Ethernet Media Converter

10/100/1000M 1310/1550nm SM Simplex WDM Bidirectional Gigabit Fiber Optic to RJ45 Media Converter Description 10/100/1000M adaptive fast Ethernet optical Media Converter is a new product used for optical transmission via high-speed Ethernet. It can be used anywhere in the network to integrate newer technology with existing equipment to support new applications, technologies and future growth. Instead of costly, across-the-board upgrades, media converters can extend the

10/100/1000M 1310nm 20km dual Fiber Optic to rj45 media converter Description 10/100/1000M adaptive fast Ethernet optical Media Converter is a new product used for optical transmission via high-speed Ethernet. It can be used anywhere in the network to integrate newer technology with existing equipment to support new applications, technologies and future growth. Instead of costly, across-the-board upgrades, media converters can extend the productive life of the existing

10/100Mbps Fiber optical 2km Multi mode simplex media converter Description Media converters can be used anywhere in the network to integrate newer technology with existing equipment to support new applications, technologies and future growth. Instead of costly, across-the-board upgrades, media converters can extend the productive life of the existing cabling as well as the active equipment. Transcom supply 10/100Base Ethernet Fiber Media Converters, 1000Base Gigabit Fiber

10/100 fiber media converter dual fiber sm 20km 40km 120km RJ45 optical convertor Description Media converters can be used anywhere in the network to integrate newer technology with existing equipment to support new applications, technologies and future growth. Instead of costly, across-the-board upgrades, media converters can extend the productive life of the existing cabling as well as the active equipment. Features -10/100 BASE-T/TX electrical port -100 BASE-SX/LX optical

10/100M fiber fast ethernet single fiber optic duplex media convertor 20km Description TS Series are non-managed media converters, which give you economic solutions for media conversion between fiber and copper Ethernet. It provides you SC,FC or ST connectors for your fiber optic cables and RJ45 for twisted pair UTP cable connection.The maximum extension is up to 120km over fiber. Features * In conformity to IEEE802.3 10base-T, IEEE802.3u 100 base-TX/FX, IEEE802.3ab 1000 base

10/100/1000M Ethernet fiber optic media convertor Digital Fiber Optic Transmitter and Receiver Description Optical transceiver is an Ethernet transmission media transfer unit that switches short distance double stranded electrical signals and long distance light signals. Features Automatic-compatible with 10Mbps, 100Mbps and 1000Mbps, easy for upgrading network Unique IC solution applied Supports 10/100Mbps and 10/100/1000M full/half duplex and auto-negotiations ,easy

10/100M Dual Fiber Single mode optic Media Converter with 2 RJ45 ports/2 ports fiber optic media converter/media convert​ Features: 1. Support Tag-VLAN,Port-VLAN 2. Support 10/100Base TX to 100Base FX,can be connected to relational networking equipments .; 3. With 128Kb RAM; 4. Support Automatic Switch between parallel lines and crossed lines . 5. With LED Lamps function .(link/activity, 10/100M,power) 6. Support select working-mode via Hyper terminal . 7. The transmission

SFP Slot Stand-alone Unmanaged 10/100/1000M Fiber Media Converter with DIP Switch Parameter Specifications Access mode 10/100/1000Mbps Gigabit Ethernet Standard IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit thernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree Wavelength Any wavelength according to the chosen SFP modules Port 1 RJ45 connector, connected to STP/UTP category-5 twisted pair

Unmanaged 10/100M Fiber Fast Ethernet Media Converter 1310nm SM 20Km SC Overview IEEE802.3/u Ethernet supports two types’ media for network connection such as 10/100Base-TX and 100Base-FX.The bridgemedia converter is designed with a switch controller and buffer memory that connects two types segments operation smoothly.This converter can be usedas standalone unit or as slide-in module to the 19’’ converter rack Chassis for use at a central wiring closet. Converter Type Stand

10/100/1000M gigabit fiber to rj45 converter sfp media converter 1 sfp 1 rj45 ethernet ​ Description The HRUI Ethernet media converters are designed to transmit and receive 10/100 /1000Mbps data over single mode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, 100 Mbps ,1000MEthernet rate without any adjustments. The optical interface operates at a 1000Mbps Ethernet rate. LED indicators are provided for rapidly ascertaining equipment operating status.

Fiber Optic 10/100/1000M Media Converter With 2 SFP Ports & 4 RJ45 Ports/10/100/1000M Ethernet SFP Media Converter/fi Product Description SPECIFICATION: 1. Supports 10/100/1000Base-T, 1000Base-X protocol. 2. Flow control for full duplex and half duplex. 3. Supportsup to 10k byte JUMBO frame. 4. Suppots Fiber Port Trunking, Increasing Fiber Channel Bandwidth and Supply Fiber Channel Redundancy. 5. Supports Ports Based VLANS and TAG Based VLANS. 6. In conformity to safety code

1310/1550nm Single Mode Single Fiber WDM Bidirectional 20km Gigabit 10 100 1000 fiber media converter GENERAL DESCRIPTION 10/100/1000M adaptive fast Ethernet optical Media Converter is product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100 Base-TX/1000 Base-Fxand 1000Base-FX networksegments,meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users’ needs,

100M Media Converter Multimode Dual Fiber 4 Fiber port+1 Ethernet port Key features • Plug and play, high performance, Low power consumption • Complies with IEEE802.3 (10BASE-T) and IEEE802.3u (100BASE-TX/FX) standards • Electrical port supports Auto-Negotiation for 10Mbps or 100Mbps, full duplex or half duplex data. • Automatic MDI/MDI-X crossover • Distances up to: 2 km Multimode, 120 km Single Mode • ST, SC, FC optical connectors • AC/DC powered • Status LED's for TX , FX

10/100M Fiber Ethernet Media Converter/10/100M 1 SC port+ 2 RJ45 ports/10/100M View The Ethernet media converters are designed to transmit and receive 10/100Mbps data over multimode or single mode optical fiber. The electrical interface will Auto-Negotiate to a 10Mbps, or 100Mbps Ethernet rate without any adjustments. The optical interface operates at a 100Mbps Ethernet rate. LED indicators are provided for rapidly ascertaining equipment operating status. Key Features 1. Plug

Fiber Optic 10/100/1000M Media Converter With 2 SFP Ports & 4 RJ45 Ports/10/100/1000M 2SFP 4RJ45 Ethernet SFP SPECIFICATION: 1. Supports 10/100/1000Base-T, 1000Base-X protocol. 2. Flow control for full duplex and half duplex. 3. Supportsup to 10k byte JUMBO frame. 4. Suppots Fiber Port Trunking, Increasing Fiber Channel Bandwidth and Supply Fiber Channel Redundancy. 5. Supports Ports Based VLANS and TAG Based VLANS. 6. In conformity to safety code of FCC and CE MARK. Package

10/100M auto-negotiation Media Converters single mode dual fiber 40KM FC SC port Product Description Fiber media converter be used to tramsmission Ethernet electric signals into optical signals,the features is transmit and receive optical signals in-phrase by pair of fiber optical cable,due to the signal transmission is light pulse form, so relative to the metal wires are incomparable advantages: high security, reliability, transmission speed, long distance, low cost, saving

Telecommunication equipment 10/100M Ethernet Media Converter Dual fiber 20KM Introduction The TS-100-SD-20​ Ethernet media converters with external power supply are 10/100Mbps auto-sensing and utilize fiber optics to extend the physical distance range of typical Ethernet links (100m) to 20km on SMF. Key Feature 1. 100BASE-FX FIBER to 10/100BASE-T COPPER Ethernet conversion 2. Auto-MDI/MDIX copper RJ45 port 3. 1600byte super data packet transmission 4. Full duplex-flow control

10/100/1000M RJ45 Ethernet Media Converter single multi mode simplex duplex Description The Transcom Ethernet media converters are designed to transmit and receive 10/100 /1000Mbps data over single mode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps,100Mbps ,1000MEthernet rate without any adjustments. The optical interface operates at a 1000Mbps Ethernet rate. LED indicators are provided for rapidly ascertaining equipment operating status. Features 1

Stand-alone Unmanaged Gigabit Ethernet Media Converter, 1x 10/100/1000Base-T RJ45 to 1x 1000Base-X SFP Slot LED function status Description DUP UTP port duplex LED ON Full duplex OFF Half duplex FP-LINK Fiber port link/action status LED ON Fiber link is ok. OFF Fiber link is fail. PWR Power LED ON Power is ON. OFF Power is Fail. RX UTP port link/action status LED ON The TP link in ok Blink Data is been received or transmitted OFF The TP link in fail 1000 UTP port speed LED ON