Light Testing Equipment

Lamps and Lanterns Adjusting Devices Product information: The device is used to detect adjustment device, and confirm to the IEC60598-1 clause 4.14.3. The adjustment device, equipped with the appropriate cable or cord shall be operated in accordance with following table. A cycle of operation is a movement from one extreme of the range to the other and back to the starting position. The rate of movement shall not cause the device to heat appreciably and shall not exceed 600

Temperature Rise Test Machine Installation Box Standard Socket test box according to the requirements of the gb2099.1-2008, IEC60884 provide complete sets of equipment (including installation board was loose and coating materials requirements). Technical parameters 1, pine groove size should be able to make at least 25mm wood surrounded by plaster; 2, mud surrounds the installation box, in the installation box of the edge and bottom size; 3, the thickness of the mortar are

Constant Temperature Water Bath Product information: This device meets the test equipment requirements of GB5013 and UL1581 etc. And mating usage of other devices, it can be used to inspect the withstand voltage and insulation performance of electric wire and cable. It adopts PID temperature control system. Heating power: 4.5 KW Volume of the water tank: 550 X350X500 (can be customized) Temperature range: room temperature ~95±1℃

Test Device Suitable For Winding A Flexible Pipe Product information: Conform to standard: IEC60598-2-20:6.14 Figure 3, it is used to test the mechanical strength of the light string. Weight: 60N*1 Diameter of cylinder (mm): 250mm Material: Wood

Light Testing Equipment Lamp Tilt Test Bench 0-30 Degree GB7000 Product information: This device complies with GB7000 and other standards, the device consists of a work surface and angle adjustment device, is suitable for all types of portable lamps and similar electrical appliances products for mechanical stability test, the test sample is placed on countertops, to assess its mechanical stability through different tilt angles. Technical specification and parameter configurat

Wire Damage Degree Tester Usage to test wire damage degree of fixed connection component equipped with screw clamping type and screwless terminal and check if it can bear the mechanical stress during normal operation Technical Parameters Control system:German Siemens colorful touch screen and PLC control Dynamical system:original Japan Panasonic servo motor Data record:can input experimental datas into computer through USB or RS232 port;connect the printer to print data

Luminaire Adjustment Test Device Meet standards of GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000 Function: Applied to testing adjustment device with soft cable and wire built in to check if its shares of conductor breakdown is in excess of 50% after continuous bending and if there is serious damage in insulation layer. Product feature:adopts PCL control and LCD panel operation with adjustable test angle and speed;power focal positioning;bend the axis and luminaire swivel

IEC61347-1-Figure 2 -160A Test Circuit with 10mΩ±5% Calibration Resistance Light Testing Equipment Key Specifications Attribute Value Power 220V 50/60Hz Standard IEC 61347-1 Technical Description IEC61347-1-Figure 2 -160A Test circuit compliant with international standards for electrical testing equipment. Technical Parameters Input voltage: 220V-240V Working frequency: 50/60Hz Power: 40kW Current: 150A-180A adjustable Short circuit time: 0.01s-1h (adjustable) Calibration

UL 3300-Figure 4 Sharp Edge Test Product Introduction Sharp Edge Tester used to determine that metal or glass edges on toys and other articles intended for use by children under 8 years of age, and such edges exposed in normal use or as a result of reasonably forseeable damage or abuse of such toys and articles, present a potential risk of injury by laceration or avulsion. Standards: UL 3300 EN 71-1 ASTM F963 16CFR 1500 ISO 8124-1 GB 6675-2 Features The especially powerful

KP-1802 Self Ballasted Lamp Load Cabinet for Load Switching Capacity Test Product Information Sample and restrictions: Switches for controlling self-ballasted lamps. Test Purpose Used to test the load switching capacity of switches for controlling self-ballasted lamps. Test Principle Switches used to control self-ballasted lamps should withstand the electrical and thermal stresses that occur when controlling LED circuits without excessive damage or other harmful effects. The