Hydrocyclone Desander and Desilter

Description of Solids Control Hydrocyclone Desilter Hydrocyclone desilter is the 3rd phase equipment in solids control system.It adopts the hydrocyclones' centrifugal force to separate the fluid and water. Detailed information of drilling fluid service desander 1).Sand size solids removal (12~47 microns) 2).Polymeric cones 3).Lightweight, compact 4).Lifting eye welded to frame 5).4", 5" desilter cones 6).lower noise and long usable 7).The balanced feeding design keep it

Description of Hydrocyclone Desander in Solids Control CSQ seriesHydrocyclone desander is 2ndsolids control equipment. Mainly use 8”,10”, 12” desander cones. Desander is to separate particle sized 47~76μm. The treating capacity and cones configuration depend on client’s demand. OGEM desander is widely used in oil and gas drilling, HDD, slurry separation, etc. industry. Technique parameters Model CSQ200 CSQ250 CSQ300 Treating capacity ≤120m3/h ≤528GPM ≤180m3/h ≤792GPM ≤240m3/h

Description of Hydrocyclone Desilter Hydrocyclone desilter is the 3rd phase equipment in solids control system.It adopts the hydrocyclones' centrifugal force to separate the fluid and water. Detailed information 1).Sand size solids removal (12~47 microns) 2).Polymeric cones 3).Lightweight, compact 4).Lifting eye welded to frame 5).4", 5" desilter cones 6).lower noise and long usable 7).The balanced feeding design keep it working very well Technical parameters of hydrocyclone

Description of Hydrocyclone Desander CSQ seriesHydrocyclone desander is 2ndsolids control equipment. 2. Mainly use 8”,10”, 12” desander cones. Desander is to separate particle sized 47~76μm. The treating capacity and cones configuration depend on client’s demand. OGEM desander is widely used in oil and gas drilling, HDD, slurry separation, etc. industry. Technique parameters Model CSQ200 CSQ250 CSQ300 Treating capacity ≤120m3/h ≤528GPM ≤180m3/h ≤792GPM ≤240m3/h ≤1056GPM