Optical Transceiver Module

OM2 Cable Length 1m 10G SFP+ to SFP+ Active Optical Cable SFP Optical Transceiver 1. Applications Datacom 10G Ethernet Other high-throughput data transmission network 2. Features 10Gb/s active optical cable up to 100m MMF 850nm VCSEL and PIN receiver Single 3.3V power supply Operating Case Temperature: -5~75℃ Hot pluggable Low Power Consumption Light weight Small Bend Radius Digital Diagnostic Monitor(DDM) All-metal Housing for Superior EMI Performance 3. Description E-link’s

2x1.25G to 2.5G SFP Fiber Multiplexer Model: LNK-FMSFP-2100 Series Overview The LNK-FMSFP-2100 Series Gigabit Fiber Multiplexer aggregates 2 port Gigabit SFP into 1 port 2.5G SFP uplink, reducing the conversion CAPEX and increasing the fiber utilization effectively. The multiplexer can be used either in point-to-point topology functioning as a media converter for transporting two Gigabit Ethernet services over one fiber or in CWDM system working as a wavelength converter for

Handheld Optical Detectors For SFP & SFP+ Optical Transceivers , Fiber Optic Cable Detector Handheld Optical Detector Model: LNK-DT001 Series Overview This Handheld Optical Detector can test 125M -11.3G SFP, SFP+ DAC Cable, SFP+ AOC Cable, integrating optical power meter, bit-error rate tester, DDM Monitor and code board. What is Optical DETECTOR? Portable bit error rate tester (BERT) Portable optical power meter Digital diagnostics monitor SFP/SFP+ A0h/A2h checker Compatibil

10kmSingle Mode Fiber SFP Optical Transceiver Module Support 40Gb / S QSFP+ PSM LR4 Description The E-link LNK-QSFP-LR4-10KM is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for InfiniBand QDR/DDR/SDR,10G/8G/4G/2G fiber channel , PCIe and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3Gbps operation for an aggregate data rate of 40Gbps 10km using single mode fiber. These

40Gb/s QSFP+ eSR4 OM3 Multimode Fiber 300 Meter Optical Transceiver Module Features ●Up to 300m on OM3 Multimode Fiber (MMF) ●Four-channel full-duplex transceiver modules ●Transmission data rate up to 11.3Gbit/s per channel ●Low power consumption

100GBASE-LR4 and OTU4 CFP2 LR4 10km SFP Optical Transceiver Module PRODUCT FEATURES Duplex LC receptacle optical interface Single +3.3V power supply Hot-pluggable Operating optical data rate up to 112Gbps Operating electrical serial data rate up to 27.952493Gbps 4 parallel electrical serial interface AC coupling of CML signals PIN ROSA Low power dissipation(Max:9W) Built in digital diagnostic function Operating case temperature range:0℃ to 70℃ Compliant with 100GBASE-LR4 and

10Gb/s XFP CWDM Duplex LC 1470～1610nm SFP Optical Transceiver Module Features: Support multi protocol from 9.95Gb/s to 11.3Gb/s Hot pluggable 30 pin connector Compliant with XFP MSA Transmission distance of 40km over single mode fiber CWDM EML laser transmitter. Duplex LC connector 2-wire interface for management and diagnostic monitor XFI electrical interface with AC coupling Power supply voltages: +3.3V,+5V Temperature range 0°C to 70°C Power dissipation:

10Gb/s XFP CWDM Duplex LC 1470～1610nm SFP Optical Transceiver Module Features: Support multi protocol from 9.95Gb/s to 11.3Gb/s Hot pluggable 30 pin connector Compliant with XFP MSA Transmission distance of 40km over single mode fiber CWDM EML laser transmitter. Duplex LC connector 2-wire interface for management and diagnostic monitor XFI electrical interface with AC coupling Power supply voltages: +3.3V,+5V Temperature range 0°C to 70°C Power dissipation:

40GBASE-ER4 4 CWDM lanes 1550nm SM SFP Optical Transceiver Module Features Applications 4 CWDM lanes MUX/DEMUX design y 40G Ethernet Up to 11.2Gbps data rate per wavelength y Infiniband interconnects QSFP+ MSA compliant y 40G Telecom connections Up to 40km transmission Operating case temperature: 0~70C Maximum 3.5W operation power RoHS compliant 1. General Description This product is a transceiver module designed for 2m-40km optical communication applications. The design is

3G-SDI CWDM 1270~1610nm 40km Digital Video SFP Optical Transceiver Module Features: Up to 3.3Gb/s Data Links Hot-Pluggable Duplex LC connector Up to 40km on 9/125μm SMF CWDM DFB laser transmitter Single +3.3V Power Supply Monitoring Interface Compliant with SFF-8472 Low power dissipation 2.0V or open, enabled on TDIS

10Gb/s CWDM 1270~1450nm 40km SFP+ ER Optical Transceiver Module Features: Support multi protocol from 9.95Gb/s to 11.3Gb/s Hot pluggable SFP+ footprint Compliant with SFF 8472 and IEE802.3ae Transmission distance of 40km over single mode fiber 1270～1450nm CWDM DFB transmitter PIN Receiver Duplex LC connector 2-wire interface for management and diagnostic monitor Single Power 3.3V supply voltages Temperature range -5°C to 70°C Power dissipation:

XENPAK 10GBASE-LR SC 1310nm DDM SFP Optical Transceiver Module Features Compatible with XENPAK MSA Support of IEEE 802.3ae 10GBASE-LR at 10.3125Gbps Transmission Distance up to 10km(SMF) SC Receptacle 1310nm DFB Laser SC Duplex Optical Connector Hot Pluggable 70-PIN Connector with XAUI Electrical Interface Management and control via MDIO 2-wire interface Power Supply: +3.3V, APS(+1.2V) Power Dissipation 4W Maximum Diagnostic Optics Monitoring Temperature Range: 0~ 70 °C ROHS6

X2 10GBASE-SR SC 850nm 300m SFP Optical Transceiver Module Features Compatible with X2 MSA Rev2.0b Support of IEEE 802.3ae 10GBASE-SR at 10.3125Gbps Transmission Distance up to 300m(MMF) Vertical Cavity Surface Emitting Laser at 850nm SC Duplex Optical Connector Hot Pluggable 70-PIN Connector with XAUI Electrical Interface Management and control via MDIO 2-wire interface Power Supply :+3.3V, APS(+1.2V) Diagnostic Optics Monitoring Temperature Range: 0~ 70 °C ROHS6 Compatible

40GBASE-LR4 4 CWDM lanes 1310 nm SMF 10km SFP Optical Transceiver Module PRODUCT FEATURES 4 CWDM lanes Mux/Demux design Up to 11.1Gbps Data rate per wavelength Up to 10km transmission on SMF Electrically hot-pluggable Digital Diagnostics Monitoring Interface Compliant with QSFP+ MSA with LC connector Case operating temperature range:0°C to 70°C Power dissipation < 3.5 W APPLICATIONS 40G Ethernet Data Center and LAN STANDARD Compliant to IEEE 802.3ba Compliant to SFF-8436 RoHS

10G XFP 1550nm 80km Single Mode Dual LC Connector SFP Optical Transceiver Module Features Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 80km with SMF 1550nm uncooled DFB laser XFP MSA package with dual LC connector No reference clock required +1.8V,+3.3V Supply Voltage XFI and lineside loopback Mode Supported -5ºC to 70ºC Operating Case Temperature Diagnostic Performance Monitoring of module temperature, Supply Voltages, laser bias

10G XFP Single Mode 1310nm 10km SFP Optical Transceiver Module Features Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km with SMF 1310nm uncooled DFB laser XFP MSA package with duplex LC connector No reference clock required +1.8V,+3.3V Supply Voltage XFI and lineside loopback Mode Supported -5ºC to 70ºC Operating Case Temperature Diagnostic Performance Monitoring of module temperature,Supply Voltages, laser bias current,

10G SFP + 1310nm 10km LC Single Mode SFP Optical Transceiver Module Features Supports rate from 1.25 Gb/ to 10.3 Gb/s bit rates Optical interface compliant to IEEE 802.3ae Electrical interface compliant to SFF-8431 Hot Pluggable 1310nm DFB transmitter, PIN photo-detector Operating case temperature: 0 to 70 °C Low power consumption Applicable for 10km SMF connection All-metal housing for superior EMI performance Advanced firmware allow customer system encryption information to

4.25G Single Mode Dual Fiber 10km 1310nm SFP Optical Transceiver Module Features +3.3V single power supply Supports 1.0625/2.125/4.25Gb/s Fiber Channel Operation Gigabit Ethernet compatible 1310nm DFB Laser SFP MSA SFF-8074i compliant Digital Diagnostic SFF-8472 compliant Compatible with RoHS Operating case temperature: Commercial: 0 to +70°C Industrial: -40 to +85°C Applications Tri Rate 1.0625 / 2.125 / 4.25Gbp/s Fiber Channel 1.25Gbp/s 1000Base-LX Ethernet and 1000Base

4.25G SFP Dual Fiber 500m Multimode SFP Optical Transceiver Module Features +3.3V single power supply 550m transmission with 50/125µm MMF, 300m transmission with 62.5/125µm MMF Supports 1.0625/2.125/4.25Gb/s Fiber Channel Operation Gigabit Ethernet compatible 850nm VCSEL laser transmitter SFP MSA SFF-8074i compliant Digital Diagnostic SFF-8472 compliant Compatible with RoHS Operating case temperature: Commercial: 0 to +70°C Industrial: -40 to +85°C Applications Tri Rate 1

2.5G SFP Dual Fiber 1550nm DFB Up to 40km on SMF SFP Optical Transceiver Module Features Up to 2.5Gb/s data links 1310nm DFB laser transmitter and APD photo-detector Up to 40km on 9/125μm SMF Hot-pluggable SFP footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Compliant with SFF-8472 Operating case temperature: Commercial : 0 to +70°C