Fiber Ethernet Media Converter

Micro 10/100/1000BASE-T to 100/1000BASE-X SFP Self-Adaptive Fiber Media Converter Gigabit Media Converter Advantages ► USB-powered for portability ► Ultra compact and weigh less than 2 ounces ► Support 9k jumbo frame ► Including a Power Supply ► Smallest media converters available; tuck the unobtrusively behind a PC Copper To Fiber Media Converter Technical Indexes Access mode 10/100/1000Mbps Gigabit Ethernet Standard IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX/FX Fast

USB-powered for Gigabit Micro Mini SFP Media Converter Product Description Overview LNK-M3011-SFP 10/100/1000Mbps adaptive Gigabit Ethernet media converter adopts switching technology to fulfill media conversion. It complies with IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab standards. Presently it supports two types of media network connections: 10Base-T/100Base-TX/1000Base-T, and 100/1000Base-X, inter-converting electrical signals of 10Base-T/100Base-TX/1000Base-T

10/100/1000 BASE-T to 100/1000 BASE-X SFP Media Converter Fiber To Ethernet Built in Power Supply Model: LNK-3012-SFP Series Overview LNK-3012-SFP is equipped with one 10/100/1000BASE-T RJ45 copper and one 100/1000BASE-X SFP fiber optic interface with built-in power supply. The media converter fulfills 100/1000M auto-sensation at fiber optic port, which increase the flexibility of the whole network. The SFP slot of the LNK-3012-SFP is compatible with 100BASE-FX and 1000BASE

10G Base-T to 10G Base-R Media Converter Model: LNK-10G-MC Series Overview E-link 10G Base-T to 10G Base-R Media Converter supports two types media for network connection such as 10GBase-T and 10GBase-FX. The bridge media converter is designed with a 10Gbase Ethernet PHY chip that connects two types segments operation smoothly. This converter can be used as standalone unit or as slide-in module to the 19" converter rack Chassis for use at a central wiring closet. Features

Micro type 10/100/1000Base-Tx to 100/1000Base-Fx Ethernet Media Converter Overview LNK-M3011 series 10/100/1000Mbps adaptive Gigabit Ethernet media converter adopts switching technology to fulfill media conversion. It complies with IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab standards. Presently it supports two types of media network connections: 10Base-T/100Base-TX/1000Base-T, and 100/1000Base-SX/LX, inter-converting electrical signals of 10Base-T/100Base-TX/1000Base-T

Microtype 10/100/1000Base-Tx to 100/1000Base-Fx Ethernet Media Converter Overview LNK-M3011 series 10/100/1000Mbps adaptive Gigabit Ethernet media converter adopts switching technology to fulfill media conversion. It complies with IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab standards. Presently it supports two types of media network connections: 10Base-T/100Base-TX/1000Base-T, and 100/1000Base-SX/LX, inter-converting electrical signals of 10Base-T/100Base-TX/1000Base-T

Micro Mini 10/100/1000BASE-T to 100/1000BASE-X SFP Media Converter LNK-M3011-SFP 10/100/1000Mbps adaptive Gigabit Ethernet media converter adopts switching technology to fulfill media conversion. It complies with IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab standards. Presently it supports two types of media network connections: 10Base-T/100Base-TX/1000Base-T, and 100/1000Base-X, inter-converting electrical signals of 10Base-T/100Base-TX/1000Base-T twisted pairs with

Smart Cloud Managed Gigabit PoE Media Converter 2-Port 10/100/1000Base-TX + 1-Port 100/1000Base-FX SFP Overview LNK-M1200GP-SFP Smart Cloud Managed PoE Media Converter supports two 10/100/1000Mbps Ethernet RJ45 ports and a single 100 or 1000 Mbps SFP port (Auto-Negotiating). Users can use different type of SFP modules(singlemode or multimode fiber, 1 or 2 strands) as needed. The converter provides Power over Ethernet power injector function which is able to drive two IEEE 802

Micro type 10/100/1000Base-Tx to 100/1000Base-Fx Ethernet Media Converter Overview LNK-M3011 series 10/100/1000Mbps adaptive Gigabit Ethernet media converter adopts switching technology to fulfill media conversion. It complies with IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab standards. Presently it supports two types of media network connections: 10Base-T/100Base-TX/1000Base-T, and 100/1000Base-SX/LX, inter-converting electrical signals of 10Base-T/100Base-TX/1000Base-T

4-Port USB 2.0 over Fiber/UTP Extender support all kinds of USB device Model: LNK-U4TF1-2.0 Overview E-link 4 Port USB 2.0 Fiber/UTP Optic Extender support both Fiber and UTP cable transmission. This device breaks through the USB transmission distance limit of no more than 5 Meter, and realizes the extension of USB signal more than 100 Meter through the network cable. The use of optical fiber cable can extend the distance up to 6KM. The device can be widely used in military

Features► 1-Port 10/100BASE-T RJ45 with auto MDI /MDI-X function► 1-Port 100Base-FX SC► Supports IEEE802.3af PoE (15.4W) orIEEE802.3at PoE+(30W)► Supports Link Fault Pass Through► Supports Full/Half-duplex, Auto-negotiation► 9K Bytes Jumbo Frame► 12~48VDC Terminal Block Power Input► Supports DIN-Rail & Wall-mount installation► Environmentally hardened -40°C to 75°C(-40°F to 167°F) operating temperatureOverviewThe LNK-IMC1100P Series provides media conversion between 10

Microtype 10/100/1000Base-Tx to 100/1000Base-Fx Ethernet Media Converter Overview LNK-M3011 series 10/100/1000Mbps adaptive Gigabit Ethernet media converter adopts switching technology to fulfill media conversion. It complies with IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab standards. Presently it supports two types of media network connections: 10Base-T/100Base-TX/1000Base-T, and 100/1000Base-SX/LX, inter-converting electrical signals of 10Base-T/100Base-TX/1000Base-T

CAN Bus Serial RS232/RS485 to Fiber Optic Converter Overview LNK-ICF01 Series is an industrial grade CAN Bus/RS-232/RS-485 to fiber optic converter which converts a standard CAN bus/RS-232/RS-485 signal transceiver to a fiber optic link as to extend the signal up to 2Km on multimode fiber and 80Km on single mode fiber. The use of optical fiber communication solves the problems of electromagnetic interference, ground ring interference and lightning damage. It greatly improves

Profibus-DP over Fiber Optic Converter Optical Transceiver Overview This Industrial DIN-Rail 1 port Profibus-DP Optical Transceiver using large FPGA design using the original technology can support a channel Profibus-DP to fiber optic repeater communication rate 0-12Mpbs. IP40 protection grade wavy aluminum reinforced case 35mm DIN rail mounting AC & DC (9~55V) wide power input power supply redundancy and isolation protection. -40~75°C operating temperature range able to meet

Industrial CAN Bus Fiber Optic Converter compliant with CAN1.0 CAN2.0 standard Overview The CAN-to-fiber converters support all the transmission speeds (transmission rates):0-1Mbps. The CAN optical fiber converter can convert the CAN bus signal into an optical signal and transmit it on the optical fiber, which has the effect of extending the communication distance of the CAN bus. At the same time, the use of optical fiber communication solves the problems of electromagnetic

10/100M Ethrenet to SFP Media converter Model: LNK-1100WSFP Overview LNK-1100WSFP is an Ethernet media converter that converts media transmission between UTP Copper cablings and fiber SFP (Small Form-Factor Pluggable) Transceivers. It complies with IEEE802.3, IEEE802.3u and IEEE802.3x standards. Presently it supports two types of media network connections: 10Base-T/100Base-TX, and 1000Base-FX, inter-converting electrical signals of 10Base-T/100Base-TX twisted pairs with

Multi-mode SC Gigabit Mini Media Converter Model: LNK-3011MN Overview The mini 10/100/1000Base-TX to 1000Base-FX (also can be forced to 100Base-FX) media converter is fully compliant with IEEE802.3U, IEEE802.3z 1000Base-TX/FX protocols. The converter can support auto MDI-MDIX function, flow control for full and half duplex operation, etc. A DIP switch is placed at the bottom of the case. Depend on different configurations; the user can set the different operating mode (Force

30Ch FXO/FXS + 4Ch E1 + 4Ch Fast Ethernet over STM-1 SDH Fiber Multiplexer Overview LNK-SDH-30P8E14FE is compact 1U shelf Multi-Service Access Multiplexer/PCM with Telephone, E1, and Fast Ethernet over 155M STM SDH. It is designed for applications in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers. Features ► Up to 30 channel DS0 / Voice ► Up to 4 port fast Ethernet ► Up to 8 port E1 ► Optical

1-Port Gigabit LAN EPON ONU Model: LNK-EPON-N01 Series Overview E-link mini EPON ONU terminal device , which applies to pure broadband access.It adopts mini-type compact structure design with high-integration and can provide 1 GE(RJ45)interfaces. Supports the technology of layer 2 Ethernet switch and it’s easy to maintenance and manage.It can be applied to FTTH/FTTP access application for resident and business users.and it is fully compliant to technical regulations such as

1-Port Gigabit LAN GPON ONU Model: LNK-GPON-N01 Series Series Overview E-link mini GPON ONU terminal device , which applies to pure broadband access. It adopts mini-type compact structure design with high-integration and can provide 1 GE(RJ45)interfaces. Supports the technology of layer 2 Ethernet switch and it’s easy to maintenance and manage. It can be applied to FTTH/FTTP access application for resident and business users. and it is fully compliant to technical regulations