Plastic Testing Equipment

Product Description: Plastic Testing Equipment is a high voltage test equipment used for testing electrical insulation materials, which can track errosion test machine with a voltage range of 100V~8000V and five groups of voltage (220V,50HZ). It is 1300L*700W*1800H (mm) in size, and is widely used in the research and development of insulating materials. With this plastic testing equipment, it is easy to test the electrical insulation performance of plastic products, and

Track And Erosion Resistance Tester IEC60587 Track And Erosion Resistance Tester IEC60587 scope: The high voltage leakage marking tester is applicable to the test of electrical and electronic products, household appliances and their materials for resistance to electric tracing and erosion. It simulates that under the power frequency (48Hz - 62Hz), the resistance to electric tracing and erosion of electrical insulation materials used under severe environmental conditions is

IEC 60243 ASTM D149 Voltage Breakdown Tester, Solid Isulation Material Withstand Voltage Testing Machine Application Apply to continuous uniform boosting or step by step boosting way, step by step toward a sample breakdown, ac/dc voltage until the breakdown voltage measurement, calculation of the sample breakdown strength. Definitions: Breakdown Voltage: Sample under a certain voltage is punctured, at this time of voltage named breakdown voltage, expressed as a kV. Voltage

Siver Plastic Testing Equipment HDT Vicat Tester for ASTM D 648 Heat Deflection Temperature Test Standard: Accord with ASTM-D648 JIS-K7191 ISO-2507 GB/T 8802 test standard requirements. Scope of application: Mainly applicable to the determination of plastic test pieces, thermal deformation HDT... Three-point loading under the bending stress deformation temperature and plastic Vicat softening temperature test method ... plastic samples under the specified conditions, the

IEC 60068 PLC Touch Screen Salt Spray Corrosion Test Chamber Product Description: Through the examination of the material and its ability to salt spray corrosion protective layer, and a protective layer similar process quality compared to the same time assess the ability of certain product resistance to salt spray corrosion; this product is suitable for parts and components, electronic element, protective layer, and salt spray corrosion testing of industrial products, metal

ASTM C411-82 Thermal Insulation the Maximum Service Temperature Testing Equipment Description: The test method refers primarily to high-temperature insulations that applicable to hot-side temperatures in excess of 66℃. It is used for materials such as preformed insulations, insulating cements, blankets, and the like, by proper laboratory preparation of the samples. Standards: ASTM C411-82:Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

IEC60587-2007 6 KV Automatic High Voltage Tracking Index Tester Technical Description: This product is used in electrical products under the influence of moisture and impurity environment, between the different polarity of the live parts or between the live parts and the grounding metal parts may cause insulation on the leakage, the resulting arc caused by electrical breakdown of the electrical or due to Discharge causes the material to erode and even ignite the fire. The

Tensile Strength Material Elongation Testing Machine for Plastic Products Max. load 500 - 5000kg Unit exchange kg,N, LB Accuracy of load ± 0.5% of indicated value Load resolution 1/10,000 Max. tensile space 1100mm (mot including fixture) Valid test width 400mm Test speed 0.5-500mm/min keyboard input to control Speed control system Knob Data sampling 80r/s Motor Servo motor Weight 150kg Fixture A pair of tensile fixture or other fixture one pair made to order Standard

IEC60587 6 KV Electrical Insulating Materials - Resistance to Tracking and Erosion Testing Equipment Technical Description: This 6 KV Electrical Insulating Materials Tracking and Erosion Testing Equipment is used in electrical products under the influence of moisture and impurity environment, between the different polarity of the live parts or between the live parts and the grounding metal parts may cause insulation on the leakage, the resulting arc caused by electrical

Plastic Testing Equipment IEC60587 1, Summary The invention belongs to the technical field of tempered glass detection equipment, in particular to a tempered glass hammering detection device and a tempered glass hammering detection method, The second end of the pull rod extends above the photoelectric sensor, the hammer is fixed on the second end of the pull rod, one end of the support spring is fixedly connected with the pull rod, and the other end of the support spring is

DX8388 Solid insulation material electrical strength testing machine (electrical dielectric strength tester) Compliant with standards: Complies with the requirements of GB1408.1, IEC60243-1 "Test Methods for Electrical Strength of Solid Insulation Materials - Tests at Power Frequency", GB1408.2, IEC60243-2 "Test Methods for Electrical Strength of Solid Insulation Materials - Corresponding DC Voltage Test" GB/T1695-2005 "Determination of Power Frequency Breakdown Voltage

DX8425 Plastic Load Deformation Testing Machine ⅠScope of Application: Mainly applicable to hard plastics connected by rivets, bolts or similar connection methods, to determine their ability to withstand compression without yielding or loosening over time; Suitable for non rigid plastics, determine their ability to return to their original size over time after deformation. Ⅱ Technical Parameter: 1. Loading form: Apply a constant load of 113kg, 227kg, and 454kg ± 1% to the two

IEC 60587 Electrical Insulating Materials Resistance To Tracking And Erosion Test Machine IEC60587 ASTMD2303 Electrical Tracking Mechanism Technical Description: The mechanism of electrical impingement on the epoxy resin insulating material using a high voltage of 3.5 kV AC with a frequency of 50 Hz causes the surface of the epoxy resin insulating material to burn. Five groups of samples are powered on for six hours. When the sample is burned out, the equipment will give an

IEC60587-2007 6 KV Automatic High Voltage Tracking Index Test Machine Technical Description: This product is used in electrical products under the influence of moisture and impurity environment, between the different polarity of the live parts or between the live parts and the grounding metal parts may cause insulation on the leakage, the resulting arc caused by electrical breakdown of the electrical or due to Discharge causes the material to erode and even ignite the fire.

DX8413 Arc resistance testing machine Standards: As per IEC 61621, ASTMD495. Scope of application: The assessment of arc resistance performance of electrical insulation materials such as plastics, resin adhesives, and insulating paints used in industries such as motors, appliances, and household appliances is mainly applicable to the testing of arc resistance performance of solid insulation materials such as plastics, films, resins, mica, ceramics, glass, insulating oil,

100KV IEC 60243-1 Power Frequencies Electrical Strength Testing Equipment Application: This tester is suitable for measuring the breakdown strength and withstand voltage time of solid insulating materials such as plastic, film, resin, mica, ceramics, silica gel, glass, insulating paint, etc. in air or liquid medium, it can measure the breakdown strength and withstand voltage time under power frequency (48 ~ 62Hz) or corresponding DC voltage. Standards: IEC60243-1 IEC60243-2

48Hz-62Hz Power Frequency High Voltage Tracking Index Flammability Test Machine For Electrical Insulation Iec60598-2007 Technical Description: The high-voltage leakage tracking tester is suitable for conducting electric tracking and erosion resistance tests on electrical and electronic products, household appliances and their materials. It is simulated at the power frequency (48Hz-62Hz) with liquid pollutants and inclined samples. The measurement of resistance to electrical

IEC60529-2001 The Sand and Dust Chamber for IP5x and IP6x Tests 2kg/m3 IP5X and IP6X The Sand and Dust Chamber IEC60529-2001 Remark: It is suitable for testing whether electrical products, shells and seals can ensure the good performance of equipment and components in a dusty environment, and can realistically simulate various environments with more dust. The dust falls vertically up to the bottom non-laminar flow on the sample, and the dust is concentrated to the vortex gas

IEC60529-2001 The Sand and Dust Chamber for IP5x and IP6x Tests 2kg/m3 IP5X and IP6X The Sand and Dust Chamber IEC60529-2001 Product Description: Sand and Dust Testing Chamber is designed for sealing performance test and reliability test, widely used in electrical, electronics, automobile, motorcycle, LED and other products. It is suitable for the work ability test on the shell sealing performance, product in dust free settlement, in the environment without apparent air flow

IEC 60112 Wire Cable Tracking Index Test Machine CTI for Insulating Materials Product Description: Pti / CTI Wire Cable Tracking Index Test Machine is used for the determination of comparative tracking indices of solid electrical insulating materials on pieces taken from parts of electrical and electronic equipment and on plaques of material using alternating voltages.In normal use, components made of insulating material may become moist and dirty.If the impurities are