Protective PET Film

Pet insulation film / Opal semi permeable PET film , Electric machinery film Characteristic 1. Excellent mechanical properties 2. Good electrical insulation performance 3. Good heat resistance, applied to class B (130 ° C) insulation system 4. It has excellent machinability. Specifications: Properties Unit Test Values Testing Standard Single Layer Thickness Average Thickness μm 25-100 ASTM D882 Tensile Strength MD MPa 170 TD 200 Elongation at Break MD % 110 TD 110 F5 value MD

Foggy PET Films For Composite Applications/Insulation/Sound film/Pack/Print Specifications: Thickness Width Length Paper Core 38mic-188mic 100-1500mm 100-6000mm 76mm (3 inches) 152mm (6 inches) characteristic: Fog transparency,Haze uniformity,thermostability High efficiency: due to the requirement of high temperature resistance, all kinds of molding products, such as sound film, dust cap, printer scraper, etc., the temperature should reach 180 degrees, which improves the

Stable High Temperature / Fog Resistance , S10 High Fog Inner Surface Corona Treated Film Product introduction 1. Adopt excellent raw materials and composite industry standards 2. The product is clean and free of impurities and holes 3. High temperature resistance, corrosion resistance, good weather resistance, not easy to aging Specifications: Physical characteristics Unit Test Values Testing Standard Thickness µm 50 ASTM D 374 Fracture strength MD N/mm³ 190 JIS C 2151 TD

Product Description: PET film with anti-static coating ,we called Antistatic PET film,OR ESD PET film, one or double side primer coating, great antistatic function and difficult to decay, excellent flatness, good thermal endurance, nice surface quality Specifications: PROPERTY UNIT SCS11/12 SCS21/22 SCS31/32 TEST METHOD TEST VALUE THICKNESS µm 50 75 GB/T 13542.4-2009 TENSILE STRENGTH MD MPa 220 200

Product Description: This product is widely used in viscose products, electronic industry, waterproof industry, composite materials, self-adhesive labels, printing and packaging, food packaging, aluminium plating, wire and cable, insulation and other industries. Physical properties: Properties Unit Test Values Single Layer Thickness Average Thickness μm 99.3 Tensile Strength MD MPa 220 TD

PET film on the surface of printing light box , transparent and foggy s10bopet film​ Product introduction S10 polyester film is nontoxic and tasteless, with high tensile strength, good stiffness, burn crack resistance, not easy to be damaged, excellent electrical and optical properties, good oxygen and humidity resistance, cold resistance (- 70 ℃), heat resistance (+ 200 ℃), corrosion resistance and stable shrinkage. Specifications: Product specification Thickness μm 12~150

Environmental protection transparent PET film , waterproof color antistatic pet roll Product Description: 1. High tear strength transparent adhesive polyester film 2. Anti static coating can be applied 3. High definition, good chemical resistance and wear resistance 4. Ideal for PCB manufacturing and testing Specifications: Properties Unit Test Values Testing Standard Single Layer Thickness Average Thickness μm 50 Tensile Strength MD MPa 205 GB/T 13542.2-2009 TD 205

Food packaging Foggy shopwindow film , S10 Foggy PET film thickness 0.188-0.35mm Product Description: PET film is a kind of packaging film with various functions. It has good transparency and luster, good air tightness and fragrance retention, medium moisture resistance and low moisture permeability. The mechanical properties of PET film are excellent, its strength and toughness are better than that of all thermoplastics, and its tensile strength and impact strength are much

High temperature and low temperature resistant S10 foggy polyester film Product Description: S10 has a melting point of 262-263 ℃ (504-506 ° f) and a temperature range of - 70 ℃ - 150 ℃ (from - 95 ° f to 302 ° f) and can withstand a high temperature of 180 ℃ (355 ° f) for a short time. It does not contain any flexibility agent (the substance can turn other films into sharp objects), so it has a long-term insulation ability and a strong adaptability to the climate. Specificati

Fireproof and foggy s10Mylar polyester film , customized processing Product introduction S10 PET film is also called S10 fog PET film, BOPET fog film, fog polyester film, s10pet film is widely used in electronics, electrical appliances, power transmission and transformation equipment, packaging materials. Specifications: Properties Unit Test Values Testing Standard Single Layer Thickness Average Thickness μm 11.5 Tensile Strength MD MPa 271 ASTM D 882 TD 215 Elongation at

Anti scratch s10 bopet film , PET film for mobile phone screen protection Product introduction The film can protect the screen from scratch, slight impact and daily use, has strong adhesion, is easy to remove, does not leave any residue, edge to edge bending fit, easy to carry - will not hinder the use with any type of box, fingerprint sensor will not be affected after using the screen protector Specifications: Properties Unit Test Values Testing Standard Single Layer

High temperature resistant double-sided antistatic film coil , thickness 0.1mm Product Description: It is suitable for plastic lens, glass, film and display screen, circuit board, etc. The product has outstanding transparency, hardness, scratch resistance, flatness, high temperature resistance, ultraviolet resistance, exhaust performance; the defect is poor tensile property, poor bending function, poor adaptability to temperature change. Specifications: PROPERTY UNIT SCS11/12

Wholesale PET Films For Electronic Iabels / Thermostability / Low shrink Specifications: Thickness Width Length Paper Core 38mic-188mic 100-1500mm 100-6000mm 76mm (3 inches) 152mm (6 inches) Characteristic: Thermostability, Low shrink ,Low transparency 1. Environmental protection, non-toxic, tasteless, benzene free, no solvent in production, harmless to the environment, no toxic gases or volatile substances in use 2. The properties of the fog are stable and have the

Manufacturer Of PET Film For Electronic Iabel Fog/Low transparency Specifications: Thickness Width Length Paper Core 38mic-188mic 100-1500mm 100-6000mm 76mm (3 inches) 152mm (6 inches) Characteristic: Fog transparency,Thermostability ,Low shrink ,Low transparency 1. Environmental protection, non-toxic, tasteless, benzene free, no solvent in production, harmless to the environment, no toxic gases or volatile substances in use 2. The properties of the fog are stable and have

High Temperature Foggy PET Film/Fog transparency/Thermostability Specifications: Thickness Width Length Paper Core 38mic-188mic 100-1500mm 100-6000mm 76mm (3 inches) 152mm (6 inches) Characteristic: Fog transparency,Thermostability ,Low shrink ,Low transparency High efficiency: due to the requirement of high temperature resistance, all kinds of molding products, such as sound film, dust cap, printer scraper, etc., the temperature should reach 180 degrees, which improves the

S10 Foggy PET Film Manufacturer/Haze uniformity/Production order Specifications: Thickness Width Length Paper Core 38mic-188mic 100-1500mm 100-6000mm 76mm (3 inches) 152mm (6 inches) Characteristic: Fog transparency,Haze uniformity,low shrink , Low transparency,Production order 1. Environmental protection, non-toxic, tasteless, benzene free, no solvent in production, harmless to the environment, no toxic gases or volatile substances in use 2. The properties of the fog are

0.05mm Foggy PET Films For Electronic Iabels/thermostability /low shrink Specifications: Thickness Width Length Paper Core 38mic-188mic 100-1500mm 100-6000mm 76mm (3 inches) 152mm (6 inches) characteristic: Fog transparency,thermostability ,low shrink 1. Environmental protection, non-toxic, tasteless, benzene free, no solvent in production, harmless to the environment, no toxic gases or volatile substances in use 2. The properties of the fog are stable and have the characteri

Foggy PET Film For Insulation/Fog transparency/Haze uniformity/thermostability Specifications: Thickness Width Length Paper Core 38mic-188mic 100-1500mm 100-6000mm 76mm (3 inches) 152mm (6 inches) Characteristic: Fog transparency,Haze uniformity,thermostability ,Low transparency The properties of the fog are stable and have the characteristics of 150 degrees of temperature resistance.. High efficiency: due to the requirement of high temperature resistance, all kinds of

S10 Low Transparent PET Film / Fog transparency / Haze uniformity Specifications: Thickness Width Length Paper Core 38mic-188mic 100-1500mm 100-6000mm 76mm (3 inches) 152mm (6 inches) Characteristic: Fog transparency , Haze uniformity , Low transparency High efficiency: due to the requirement of high temperature resistance, all kinds of molding products, such as sound film, dust cap, printer scraper, etc., the temperature should reach 180 degrees, which improves the

Foggy Transparent PET Film For Packaging/Fog transparency/Haze uniformity Specifications: Thickness Width Length Paper Core 38mic-188mic 100-1500mm 100-6000mm 76mm (3 inches) 152mm (6 inches) characteristic: Fog transparency,Haze uniformity,Low transparency 1. The properties of the fog are stable and have the characteristics of 150 degrees of temperature resistance.. 2. High efficiency: due to the requirement of high temperature resistance, all kinds of molding products, such