Anchor and Tensioning Equipment

Introduction: Anchor Cable tensioning machine is an essential tool for coal mine tunnel prestressed anchors in tension installation, ensure that anchor the tension reached prestressed indicators is an important indicator of the success of anchor installation, pneumatic cable tensioning equipment is particularly suitable for coal mine explosion-proof requirements of the occasion. Composition: Pneumatic cable tensioning machine from the tensioning jack, QYB-55-type pneumatic

Usage: used for anchor strength testing, evaluation anchor-plateretaining engineering, special tool anchoring force, resistant to vibration, high performance automatic reset characteristic. Technical parameters: maximum tensile force 100KN-400KN (10T, 20T, 30T, 40T) the maximum stroke 100mm Product use: Use the bolt tension meter is used for coal mine special equipment detection, evaluation of bolt shotcrete engineering strength, anchorage, anchoring quality. Product features

Mainly used for mine, building, tunnel, etc of coal seam and soft rock drilling. In the mining of the coal electric drill has gradually replace now. With the Fried dough twist drill pipe, drill pipe and drill pipe for coal can be used with gas legs. Light weight, easy to use than electric drill. Pneumatic coal drill in coal mine and construction engineering, the coal seam, soft sandstone and shale gas drilling when using handheld and leg dual-use rotary pneumatic coal drill,

MYT series hydraulic roof bolter is driven by hydraulic system and possessing features of reliable performance and simple corollary equipments. It is mainly used in drilling hole in the mine tunnel and tunnel and roof bolting in the coal tunnel. With features of large torque, high rotate speed and low noise, the MYT series hydraulic roof bolter is widely applicable to various geologic condition and environment. Precise designed rotator and scientific flux assignment ensure

Product Introduction 1, Range of use MQT-120/3.2 type pneumatic roof bolter finds widely application on roadways with coefficient of rock hardness f≤10, in particular to anchor support operations, either drills bolt hole on the roof or anchor cable hole, also used in agitation and erection of resin explosive cartridge type bolt, anchor cable, no other equipment to be use can be capable of single-time screwing up bolt nuts for requirements of initial anchor pre-tightening

Descriptions: Anchor Cutter with manual anchor tensioning equipment used for cable installation, exposed strand cutting superfluous, but is prohibited in places of excessive gas content. Cable cutting device can also be one-way manual pump with a small diameter steel cut into separate groups to use for PC strand, anchor. Mining anchor cable (strands) to cut off the appliance has a light weight, easy to operate, with high quality segment, cutting off fast and durable Usage: