Electrical Safety Tester

1. Application: Ball pressure tester is used for testing parts of non-metallic materials for resistance to heat. It is applicable to electro technical equipment, its subassemblies and components, and to solid electrical insulating materials except ceramics. In this test, a conditioned specimen is placed on a preheated support and subjected to a force of 20n applied through a 5 mm steel ball. The test stand, specimen and loading device are then kept in an oven at an elevated

Model: AUTO-PANS SApplication: 1.one set with 5 pieces, the diameter is :110mm,145mm,180mm,220mm,300mm 2.base and wall thickness:2mm±0.5mm 3.The vessel is made of low carbon steel having maximum carbon content of 0.08%. 4.It's cylindrical without metallic handles or protrusions, the diameter of the flat area of the base of the vessel is to be at least the diameter of the cooking zone. The maximum concavity of the base of the vessel is0.006d.the base of the vessel is convex. 3

Model: AUTO-PANS Standards: IEC60335-2-9 clause 3 figure 103 & figure 104 Application: 1.one set with 5 pieces, the diameter is :110mm,145mm,180mm,220mm,300mm 2.base and wall thickness:2mm±0.5mm 3.The vessel is made of low carbon steel having maximum carbon content of 0.08%. 4.It's cylindrical without metallic handles or protrusions, the diameter of the flat area of the base of the vessel is to be at least the diameter of the cooking zone. The maximum concavity of the base of

Model: AUTO-PANS Standards: IEC60335-2-9 clause 3 figure 103 & figure 104 Application: 1.one set with 5 pieces, the diameter is :110mm,145mm,180mm,220mm,300mm 2.base and wall thickness:2mm±0.5mm 3.The vessel is made of low carbon steel having maximum carbon content of 0.08%. 4.It's cylindrical without metallic handles or protrusions, the diameter of the flat area of the base of the vessel is to be at least the diameter of the cooking zone. The maximum concavity of the base of

1. Application: Ball pressure tester is used for testing parts of non-metallic materials for resistance to heat. It is applicable to electro technical equipment, its subassemblies and components, and to solid electrical insulating materials except ceramics. In this test, a conditioned specimen is placed on a preheated support and subjected to a force of 20n applied through a 5 mm steel ball. The test stand, specimen and loading device are then kept in an oven at an elevated

Lab Equipment IEC60335 Water Spillage Testing Machine Used for Refrigerating Appliances Introduction: This spillage tester(water spillage test apparatus) is designed and manufacture according to IEC 60335-2-24 and IEC60335-2-89 clause 15 figure 101 and other similar international standards. It is used for for testing refrigerating appliances and consists of the vessel, removable bridge support, release pin, and displacement block. Technical Parameter: Displacement block

IEC60558-1 Fig6 and IEC60065 Fig14-16 Mandrel Test Equipment This test is conforms to IEC60558-1 Fig6 and IEC60065 Fig14-16.The test shall be performed by fixing the specimens of thin sheets on a mandrel made of nickel plated steel or brass with smooth surface finish. A metal foil shall be placed closely to the surface of the specimen and subjected to a pull force of 1 N. The metal foil shall be so positioned that its borders are 20 mm away from the borders of the specimen,

1.Standard compliant: Our Dielectric strength testers are strictly designed and manufactured according to IEC60065, GB8898 and UL1310 standards requirements. 2.Application: It is mainly used for testing thin-layer insulation material electric strength. Stand part of the test device using the whole structure,made use of 304 plate material processing. 3.Features: To improve the insulation board and creepage dielectric properties,surface brushed polished, bottom bracket the

Model: AUTO-DFZ Standards: IEC60598-1 Appendix D, GB7000.1-2007 Application: windscreen lighting products suitable for quality control testing agencies and departments to provide a standard environment factory lighting products for temperature measurement. Appendix D major components: 1.Case Material: 1mm cold (no glossy black coating) 2.bottom material: 18mm plywood (surface spray black) 3.the top fixture: Install the crossbar at the top of the cross-linked 4.20 other

Model: AUTO-ST2 Standards: GB4943.1-2011-2.10.8.4,IEC60950-2.10.8.4, GB4706.1-21.2 and IEC60335-1-21.2 standards. Application: It is applicable to solid insulation appliances and similar products of accessible parts or PCB scratch test to ensure that the material has sufficient strength without being sharp tool pierced.This machine adopts PLC + touch screen control system, stepper motor drive, scratches from scratches and scratches speed can be preset times, 90 ° angle

Introduction: Temperature Measuring Board IEC60335 conform to IEC60335-1:2004 and GB4706.1-2005 can be used to the temperature test of all kinds of electronic products supply, in conformity with the standards requirement of the environmental conditions. Autostrong Temperature Measuring Board IEC60335 is used for the measurement of the temperature radiated by different equipment during the tests from heating and abnormal operation. One is designed and made with the intention

Application: Inclined Plane Device is used to test the stability of an apparatus that requires a surface in order to work. The device cosist of a surface and an angle adjusting device with 0- 15 °. Technical Parameters Types Surface Diameter Angle Range Bearing Capacity Rotate Way AUTO-3 1000mm 0-30 ° 125KG hand-actuated/dynamoelectric AUTO-2 800mm 0-30 ° 80KG hand-actuated/dynamoelectric AUTO-1 600mm 0-45° 50KG hand-actuated Standard: To determine the stability of electric

1.Specifications High Quality Electrical Torsion Tester in China 1.IEC60598-1,IEC60061-3,IEC60968; 2.Special torque range customized; 2.Technical Parameters: Feature: fixing with clamp,rotatint the lamp the positive and negative torque rate will be recorded; Torque range0-10 N.m (special range provided) Lamp capE27/E26 E14/E12 B22D/G5 G13, E40 (optional) FeaturePeak torque holding function,limit can be set for alarm ReferenceIEC 60598-1-2008,IEC60061-3:2004,IEC60968-1. 3.

1.Application: Socket-outlet Torque Balance is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus. Socket-outlet Torque Balance is a device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets.The balancing arm of the test apparatus pivots about a horizontal axis through the centre lines of the contact tubes of the socket-outlet at a