Fire Testing Equipment

IEC60332.1.2 Electric And Optical Fibre Cables Vertical Flame Propagation 1kw Pre-Mixed Flame Test Machine Product overview: The mica board combustion tester is a test method for testing the flame resistance characteristics of the mica board combustible substrate surface under specified conditions, and it is also suitable for the mica board flame resistance time Determination. Meet the standards: Meet the requirements of IEC60332-12 standard. Main parameters: Temperature

ISO 5658-2 Spread Flame Test Machine Fire Flammability Resistance Testing Equipment Laboratory Description: It’s suitable to evaluate burning characteristics of construction materials and measure the spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characteristics of vertical specimen.After recording time of ignition and extinguishment at each distance,we can calculate the flame spread

Flammability of Vinyl Plastic Film Testing Machine for CFR 16 Part 1611 Application: SPI Flammability Tester, to determine the ignition properties of vinyl plastic film material according to CFR 16 Part 1611 - U.S.A. Flammable Fabrics Act for flammability of apparel vinyl plastic film. This product is manufactured according to Flammable Fabric Acts (FFA), which is a mandatory testing terms proposed by U.S. Consumer Product Safety Commission (CPSC). This tester is used to

Flammability of Vinyl Plastic Film Testing Machine for CFR 16 Part 1611 Feature: l Stainless steel test cabinet, equipped with transparent viewing window; l 22# needle flame, flame length adjustable; l Inching-controlled mode switch; l Record burning time and burning rate automatically; l Timer accuracy up to 0.01 second; l Provide with a stainless steel specimen holders Application: SPI Flammability Tester, to determine the ignition properties of vinyl plastic film material

IEC61730 Large-Scale Photovoltaic ModuleCell Flammability Tester Application: It is mainly applicable to test methods to determine whether building materials have flammability under specified conditions. Standard: - IEC61730 Technical parameters: Serial number Parts Parameters 1 Intake fan and intake guide device Introduce outdoor air, adjustable fins to avoid air turbulence. The inlet fan can be controlled remotely. 2 Anemometer At least 3 anemometers, the wind speed reaches

IEC61730 Large-Scale Photovoltaic ModuleCell Flammability Tester Application: It is mainly applicable to test methods to determine whether building materials have flammability under specified conditions. Standard: - IEC61730 Technical parameters: Serial number Parts Parameters 1 Intake fan and intake guide device Introduce outdoor air, adjustable fins to avoid air turbulence. The inlet fan can be controlled remotely. 2 Anemometer At least 3 anemometers, the wind speed reaches

AS1530.2 Flammability of MaterialsTest Apparatus 1.Introduction Building Material Radiant Panel Tester is designed according to AS/NZS1530.3; The device heat samples via a gas radiant plate and calibrate with a heat flow meter. Test sample is placed in a vertical position, near the radiation plate, exposed in a clear area calibrated radiation flux. Close to the pilot flame is assembled with the test sample, but not in contact with the test sample. After ignition, it can

AS1530.2 Flammability of MaterialsTest Apparatus 1.Introduction The apparatus is designed base on the standard AS1530.2, test for flammabilityof materials. The method is applies to the testing of thin sheet or woven material which is sufficiently pliable to be inserted into the test apparatus by hand without special softening treatment, so that it may be graded according to a flammability index. 2.Standard AS1530.2 Test for flammability of materials. 3. Appratus 1. Two

ISO11925-2 Flame Single-Flame Source Testing Equipment Small Box Burner Application: It is mainly applicable to test methods to determine whether building materials have flammability under specified conditions. Standard: EN ISO 11925-2 DIN 4102 Technical parameters: Inner dimensions of the combustion chamber 700 x 400 x 810mm Material mirror stainless steel Open area 25 * 25mm, height: 50mm Burner burner by the aperture of ¢0.17 mm of nozzle and regulating valve, and is

IEC / EN 60332-1-2 Vertical Fire Testing Equipment , Flame Propagation Test For A Single Insulated Cable Scope of application: Applicable to the flame retardation test of a single wire or cable or fiber cable under the specified flame conditions. At the same time, it can be used to test the burning of drip objects under flame conditions. Standards: In line with GB/T18380.11-2008, GB/T18380.12-2008, GB/T18380.13-2008, IEC60332-1-1:2004, IEC60332-1-2:2004, IEC60332-1-3: 2004

Thermal Insulation Rock Wool , Slag Wool And Its Products Test Machine GB/T11835 Product Description: Product overview: Suitable for rock wool, slag wool, glass wool and products, not for aluminum silicate wool and its products. Under a fixed load, the sample is heated at a certain heating rate to achieve the specified thickness shrinkage rate. The thermal load shrinkage temperature is calculated by interpolation and calculated. Standard: GB/T11835 Model: DX8359 Technical

Electrical strength test machine for solid insulating materials Summary: The electrical dielectric strength tester is suitable for testing the breakdown strength and withstand voltage of dielectric, such as plastic, film, resin, mica, ceramic, glass, insulating paint and other media at power frequency voltage. Standards: GB/T5169.10,GB/T5169.13-2006 IEC60695-2-10:Fire hazard testing- Part2-10: Glowing/hot wire testing Machine- Glow-wire apparatus and common test procedure

AC Contactor Life Testing Equipment IEC60947-4-1 Use of equipment: The equipment is used to test the action characteristics of AC contactors and detect the overrun, synchronization error, total stroke, current and voltage of AC contactors. Standards: - IEC60947-4-1-2000 - IEC60947-1-1999 Technical parameters: 1. Can conduct electrical life test on single-phase ac contactor contacts; 2. 5 station work at the same time, at the same time in the same load according to the set

IEC60947-4-1 AC Contactor Life Test Device Application: The equipment is used to test the action characteristics of AC contactors and detect the overrun, synchronization error, total stroke, current and voltage of AC contactors. Standards: - IEC60947-4-1-2000 - IEC60947-1-1999 Technical parameters: 1. Can conduct electrical life test on single-phase ac contactor contacts; 2. 5 station work at the same time, at the same time in the same load according to the set sequence, set

ISO 9151 Protective Clothing Heat Transmission Tester BS EN 367 Product Description: Heat transfer index is calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of 25±5℃. The heat transfer index provides a method of grading materials which does not imply that the material tested will give any precise protective time under actual use conditions. Application: Safety

IEC 60811-504:2012 Mandrel Test Apparatus & Impact Test Apparatus 1. Remark: The electric low-temperature winding test device is suitable for evaluating and measuring the performance of round cables or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After a specified cooling time, the

IEC 60811-504:2012 Mandrel Test Apparatus & Impact Test Apparatus 1. Remark: The electric low-temperature winding test device is suitable for evaluating and measuring the performance of round cables or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After a specified cooling time, the

NFX -70-100-1&2 Material Smoke Toxicity Test Device (squirrel cage method) Application: It is designed according to the technical indicators and requirements stipulated in the national standard GB/T20285-2006 "Material Smoke Toxicity Dangerous Classification", which is mainly applicable to the test equipment for the smoke toxicity hazard of materials with stable smoke production. Equipment Performance Index: Power supply voltage AC220V±10% 50HZ current ≤10A; Maximum use power

ISO9185 Protective Clothing- Resistance Of Materials To Molten Metal Splash Testing Equipment Application: Evaluate the material's resistance to liquid metal splashes During the test, an appropriate amount of molten metal is sputtered onto the sample placed at an angle. Attach a PVC film to the back of the sample to make contact with it. The damage was evaluated by recording the changes in the PVC film after the sputtering process. According to the test results, repeat the

600°F Flame- Retardant Protective Clothing Testing Equipment GB 8965.1.2009 Scope of application: This equipment is used to measure the thermal insulation performance of materials used in protective clothing when exposed to hot surfaces up to 600 ° F (316 ° C) for a short period of time. This method is applicable to materials used in protective clothing structures, including but not limited to: woven fabrics, knitted fabrics, laths, sheet structures, and material composites,