Shell And Tube Heat Exchanger

Dual Circuit Air Cooled Heat Pump Module Tube Evaporator Central Air Conditioning 1, the traditional central air conditioning with air source heat pump (air-cooled unit) + auxiliary electric heating and water-cooled chiller + boiler two forms. Air-source heat pump (air-cooled unit) and water- cooled chillers are cooling the room to the outdoor air emissions, by the outdoor temperature factors too much, the cooling capacity with the outdoor air temperature decreases,

Factory Price water pump module condenser marine tubular heat exchanger Brine Heat Exchanger Evaporator Small-sized condenser shell can choose thick seamless steel pipe. Large-scale condenser shell will be made of steel plate rolling. The tubesheet is welded to both ends of the housing to form a complete housing. Tubes on the processing of a number of holes, heat transfer tube through the tube hole, both ends and tube plate with expansion or welding connected, and to have

Titanium Shell And Tube Heat Exchanger Sea Water Condenser 1, Introduction: (1) The product is applicable to water chiller units, water source heat pump units etc. (2) Suitable refrigerants are R22, R134a, R407C, R410A etc. (3) Apply load cold agent for tap water, underground water, river water and sea water or brine, water and glycol solution, sulfate solution, etc. (4) For heat exchange tube, copper pipe, copper nickel alloy tube, aluminum brass tube, stainless steel tube,

Industrial Water Cooled Condenser Seawater Heat Exchanger air cooled condenser copper tube Small-sized condenser shell can choose thick seamless steel pipe. Large-scale condenser shell will be made of steel plate rolling. The tubesheet is welded to both ends of the housing to form a complete housing. Tubes on the processing of a number of holes, heat transfer tube through the tube hole, both ends and tube plate with expansion or welding connected, and to have good air

Heat exchanger shell and tube cold room evaporator copper tube evaporator Water-cooled central air-conditioning contains four parts, compressor, evaporator, condenser, throttle device, refrigerant in circulation in the above four parts, refrigerant compressor out (refrigerant), high temperature and high pressure gas flows through the condenser and cooling step-down, condenser heat to cooling towers to discharge through the cooling water system, cold media continue to flow

Central Air Conditioning Unit Parts Tubular Heat Exchanger Copper Tube Bundle Water-cooled central air-conditioning contains four parts, compressor, evaporator, condenser, throttle device, refrigerant in circulation in the above four parts, refrigerant compressor out (refrigerant), high temperature and high pressure gas flows through the condenser and cooling step-down, condenser heat to cooling towers to discharge through the cooling water system, cold media continue to flow

Oil Separator Tubular Heat Exchanger Used Dry Expansion Type Oil separator, its role is to refrigeration compressor discharge. The lubricating oil of high pressure steam, to ensure the equipment running safely and efficiently.According to reduce the air velocity and points in the direction of air flow change principle of oil, the oil droplet in high pressure steam under gravity separation.General air velocity under 1 m/s, can be contained in the steam above 0.2 mm diameter

Screw Chiller Part Shell And Tube Heat Exchanger Water Cooled Evaporator Shell and tube type cold water machine evaporator due to the heat transfer effect is good, the structure is compact, cover an area of an area small, easy to install, so the application is very extensive.Shell and tube type cold water machine evaporator structure and horizontal shell and tube condenser, the same.Appropriate velocity control, load the refrigerant from the lower end cover, from the upper,

Shell And Tube Liquid Cooler Water Heat Exchangers With Thread Connection Thread Connection Shell and Tube Liquid Cooler Water Heat Exchangers Cooler for petroleum, chemical, textile, metallurgy, electronics, telecommunications and other industrial departments use pneumatic control, pneumatic instrumentation, pneumatic components and the industrial process gas supplied by 40 ℃ or less stable and pulse compressed air.This series high efficiency after cooler is on the basis of

Loose Flange Type Shell And Tube Heat Exchanger For Cooling Unit Using The heat exchange vessel is a container for the heat exchange of the medium. Its wide variety. According to the heat transfer principle, the original heat transfer structure and strengthen the original heat transfer can be classified. According to the principle of heat transfer, heat transfer containers can be divided into two types of direct contact and indirect contact. Indirect contact subdivision is a

Seamless Steel Pipe Shell Water Cooled Heat Exchanger Industrial Refrigeration The heat exchange tube uses copper pipe, nickel-copper alloy tubes, aluminum brass tube and stainless steel tube as the material and the shell uses No.20 seamless steel tube and stainless steel tube. Shell and tube heat exchanger materials are generally carbon steel, stainless steel and copper-based, in which carbon steel tube plate as a cooler, the tube and tube pipe welds often appear corrosion

R404a Shell and Tube Evaporator Heat Exchanger for Industrial Cooling Dry type spiral baffle plate evaporator, flooded evaporator, built-in oil separator condenser, sea water condenser, stainless steel heat exchanger, oil cooler Dry evaporator refrigerant in the heat transfer tube through the cold water in the efficient heat transfer tube outside the run, so the heat exchanger heat transfer efficiency is relatively low, the heat transfer coefficient is only about 2 times the

Leakproof Copper Tube Evaporator Water - Cooled Heat Exchanger Leakproof Copper Tube Evaporator Water - Cooled Heat Exchanger is suitable for water cooled unit,water source heat pump, air cooled pump and air cooled heat pump unit. The product is applying for refrigerants of R22, R134a, R407C and R410A etc. The referigerating medium is for tap water, underground water, river water and sea water or brine, water and glycol solution, sulfate solution, etc. For heat exchange tube,

Energy Saving Water Cooling Evaporator Tube Heat Exchanger for Chiller For shell-and-tube heat exchangers If the process flow diagram does not indicate the direction of the fluid in the nozzle, the following principles should be observed: First, under normal circumstances the heating fluid should be down into the out; the cooling of the fluid should go up and down. Cold fluid and hot fluid should use counter-current layout. Second, with steam heating, for horizontal or

Heat Exchanger Full Liquid Shell and Tube Type Water - Cooled Evaporator Heat Exchanger Full Liquid Shell and Tube Type Water - Cooled Evaporator is suitable for water cooled unit, water source heat pump, air cooled pump and air cooled heat pump unit. The product is applying for refrigerants of R22, R134a, R407C and R410A etc. The referigerating medium is for tap water, underground water, river water and sea water or brine, water and glycol solution, sulfate solution, etc.

Industrial water - Cooled Evaporator Stainless Steel Tube Heat Exchanger Industrial water - Cooled Evaporator Stainless Steel Tube Heat Exchanger is suitable for water cooled unit, water source heat pump, air cooled pump and air cooled heat pump unit. The product is applying for refrigerants of R22, R134a, R407C and R410A etc. The referigerating medium is for tap water, underground water, river water and sea water or brine, water and glycol solution, sulfate solution, etc.

Water to Water Tube Heat Exchanger Water - Cooled Evaporator Condenser and evaporator in the structure can be exactly the same, to see where the use of the. Generally in the unit cooling, the refrigerant evaporates inside, that is, evaporator, refrigerant condensation in the inside, called the condenser. In the case of the same heat transfer medium, the condenser of a single chiller is generally larger than the evaporator and the heat transfer area ratio is about 5.5: 4.5.

Commercial Refrigeration Water - Cooled Shell and Tube Heat Exchanger The equipment is widely used in petroleum, chemical, pharmaceutical, paint and other industrial sectors of the corrosive medium heating, cooling, condensation and other heat transfer process, is the ideal heat transfer equipment. Product Basic Information Product Name HGK-10 Glass-lined Shell Heat Exchanger Operating Temperature (℃) 200 Specifications Model HGK-10 Weight (kg) 861 Heat Transfer Area (㎡) 10

Evaporator Shell and Tube Heat Exchanger for Rooftop Air Conditioning Unit Dry evaporator for freon refrigeration system. In this evaporator, the filling amount of the refrigerant liquid is small, which is about 35% to 40% of the internal volume of the pipe group, and the refrigerant does not have a free liquid surface during the vaporization process. It is widely used in refrigeration and air conditioning, there is the replacement of full-liquid evaporator development trend.

Evaporator Dry Type Heat Exchanger for Rooftop Air Conditioning Unit Evaporator Dry Type Heat Exchanger for Rooftop Air Conditioning Unit is suitable for water cooled unit, water source heat pump, air cooled pump and air cooled heat pump unit. The product is applying for refrigerants of R22, R134a, R407C and R410A etc. The referigerating medium is for tap water, underground water, river water and sea water or brine, water and glycol solution, sulfate solution, etc. For heat