Metal Sheet Straightening Machine

Heavy-duty material rack is the most used material for unloading and unwinding in stamping automation production. It has the advantages of economical price, simple operation, low failure rate and high degree of automation. It is the first choice for discharging equipment in automatic punching production. The models of heavy-duty material racks are divided according to the maximum width of the

500mm width sheet metal coil uncoiling straightening machine feeder used for punch press Specification: Model MAC2-400 MAC2-500 MAC2-600 MAC2-800 Stock Width(mm) 50-400 50-500 50-600 50-800 Stock Thickness(mm) 0.3~3.2 0.3-3.2 0.3-3.2 -3.2 Max.Coil Weight(kg) 3000 3000 3000 5000 5000 7000 Max.Coil O.D.(mm) 1200 1200 1200 Coil I.D.(mm) 8 8 508 508 Feed Length(mm) ~500* ~500* ~500* ~500* Max. Line Speed(m/min) 16-24 16-24 16-24 16-24 Work Roll Number(pieces) upper 6 lower 5

NC feeder coil feeding, feeder feeding accuracy, punching metal coil processing (MAC3-400) http://www.ruihui.net The traditional NC feeder only has a lower roller at the inlet, and when the coil enters the inside of the body of the feeder through the inlet, the jumping problem is likely to occur during the process of the coil entering the body, which seriously affects the feeding stability. And precision. Moreover, the feeding thickness of the coil entering the feeder through

Causes and solutions for inaccurate feeding of air feeder: 1. The speed is too fast and the feeding is not allowed. Solution: Turn the air feeder speed adjustment screw clockwise to lower the feed rate. 2. If the step setting is incorrect, the feeding will be inaccurate. Solution: Adjust the feed length fine adjustment screw and speed adjustment screw, and reset it. After designing, be sure to re

Feeders commonly used in the market, whether air feeders, roller feeders, NC feeders, gear feeders or high-speed clip feeders, are continuous feeders designed for sheet metal. That is usually used on coils, the entire stamping automated production line consists of unwinding device (material rack), leveling device (leveling machine), feeding device (feeder), punching machine and continuous die,

Heavy-duty material racks are advantageous because of their affordable price, wide application range (all kinds of stamping production lines and shearing lines can be used), and high degree of customization (volume inner diameter, outer diameter, and coil weight can be customized). It has become the most used material discharging and unwinding equipment in the stamping industry. At present, most of

1.NC servo feeder: This is a punching machine with the highest degree of automation, the widest range of use, the best feeding accuracy and the easiest operation. It can feed the air feeder up to 10m. The wide material and thick material that can not be transported by the roller feeder can be input on the touch screen by the setting of the feed step, speed and frequency. However, since the electronic control system.

Although the air feeder is the earliest feeding device, its operation, use and maintenance skills are quite high, and the frequency of faults is high. If there is no long-term experience, it will often affect the actual effect of stamping and production and overall production efficiency due to frequent failures. There is a clear understanding of the causes and solutions of common faults in air feeders, so

Space saving automatic Metal Sheet Straightening Machine using for press machine Specification: Model MAC2-400 MAC2-500 MAC2-600 MAC2-800 Stock Width(mm) 50-400 50-500 50-600 50-800 Stock Thickness(mm) 0.3~3.2 0.3-3.2 0.3-3.2 -3.2 Max.Coil Weight(kg) 3000 3000 3000 5000 5000 7000 Max.Coil O.D.(mm) 1200 1200 1200 Coil I.D.(mm) 8 8 508 508 Feed Length(mm) ~500* ~500* ~500* ~500* Max. Line Speed(m/min) 16-24 16-24 16-24 16-24 Work Roll Number(pieces) upper 6 lower 5 upper 6

NEW Metal Sheet Straightening Machine Use in Household Appliances Manufacturers Specification: Model MAC2-400 MAC2-500 MAC2-600 MAC2-800 Stock Width(mm) 50-400 50-500 50-600 50-800 Stock Thickness(mm) 0.3~3.2 0.3-3.2 0.3-3.2 -3.2 Max.Coil Weight(kg) 3000 3000 3000 5000 5000 7000 Max.Coil O.D.(mm) 1200 1200 1200 Coil I.D.(mm) 8 8 508 508 Feed Length(mm) ~500* ~500* ~500* ~500* Max. Line Speed(m/min) 16-24 16-24 16-24 16-24 Work Roll Number(pieces) upper 6 lower 5 upper 6 lower

This is a compact feeding line, with decoiler, straightener and feeder machine in one combination unit. It used to uncoiling metal strip from coil stock, straightening it to required flatness and feed it to press machine for stamping process. Thanks to a well-knit body and advanced mechanical structure, it can easily handle coil stock up to 10tons. With YASKAWA servo drive, YASKAWA servo motor and

CNC Feeding Machine Stamping Precision, Guangdong Ruihui Stamping Equipment, Vacuum discharge machine www.ruihui.net CNC feeder is an effective way to solve the stamping efficiency of low-speed mechanical presses. However, in our country in recent decades, there are still a large number of mechanical and even manual feeding, and the numerical control of presses is still relatively small, but in the rapid press CNC Today, the system still needs to improve productivity by

Welcome OEM & ODM 3 in 1 NC straightener machine of MAC1 series Production: MAC1 handles material up to 300~800mm width and 3.0mm thickness. This is the standard compact, high-performance straightener feeder system, and this model has been a best seller since it was put into the market. It can be use in press line to help to make electronic products. Specification: Model MAC1-300 MAC1-400 MAC1-500 MAC1-600 MAC1-800 Stock Width(mm) 50~300 50~400 50~500 50~600 50~800 Stock

Electronic Parts Processing Stamping, Nc Servo Feeder, Automatic Stamping, pin making machine, tube notcherwww.ruihui.netThe feeder, as the name suggests, transports materials, which is an indispensable peripheral equipment for light industry and heavy industry automatic stamping production.Left and right yaw servo feeder NC-200 model featuresThe NC left and right yaw servo feeder can save more than 1/2 of the material, shorten the feeding time, input the operating program on

High-Speed Punch Feeder Stamping Process, Hard Alloy Stamping, optics instruments, wire rope press machine www.ruihui.net Feeder, roller feeder and CNC feeder are the three most commonly used feeding equipments in the stamping industry. The width, thickness and stamping process of the materials are different, but their application range is the same. It is widely regarded by customers as the most in the industry. Three kinds of feeding equipment are commonly used. It is the

High-Speed Precision Punch Feeder, Steel Knot Hard Alloy Processing, gold refining equipment www.ruihui.net High-speed precision punching machine is a tool for mass production. Various metal plates, such as copper plates, iron plates, aluminum plates, etc., can be continuously punched out on high-speed precision punching machines as long as they are first made into a set of molds and are more and more valued and utilized by the market. . It has the characteristics of fast

Automatic Punch Feeder Equipment, Aluminum Alloy Parts Processing, Punch Feeder, pcb etching machinewww.ruihui.netIndustrial development is one of the important economic chains in China. Whether it is heavy industry or light industry, high-tech machinery and equipment are needed to enter, so that work efficiency can be improved, more human resources can be liberated, and the utilization rate of material resources can be improved.And those traditional equipments need to be

Thin Roll Stamping Die, Disc Horizontal Feeder, Automatic Punching Machine, aluminum machine, slitting linewww.ruihui.netDisc horizontal feeder machine features: horizontal plane loading, friction structure, inverter speed control method.Therefore, the machine has the advantages of convenient operation, firm structure, overlapping stacking of materials, adjustable speed, fast feeding speed and saving refueling time, especially in combination with the use of high-speed

High-Speed Roller Feeder Feeding Shaft, Guangdong Coil Stamping Processing, Automatic feeding machine manufacturerwww.ruihui.netThe principle of the high-speed roller feeder is to feed the feed by the output shaft of the punch. Therefore, the puncher must be equipped with a roller feeder. The puncher must have a drive shaft. The high-speed roller feeder eccentric disk mount is fixed on the drive shaft. The eccentric disk rotates to drive the pull rod. The pull rod is

NC servo feeder performance is stable _ Ruihui high-precision nc servo feeder _ you can rest assured The NC servo feeder has stable performance and extremely low failure rate. It is only the best stamping equipment. In actual use, the occurrence of faults is still inevitable. The NC servo feeder is no exception. The most common fault is the unstable transmission distance. In the event of such a failure, timely targeted treatment is required to prevent the loss of stamping