Flammability Testing Equipment

3500W NBS Plastic/ Rubber Smoke Density Testing Machine ISO 5659-2:2006 Product Description (note: Other unspecified or conflicting GB/8323.2-2008 standards prevail) The plastic burning smoke density tester is a new test equipment for measuring smoke density, which is based on the technical conditions stipulated in the national standard GB8323.2-2008, which is suitable for measuring the specific light density of smoke produced in the combustion of plastics, and the maximum

220V / AC 50Hz Flammability Testing Equipment Needle Flame Tester Use It used to determine flammability, ignition temperature and fire fatalness for products, which include lighting, low voltage electronic appliances, household appliances, electric tools and instruments. It is also applied to plastics and insulation materials, electric connectors etc. Standards According to IEC60695-2-10~13, IEC829, IEC 60332-2-2,UL746A, DIN695 and VDE0471 standards. Technical parameters

Flammability Testing Equipment , Tracking Index Tester Used range This machine applies to determine the tracking index for electrics of various products, such as lighting, electronics, electric tools and instruments. It is also used for insulators, plastics, electric connectors and so on. Principle In moisture and impurity circumstance, leakage current of insulation will be produced between live parts of different polarity, or between live parts and grounding metals. The

Oxygen Index Flammability Testing Equipment ASTM D 2863, ISO 4589-2 Introduction Oxygen Index Flammability Testing Equipment measures minimum oxygen concentration as necessary when specimen combustion. This equipment’s the oxygen analyser is adapted Paramagnetic Type which has a precise, long life, less error rate and high reliability. TI (Temperature Index Tester) measures temperature index of specimen by heated mixing gases on temperature up to 400℃ in the atmosphere oxygen

Automobile Interior Materials Vertical Flammability Tester , Flaming Resistance Testing Equipment Application Applied to test the flaming of interior material of Automobile, such as cars, carriage and load truck etc. Standard DIN7520 Technology parameters Burning time 0.01～99.99/S/M/H continually timing and setting ,when up to setting value could stop automatically Cover size L385 * W204 * H360mm Control box size 305X320X285 mm Burner I/D is 9.5mm Burner position The center

Halogen Release Measurement Device Application Applies to determine total quantity of halogen-free and low halogen flame retardant cable’s halogen acid gas and measure PH value and conductivity to determine the acidity gas. Main parameter Quartz material tubular furnace heating furnace chamber size L600mm×ф42mm Tubular furnace input power 220V/3.8KW Inner diameter of quartz tube ф34±1mm According to inner diameter of quartz tube gas flow-meter calculate the setting flux ρ=V·

Digital Oxygen Index Tester Box Material Divided Steel Plate Electrostatic Spraying Technical parameters 1.Use imported oxygen sensor, digital display without concentration of oxygen, higher accuracy and accuracy, the range of 0- 100% 2.Digital resolution: ± 0.1% 3.Machine measurement accuracy: 0.4 level 4.Flow adjustment range: 0-10L / min (60-600L / h) 5.Response time: 99%; (user-owned). 16.Power Requirements: AC220 (+ 10%) V, 50HZ 17.The maximum use of power: 50W 18

Plastic Smoke Density Flammability Testing Equipment High Accuracy 2600W Product introduction The smoke density (Ds) test method was performed in accordance with ISO 5660-1 ASTM E 662. The samples were tested in a sealed oven with a radiant heat source of 2.5 w/cm2. Beam attenuation tests were performed under open flame and non-flame conditions, respectively. The entire test was conducted for 20 minutes and the maximum smoke density values for the entire 20 minutes were

Foam Plastics Horizontal and Vertical Flammability Tester with MCU Control Application Suitable for laboratory conditions under the ISO 845: 1985 measured by the density of less than 250kg / m3 of small plastic samples under small flames in the horizontal combustion performance. Standards ISO9772, ISO 97738 Specification 1. MCU control, read the automatic timing. 2. Bunsen light blue flame height: 15mm-100mm can be adjusted, with a flame height scale 3. Sample folder vertical

BS 5438 Vertical Flammability Testing Equipment For Fabrics/ Multi-layer Fabric,Sleepwear Applications This tester is used to test the flammability performance of fabric, multi-layer fabric,fabric assemblies used in dress gowns and sleepear. Performance requirements Three specimens shall be tested in the machine direction and three in the cross direction in accordance with test 3 of BS 5438 using a 10 s flame application time, except that the vertical trip threads shall not

IEC60695 Tracking Index Tester for Led luminaires Testing and Electronic Products Product information Tracking Index Tester is based on IEC60695, GB4207 / IEC60112 and other standards designed and manufactured special detection equipment. It is suitable for the determination of solid insulation material under the wet condition compared with the tracking index and the tracking index of the tracking resistance. It is simple, accurate, reliable and practical. Technical

Tracking Index Tester For Evaluating Leakage Resistance Product introduction This Tracking Index Apparatus is strictly designed and manufactured in accordance with IEC60112,IEC60335-1, IEC60598-1 and GB4207 Measure the relative resistance to traceability of the surface of the solid electrical insulating material when exposed to impurities containing water at a voltage of up to 600 V. When the voltage is applied between the electrode means provided on the surface of the

ASTM D6413 Vertical Flammability Tester for determining the extend of propagation of flame Product introduction Flammability of fabrics may be determined by igniting one end of fabric under test by mean of a suitable burner having a specified flame intensity and determining the extend of propagation of flame and the time taken by the flame to propagate between two marked levels. In the vertical strip flammability tester, a test specimen cut from the fabric under test is

Automatic Flammability Testing Equipment Automatic Interior Materials Burning Tester Application Horizontal Flammability Tester, to determine the comparative burn rates and burn resistance of textiles, particularly those for automotive interior use. Horizontal flammability tester is safe and easy to operate, Comprises draft free stainless steel cabinet with observation window, sample holder and door mounted burner. Automatic gas and timing control system including solenoid

EN71-2 Comprehensive Flammability Tester for Testing Plush Toys Application En71 Toy Integrated Flammability Tester, to determine flammability resistance of finery or toy and children clothing, the toy flammability tester mainly for evaluating the burning speed and time of the following kinds of toys or children stuff. Toys to be worn on the head, such as beards, wig and mask etc. Toy disguise costumes and toys intended to be worn by a child in play, such as cowboy suits,

ASTM D6413 Textile Vertical Flammability Testing Equipment With PLC Controller Product information Flammability of fabrics may be determined by igniting one end of fabric under test by mean of a suitable burner having a specified flame intensity and determining the extend of propagation of flame and the time taken by the flame to propagate between two marked levels. In the vertical strip flammability tester, a test specimen cut from the fabric under test is suspended

CRF 16-1610 Toys 45 Degree Automatic Flammability Test Apparatus / Equipment CRF 16-1610 45 Degree Flammability Tester.pdf Application This machine is suitable for testing the performance of textiles in children's pajamas and pants, or in the hands of consumers or from consumers. Tests for the flammability of textiles used in the manufacture of garments, the introduction of three types of flammability, the determination of the classification of textiles, and the use of single

Solid and Soft Toys Flammability Testing Equipment Nail Bed Flammability Testing Equipment Application The tester is designed for determining the flammability of cloth toys and plush toys, used in the detection of flammability of flammable hair, and recording the burning time, to make a assessment whether the flammability of the burning part meet the requirement of standards. Product information The tester is used as test fixture in the flammability test of solid and soft

IEC60695-11-3 UL94 Horizontal-Vertical Flame ChamberProduct informationHorizontal and Vertical Flammability Testing MachineUL 94 flame chamber. Horizontal flame chamber, vertical flame chamberFor the flammability testing of plastic materials used in consumer electric devices and appliances. Stainless steel construction with black interior and large sliding window for easy viewing. Includes a fully adjustable specimen support and precision gas flow controls. Technical

ASTM D1230 Flammaility Testing Equipment 45 Degree Automatic Flammability Tester Indroduction 45 Degree is used to evaluate compliance of fire-retardant products with fire-retardant performance standards according to the combustion method, and measures combustion characteristics such as After Glow and After Flame of test specimen installed at a 45-degree angle. 45˚ Flammability tests After Flame Time and After Glow Time of specimen by heat in the chamber. This measures flame