CZ steel Forming Machine Series

Hydraulic drive C-beam machine main parameters: 1, the host molding roll 13 rows. Length of 10 meters. Adjustment range 80-300mm waist high adjustment range 35-100mm 2, the host frame with 400H steel 3, the host runs 16 meters per minute. Optional mold cut off the punching and flying saw cut off the punching 4, the hydraulic station motor power 22KW as the host drive. Punching cut off the power. 5, the electrical cabinet was used Taiwan Delta PLC. Touch screen control

Z-shaped steel molding machine is mainly composed of passive discharge rack, discharge rack base, leveling device, forming host, punching device, forming cutting device, hydraulic station, computer control cabinet and other parts. Z-type steel forming machine main technical parameters: Installation Dimensions: 23000 × 2400 × 1400mm Host: 10000mm * 2000mm * 1000mm Pipeline full length; 17-20m Electronic control system: the whole machine using PLC frequency control Host power:

C-type steel purlin molding machine host parameters: 1. Host size: 8 meters long, 1.5 meters wide, 1.2 meters high 2. Host weight: about 5.2 to 5.6 tons 3. Main motor power: 11kw 4. Reducer: planetary cycloid reducer 5. Large frame: 350mm GB H-beam 6. Chain chain chain: 2-inch chain chain 7. Medium plate thickness: 18mm 8. Spindle: Material: 45 # steel, shaft diameter: after processing φ80mm, after quenching and tempering processing 9. Leveling machine: nine roll leveling, 45

Main technical parameters of 1, the installation size: 13500mm × 2200mm × 1500mm 2, forming Road: 13-15 Road 3, roller material: Gcr15 4, the host power: 11KW 5, the hydraulic station power: 11KW 6, hydraulic station pressure: 18-20Mpa 7, forming speed: 9-10m / min. 8, cutter punching material: Cr12 9, electronic control system: industrial computer PLC frequency control 10, plate thickness: 1.5-3.0mm 11, rolling specifications: 80-300 in the