Preformed Helical Fittings

Function and Purpose The clamp is a kind of conductor clamp with strong tensility and sample structure. Therefore, it can replace the bolt type, compression type and wedege type dead end clamp used an present. Product Characteristic Conductor is finely protected because stress is equally distributed in large touching area without intensive stress pivot. The grip is more than 95% RTS of conductor. Selected the materials of clamp with good quality to against corrosion. Simple

Function and Purpose s are intended to reduce electrical stress at the ends of the metal rods of dead ends and suspensions applied on ADSS cables installed in high voltage Electrical fields. They are made from a light weight material and are designed to suppress electrical arcing at the ends of metal rods wich can occur on some lines and May damage the plastic jacket of ADSS cables. Select matching type According to the diameter of ADSS One unit is required at

Function and Purpose The side tie (LPL/C,F,J,K) is applied on the clamping of the CA/CAA conductor cable on the “neck” of the pin insulator. Made from galvanized steel wires or aluminum clad galvanized steel (identified by the “RA” letters after the main code), from copper clad galvanized steel (identified by the “RC” letters after the main code) or also from copper alloy (identified by the number 3 as the first digit). An abrasive material applied on its inner side improves

Function and Purpose The clamp is used on supports to suspend conductor. Product Characteristic Double suspension clamp can be used for long distance transmission lines across rivers and supports with big tuning angles Good resistance to vibration performance. The clamp has a slip load of more than 20% RTS of cable. It protects the safe operation of cable in the unbalanced loads condition for a period time. The materials of rod selected good quality aluminum alloy wire are

Function and Purpose Repair sleeve can repair the damaged conductor to recover its original strength and conductivity. Product Characteristic The materials of splice rod selected good quality Al-alloy. It has excellent mechanical performance and against corrosion performance. Simple structure is convenient for installation. Manual operation on the spot without any requirement of the special tools. Notice Repair sleeve can be adopted for repair when less than 7% of strands are

Function and Purpose The clamp is mainly applied to fix the guy wires of the various types of poles or towers. It can replace the wedge clamp and U-T clamp used at present. Product Characteristic Guy wire is finely protected because stress is equally distributed in large touching area without intensive stress pivot. The grip is more than 95% RTS of guy wire. The materials of clamp selected good quality materials to against corrosion. Simple structure is convenient for