Flammability Testing Equipment

ASTM E1623 Intermediate Scale Calorimeter 1.Product Introduction Intermediate Scale Calorimeter,used to measure the combustion characteristics of samples vertically exposed to a specific radiation source 2.Technical parameters 2.1 The equipment includes a radiant plate, a sample mounting bracket, a flue gas collection and sample gas collection system, a gas analysis and data processing system, and a gas supply system; 2.2 The radiant panel mounting bracket is welded by a 50

16 CFR1633 Mattress Heat Emission Tester Product introduction CFR 1633 Mattress Heat Emission Tester. Two indicators should be set to limit the spread of flame on the mattress or mattress set. These two indicators are: the highest mattress/mattress set during the 30-minute test time The peak heat release must not exceed 200 kilowatts (kW), and the total heat release must not exceed 15 mega joules (MJ) during the first 10 minutes of the test. Parameter configuration Flue gas

Drapery Flammability Tester for Test the Flame Retardant Properties of Hanging Fabrics Product introduction NFPA 701 is Standard Methods of Fire Tests for Flame Propagation of Textiles and Films. According to different fabric weight, divided into 1 methods and methods 2. Technical parameters 1.Specified apparatus for all hanging decorative materials weighing less than 21 oz/yd² (700 g/m²). 2.Manufactured with specified ½" marinite panels framed in stainless steel. 3.Meker

Mask Flame Retardant Tester​ Product Introduction This mask flame retardant tester is developed according to GB2626 and is used to test the fire retardant performance of masks. The applicable standards are: GB2626 GB19082 GB19083 GBT32610 YY0469 YYT0969, etc. Technical parameters 1. The mask head mold is made of metal and simulates human facial features according to the ratio of 1: 1. 2.Burner height adjustable 3.Automatic positioning timing 4. Display afterflame time 5.

BS 476-7 Surface Spread Flame Tester for Measuring the Flame Extension of The Wall Product introduction BS 476 Part 7 specifies a method of test for measuring the lateral spread of flame along the surface of the specimen of a product orientated in the vertical position under opposed flow conditions, and a classification system based on the rate and extent of the spread of flame. It provides data suitable for comparing the end-use performances of essentially flat materials,

ISO 871 Plastic Ignition Temperature Tester Application According to the GB4610-2008 plastic hot air furnace method, the temperature is measured and designed. It fully complies with GB4610-2008 and meets the requirements of ISO871-2006. It is used to test the burning and flame retardant properties of plastic materials. GB4610-2008Plastic Ignition Temperature Tester test principle: In the heating chamber of the hot air furnace, the pattern is heated at different temperatures,

Touch Screen Horizontal-Vertical and Needle Flame Burning Machine Product description The horizontal vertical and needle flame burning machine is developed according to the provisions of the standard GB-T2408-2008 for horizontal and vertical burning test and GB5169.5-2008 and GB4706.1-2005 for the needle flame burning test. The new integrated equipment that meets national standards and relevant UL and IEC standards is the only original instrument on the market that neutralize

Paper Gypsum Board Fire Stability Tester (Combustion Test Machine) Application Suitable for thermal stability of paper gypsum board in case of fire Standard: GB/T9775-99 Technical parameters The tester consists of an experimental design consisting of a test part and a control part. The test casing and important parts are made of stainless steel, which is resistant to smoke and gas. The control system is highly automated, With automatic ignition function, temperature and time

Door Roller Blind Fire Tester Uses It is suitable for the fire resistance test of the building with the door, the door and the roller blind. The fire resistance limit is determined by experiment. Technical parameters 1. Working voltage: AC 380v ± 10% 50hz; electricity consumption: 3kw 2. Furnace pressure measurement range: 0-100pa measurement accuracy: ≤ ± 3pa 3. Air flow: 0-50m3 / min measurement accuracy: ≤ ± 0.5 m3 / min 4. Combustion gas source: propane, liquefied gas 5.

Wood Raft Flame Retardant Wood Burning Test Device Application It is suitable for testing the burning quality loss rate and flaming burning time of wood actually used in various production and engineering with a thickness of 20mm or more under the specified combustion conditions. Technical Parameters This machine has automatic ignition, automatic timing, automatic reset function; The burner consists of a 50mm diameter nozzle and regulating valve, switching valve Thermocouple:

Conveyor Belt Vertical Burning Test Machine Use Applicable to the evaluation of the burning performance of textile core conveyor belt and steel core conveyor belt. Standard In line with ISO340:2004 standard. Technical parameters Automatic torch propulsion and lifting system; The inner diameter of the nozzle 9.6mm Air supply mode the fan automatically supplies air, and the air supply time is 60S Air supply wind speed 1.5M/S Electronic anemometer test range 0~8M/S TES

Vertical Horizontal Combustion Test Machine for Foam Application Suitable for evaluating the relative combustion properties of small samples of foam (foam rubber) under laboratory conditions. Second, in line with the standard Standards: HBF, HF-1 and HF-2 of ISO3582 and UL94. Technical parameters 1. The dimensions of the test box: length 600mm, width 300mm, height 760mm see Figure 1 2. Timer: 0~99.99S can be set arbitrarily. 3. Combustion gas: gas 4. Burner: Bunsen burner. A

Conveyor Belt Roadway Propane Combustion Performance Test Device Uses Propane burning performance test device for conveyor belt roadway is suitable for propane combustion performance test of coal mine fabric whole core flame retardant conveyor belt. Overview Compatible with the propane combustion performance test of the roadway in accordance with MT914-2008 "Coal core fabric flame-retardant conveyor belt". This equipment is control box adopts relay control system. All

Insulation Material Maximum Use Temperature Tester Uses Applicable to the evaluation of the maximum service temperature of insulation products such as loosely filled insulation materials, felts, carpets, blocks, plates and prefabricated insulation tubes. Technical Parameters 1. Heating plate: Made of SUS304 stainless steel, the test area is 900*450mm, surrounded by protective layer and width 80mm. On the lower surface of the heating plate, no less than five thermocouples

Thermal Insulation Rock Wool Thermal Load Test Device Application Suitable for rock wool, slag wool and glass wool and products. Under a fixed load, the sample is heated at a certain heating rate to achieve a specified thickness shrinkage rate, and the thermal load shrinkage temperature is determined by interpolation by calculation. Compliance with standards Meet the GB/T11835 standard. Technical Parameters The thermal load test device consists of a heating furnace, a heating

Flame Retardant Wood Burning Test Device Application Indoor decoration wood products burning experiment Standard GA/T42.2-92 standard Technical parameters Ambient temperature: -5 ° C - 30 ° C; Ambient humidity: ≤ 70% Operating voltage: AC 220 V ± 10V; Microcomputer control; automatic ignition, timing; real-time temperature display; data printing. Gas source: natural gas, liquefied petroleum gas; Timing accuracy: 0.1s; Temperature error: 180±10oC; Electronic balance: weighing

16 CFR 1611 Vinyl plastic film flammability tester ,SPI Flammability Tester Product information SPI Flammability Tester, to determine the ignition properties of vinyl plastic film material according to CFR 16 Part 1611 - U.S.A. Flammable Fabrics Act for flammability of apparel vinyl plastic film. The rate of burning shall not exceed 1.2 in./s as judged by the average of five determinations lengthwise and five determinations transverse to the direction of processing, when

Vertical Flame Resistance Textile Apparatus Use This apparatus is used to evaluate the flame resistance of fabric, multi-layer fabric,fabric assemblies used in dress gowns and camping tentage. Specification Dimension 760x330x330mm Bottom steel plate 420x80x3.2mm Top Steel plate 420x80mm Burning angle: 25° or 90° Flame height: 30mm ± 2mm to 50mm±2mm (adjustable) Apply to CPAI-84 a specification for flame resistance materials used in camping tentage The Methane gas purtity 97%

Textile Fabrics Vertical Fire Testing Equipment CFR 1615/1616 For Knitted Fabric Application Textiles vertical flammability test apparatus is applied to test the burning behaviour of woven fabric, knitted fabric, coated fabric and Laminated products. The equipment is designed according to JIS1091-1992. Standards CFR 1615/1616 standard for the flammability of children's sleepwear CA TB117 Requirements, Test Procedure and Apparatus for Testing the Flame Retardance of Resilient

Automotive Interior Material Vertical Combustion Tester Product introduction According to the standard GB32086-2015 “Technical Requirements and Test Methods for Vertical Burning Characteristics of Certain Types of Automobile Interior Materials”, it fully satisfies the technical requirements specified in the national standard GB32086, and is applicable to curtains for M3 automotive interiors carrying more than 22 passengers. Sun blinds and or other internal suspension