Mixer

Descriptions: This machine is composed of container, screw stirring paddles and transitional parts; the screw paddle are generally made into 1 layer or 3 layers, the outer screw converge is the material to the centre front two sides, and the inner layer of screw conveys the material to the two sides from the centre, so as to form convection mixing. The cubage can be made into rotundity, so the jacket can be played in reaction and drying. Features: Big coefficient of loading,

Principle: EYH Series Two Dimensions mixer mainly consists of three big parts. rotating cylinder,swinging rack and frame. The rotating cylinder lies on the swinging rack,supported by four wheels and its axial fixation is done by two stop wheels Two of four wheels are driven by rotating system to make the cylinder rotate. The swinging rack is driven by a set of crandshaft swinging bar which is mounted on the frame and the swinging rack is supported on the frame. Features: The

Descriptions: CH series notch shaped mixer is widely used for mixing powder or wet materials, and can make the materials in different proportions mixed uniformly. The parts of the machine which contact with materials are made of stainless steel. The gap between blades and the inner wall of the cylinder is very small, so there’s no"dead corner" in mixing. Seal devices are fixed on both ends of the stirring shaft to prevent the materials from rushing out. Feed hopper is

Descriptions: ● Our factory researched and manufactured Model VI forced stirring mixer on the basis of absorbing abroad high technology. ● This machine can mix fine powder, caked or more two powder raw materials, raw material containing certain moisture. Particularly it can also mix raw material that needs to add small amount of additive and satisfied effect can be got too. Technical parameters: Model Productive capacity (kg/time) Total volume(m3) Mixing time(min) Power (kw)

Descriptions: This machine is suitable for mixing two or more dry and powder or granule raw materials from pharmaceutical industry, chemical industry, foodstuff industry and so on. The structure of this machine is unique. Its mixing efficiency is high and no dead corner. It is made of stainless steel. Its inner and outer wall is processed through polishing. Its appearance is beauty. Its mixing is uniform. Its scope of application is wide. The forced stirrer can also be

Descriptions: The central screw and the outer ribbon are connected to the cycloidal needle wheel reducer, and rotate at an identical revolution. In operation, the central. In operation, the central screw lifts the material from bottom to top. mean while, the ribbon with a higher linear velocity sprials to lift the material from bottom to top along the cone wall. The two kinds of motions make the material be thrown into the space tangentially. and the material effects strong

Descriptions: The material is made to conduct a compound motion in the cone because of the rotation and revolution of the screws. The effected motions include: 1. The revolution of the screw along the wall making the material conduct a circumferential motion; 2. The rotation of the screw making the material rise along the screw from the cone bottom; 3. The compound motion of the ratation and revolution of the screws making partial, material be absorbed into the screw

Applications: This machine is suitable for many industries such as pharmaceutical industry, chemical industry, metallurgy industry, foodstuff industry, architecture industry and institutes, It can mix powder and granule raw materials having good fluidity and make the mixed raw materials reach the best mixing state. Features: Because the mixing drum has multi directional motion, it makes raw material inside the drum has many cross-mixing points, therefore the mixing effect is