-0.1mm 1.Inner diameter 13mm Outer diameter 25mm Thickness 6mm 2.Inner diameter 26mm Outer diamter 38mm Thickness 12.5mm 3.Inner diameter 38mm Outer diameter 50mm Thickness 19mm 4.Inner diameter 77mm Outer diameter 89mm Thickness 38mm IS 9873-4 ISO8124-4 Clause No. 6.7.1.2

G10q , GX10q, GY10q,GZ10q Lamp cap gauge , "GO" GAUGE FOR CAPS C G10q, GX10q, GY10q , GZ10q GO" GAUGE FOR CAPS CALIBRE «ENTRE» POUR CULOTS G10q, GX10q, GY10q & GZ10q Mass: 0.45kg (1) This section is used only to provide additional mass so as to bring the total mass of the gauge to the required value. PURPOSE: To check dimensions Fmin., Fmax. and the combined pin diameter and displacement of pins (including bosses) of caps G10q, GX10q, GY10q and GZ10q respectively. TESTING:

E40 Lamp cap gauge | E40-7006-27-7 | E40-7006-28D-1 | E40-7006-52-1 | E40-7006-53-1 IEC60061-3 E40 Lamp gauges Model Gauge Description 7006-27-7 Go gauge for caps on finished lamps E40 Purpose: to check the maximum dimensions of the screw thread and dimension T1 minimum of E40 caps on finished lamps. Testing: when the cap on a finished lamp has been screwed into the gauge as far as it will go, the centre contact shall be co-planar with, or project beyond, surface X. 7006-28D

E40 Lamp cap gauge | Gauge for testing protection against bulb-neck damage and for testing contact-making in lampholders E40-7006-23-3 Purpose: to check the maximum minor diameter of the screw thread, dimesion D1, of lampholder E40. Testing: the screw thread of the lampholder shall be assumed to be correct if the gauge does not enter by its own weight so far that the thread protrudes beyond surgace T. IEC60061-3 E40 Lampholder gauges Model Gauge Description 7006-25-7 Go

GU10 Lamp cap gauge | Gauge for checking the maximum insertion and withdrawal torques in lampholders GU10 PURPOSE: To check the maximum insertion torque and the maximum withdrawal torque of lampholders GU10. To check for proper acceptance of "maximum" GU10 lamp bases. Testing: it shall be possible to insert each end of the gauge in turn into the lampholder with a torque not exceeding the maximum insertion torque specified on the lampholder sheet. It shall be possible to

G5 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G5-7006-46-3 Purpose: to check dimensions E min., E max., F min., G max. and the combined pin diameter and displacement of pins(including bosses) of unmounted bi-pin caps G5. Testing: the pins of the cap shall enter the gauge at surface O and, when fully inserted, the surfaces of cap and gauge shall contact. In this position the ends of the pins shall be co-planar with or

G5 Lamp Cap Gauge | "GO" Gauge For Bi-Pin Cap On Finished Lamps G13-7006-46A-3 Purpose: Purpose: to check dimensions E max.,F min.,F max.,and the combined pin diameter and displacement of pins (including bosses) of bi-pin caps G5 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface O and, when fully inserted, the surfaces of cap and gauge shall contact. In this position the end of the pins shall be co-planar with or project

E26d Lamp Cap Gauge | Gauge With Reference Diameter Of 13.2mm For Caps E26d | 7006-29C-2 PURPOSE: To check dimensions Cmax. and C1max. of caps E26d. TESTING: When the unmounted cap has been pushed into the gauge as far as it will go, surface W of the plunger shall not project beyond surface X. For caps on finished lamps, surface W shall not project beyond surface V. In this instance, the cap shall be so positioned that the solder on the intermediate contact is located in the

E26d Lamp Cap Gauge | Gauge With Reference Diameter Of 23mm For Caps E26d | 7006-29B-2 PURPOSE To check dimensions Smin., Smax., S1min. and S1max. of caps E26d. TESTING When the cap (or lamp) has been pushed into the gauge as far as it will go, surface W of the plunger shall project beyond surface Y, but for unmounted caps, shall not project beyond surface X. For caps on finished lamps, surface W shall not project beyond surface V. Related gauges: "NOT GO" GAUGE FOR E26, E26