Sheet Metal Decoiler

Automatic feeder, auto parts stamping, Ruihui automatic feeding equipment www.ruihui.net1. The action mode of the automatic feeder is circular motion of the roller, instead of the linear motion of the four guide columns, the automatic feeder will not have a seizure phenomenon;2. The automatic feeding machine with high degree of automation has: a moving head type feeder controlled by a computer, a laser feeding material feeder, a high pressure air pressure and a computer

Mechanical equipment, stamping processing, Guangdong Ruihui CNC feeding machine www.ruihui.net The CNC feeder is short for digital control and is an automation with a program control system. The control system can logically process and decode the program with control code or other symbolic instructions to operate the CNC bending machine and machine the part. CNC feeders are used in a wide range of applications. Nowadays, in the electronic age, many companies have chosen more

CNC feeding machine, auto parts stamping, Ruihui punch automatic feeding www.ruihui.net The reasons for the inaccurate feeding of the high-speed roller feeder are: 1. The material thickness adjustment is not adjusted well, which causes the roller press material to not slip tightly. For different material thicknesses, the thickness of the feed material of the feeder should be adjusted in time. 2. When the thickness of the material is thick, the pressure spring of the roller

Air feeder feeding length, sheet metal stamping processing, Ruihui automatic feeder www.ruihui.netThere may be the following reasons for the inaccurate feeding of the air feeder:1. The speed of the air feeder is too fast: adjust the speed control screw of the blower clockwise.2. The length adjustment of the feed port of the air feeder is not accurate: adjust the feeding length, and the fine adjustment screw should be locked in time.3. the air pressure is unstable: check the

Pneumatic feeder, double end uncoiler, Dongguan Ruihui feeder feeding step Solution for unstable feeding of pneumatic feeder: 1. The problem of the mold itself causes the feeding to be unstable. Solution: Manually check whether the mold has resistance when feeding, if necessary, re-mold. 2. The air pressure outside the pneumatic feeder is unstable, resulting in unstable feeding. Solution: Check the external air supply to ensure the air pressure is stable. 3. the pneumatic

Material rack, coil unwinder linearizer, Ruihui coil straightener sales There are many types of material racks, but the traditional high-speed unwinding is only a flat electronic feeder. However, the flat electronic feeder can only be used for unwinding of thin and narrow materials, and the weight is small and the outer diameter of the reel is customized. The degree of chemicalization is low, and it has become increasingly unable to meet the needs of modern high-speed

Feeder, stamping sheet, Ruihuipneumatic straightening machine When the stamping automatic production line processes the sheet, in most cases, the continuous sheet is not cut after punching. The traditional method is to manually cut the scrap and then pile it up and then dispose it as garbage, which not only causes the stamping workshop. Dirty, affecting normal production, but also greatly increased the labor intensity of operators and reduced economic benefits. At present,

Plate leveler plate leveling machine,Ruihui pneumatic straightening machine In the continuous stamping process of the feeder matching punching machine, the high-speed processing of the punching machine will cause the temperature of the die and the stamping material to rise rapidly. At this time, the material fed into the die must be lubricated. If the material fed by the feeder is not directly lubricated with lubricating oil, it will not only affect the surface finish of the

Automated uncoiler, Volkswagen parts stamping, Dongguan servo feeder Heavy material rack loading is mainly carried out by forklift or driving to the heavy material rack shrinking reel, and then unwinding. After the current reel is completed, it needs to stop and wait for the material roll next to the material rack. The forklift is transported to the heavy-duty material rack and the coil is sent to the material rack by the crane. The insufficiency caused by this is not only

Precision nc feeder straightener 3 in 1 for punch, Ruihui feeder equipment Solution for the deviation of pneumatic feeder material: 1. The mold is not properly installed in place, causing the material to run off when feeding. When installing a small mold on a large punching machine, the mold installation is often not in place. At this time, the center line of the mold is not on the same line as the center line of the feeder, and the deviation is inevitable. At this time, the

Feeder, unwinding equipment material frame, Ruihui stamping processing automation The origin of the name of the three-in-one feeder: The automated process of stamping processing is divided into several stages. First, the material needs to be unloaded by a special unwinding equipment material frame to carry out the second step of processing. Secondly, the material that is wound and packed will inevitably generate a large internal stress. If the internal stress is not leveled

Material frame, machine to straighten wire, Ruihui automatic stamping equipment Heavy-duty material frame is the most used material discharging and unwinding equipment in the stamping industry. It has been widely favored by stamping owners because of its large bearing capacity, wide application range, simple operation, stable performance, high degree of customization and affordable price. Heavy-duty material racks can be used in a wide range of applications from tens of

Gear feeder, Dongguan Ruihui high quality uncoiling machine for coil The installation of the gear feeder is divided into five major steps: 1. According to the requirements of the stamping process, determine the feeding direction and installation position of the gear feeder. 2. Determine the position of the center line on the side of the punching table of the punch feeder. 3. Align the center line of the mounting bottom plate of the gear feeder with the center line of the side

Material frame, silicon steel coil stamping, Ruihui punch feeder machine In the process of stamping and processing of the motor stator and rotor, silicon steel bars are needed to make a large number of silicon steel punching sheets, and the raw material reserves of the silicon steel strips are in the form of silicon steel coils. In the process of punching silicon steel sheets, the silicon steel coils need to be The material frame rotates continuously. Thereby, the silicon

Disc feeder, automatic coil straightening machine, Dongguan leveling machine As the only horizontal material rack in the stamping industry, the disc feeder is a racking equipment specially developed for thin plates, narrow materials and high-speed stamping. It has a fast unwinding speed and is not limited by the inner diameter of the material. Roll stacking, easy operation, variable frequency speed control to achieve perfect speed synchronization, will not cause any scratches

Material frame, sheet metal pneumatic feeder, Dongguan stamping peripheral automation Heavy-duty material frame This single-axis discharging method ensures uniform torque. The main shaft can only be placed in the center of the base. This will not cause the loosening and tilting of the rotating shaft, but it will cause inconvenience in charging. Ruihui double-head material rack is a new rack equipment that can solve the cumbersome material loading and time-consuming materials.

Automatic stamping processing of thick plate materials, Ruihui three-in-one feeder 1. Wide application range, making automatic stamping processing of thick plate materials possible. The three-in-one feeder is in fact an automation device specially developed for the automated processing of thick-plate materials. It can not only process the thin plate and middle plate materials which can be processed by the traditional stamping automatic production line, but also can process

Three-in-one feeder, punching machine sheet metal, Ruihui stamping automation equipment The three-in-one feeder is a collection of unwinding, leveling and feeding of Ruihui Machinery based on the cutting-edge technology of internationally renowned companies such as Switzerland and Germany, combined with the experience of more than ten years of feeding machine production. Three large-scale stamping automation equipment with one function. The overall structure of the model is

Automatic Sheet Metal Decoiler In Machinary Decoiler Machine For Steel Coil Manual or pneumatic models can be selected for inner diameter adjustment,There is wide selection to choose from depending on width and weight of coil. Main Features: 1) Suitable for all kinds of coil material feeding. 2) It can work together with straightener. Buyer can also choose non motive power style. 3) Maximum material width is 1300mm specifications: Model Stock Width (mm) Coil Weight (kg) Motor

Motorized Press Feeding Line Uncoiler Sheet Metal Decoiler Machine Manual or pneumatic models can be selected for inner diameter adjustment,There is wide selection to choose from depending on width and weight of coil. Main Features: 1. Manual type of spindle expansion 2. Motorized Operation, with standard speed 16m/min 3. Application: Unwinding coil 4. Suitable for most kind of coil material, such as CR Steel, HR Steel, Galvanized steel, Stainless steel, Pre-painted, Aluminum