Fire Testing Equipment

1.The steel structure fire retardant coating sample test furnace is suitable for the fire resistance test of all kinds of steel structure fire retardant coating small samples used inside and outside the building, and is not suitable for the sample with a length greater than 800cm. With WINDOWS 7 operating interface and development software LabView, the interface style is fresh, beautiful and simple. During the test, the measurement results are displayed in real time and the

EN13823 Single Element Combustion Fire Resistance Testing Equipment for Construction Materials Single Burning Item SBI Test Fire Testing Equipment Single Burning Item tester EN 13823 Scope of application: The method used to determine the fire response performance of building materials or products (excluding floor covering materials and the products identified in EC Decision No. 2000/147/EC) in the Monomer Burning Test (SBI). Standard: 2.18- 3.18 EN13823 "single burning test

UL790 Roof Covering Combustion Performance Fire Resistance Testing Machine Introduction: The photovoltaic cell module combustion tester UL790 is an instrument that simulates real conditions to evaluate the fire resistance of roofs and modules. It evaluates the sample's grade AC under the conditions of A1.82m, B 2.4m and C 3.9m. Standards: ASTM E 108 Fire Tests for Roof Covering Materials; UL790 roof covering material fire test; NFPA 256 roof covering fire test; IEC 61730-2

ASTM E648-19 Fire Testing Equipment Floor Covering Critical Radiant Flux Test Machine Scope of application: - Suitable for testing with a small flame igniting a floor covering material that is placed horizontally and exposed to an inclined thermal radiation field. - Suitable for all kinds of flooring materials. Such as: textile carpets, cork, wood plastic flooring and floor spraying materials. The device may reflect the burning properties of the flooring material including

ISO 1182 Fire Testing Equipment For Products-Non- Combustibility Application: When a certain amount of gas is supplied to the box and the standard ignition source is used to ignite the flame, this instrument can be used to test the ability of the vertical flame propagation to be restrained under the standard conditions of the vertically installed bundles of wire, cable or optical fiber cable. Standards: - BS 476-4 - EN IS01182 - GB/T 5464 - ASTM E136[3] Main parameters: The

Radiation Penetration Resistance Of Protective Materials Tester Product Description: The instrument is mainly used for testing the radiation resistance of protective materials against radiation heat penetration. The device is mainly composed of a radiant heat source, a fixed thermal insulation device, a mobile thermal insulation device, a sample fixing and supporting device, a temperature sensing device, a control device, a display device and accessories, etc. It has the

ISO 17492 Clothing For Protection Against Heat And Flame- Heat Transmission On Exposure NFPA 1971 Application: TPP thermal protection performance meter is mainly used to test the thermal insulation performance of flame retardant protective clothing fabrics exposed to radiant heat sources and convection heat sources. Standard: ISO 17492:Technical Corrigendum 1-2004 NFPA 1971:Standard on Protective Ensemble for Structural Fire Fighting Product Details: - The heat source of

ISO 17492 TPP Thermal Protection Performance Tester NFPA 1971 Application: TPP thermal protection performance meter is mainly used to test the thermal insulation performance of flame retardant protective clothing fabrics exposed to radiant heat sources and convection heat sources. Standard: GB 8965.1-2009,GA 10-2002,GA 634-2006, NFPA 1971:Standard on Protective Ensemble for Structural Fire Fighting ISO 17492:Technical Corrigendum 1-2004 Product Details: - The heat source of

ISO 9151 Protective Clothing Heat Transmission Tester BS EN 367 Product Description: Heat transfer index is calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of 25±5℃. The heat transfer index provides a method of grading materials which does not imply that the material tested will give any precise protective time under actual use conditions. Application: Safety

ISO 5659 NBS Plastic Smoke Density Tester ,Smoke Density Testing Chamber Product Description: The plastic flammability smoke density meter is a new type of measurement smoke density developed according to the technical conditions stipulated in the standard GB/8323.2-2008 and ISO 5659-2 "Test methods for the determination of smoke density using the single chamber method for the production of plastic cigarettes". The test equipment is suitable for determining the specific

YY 0469-2011Mask Fame Retardant Tester Scope of application: The mask flame retardant tester is used to test the combustion performance of medical masks after contacting the flame at a certain linear velocity. It is a special test instrument for the flame retardance of medical masks. It is a test item to detect the flame retardancy of protective masks. Combustion power source. The system is equipped with a metal head mold. The mask is brought into the metal head mold. The

ASTMF2100-19 Mask Fame Retardant Tester Scope of application: The mask flame retardant tester is used to test the combustion performance of medical masks after contacting the flame at a certain linear velocity. It is a special test instrument for the flame retardance of medical masks. It is a test item to detect the flame retardancy of protective masks. Combustion power source. The system is equipped with a metal head mold. The mask is brought into the metal head mold. The

Portable Fire Extinguisher Impact Test Machine Meet the standards: GB/T 4351.1-2005 ISO 7165 Scope of application: Mainly suitable for vibration test of portable fire extinguisher with 1kg~8kg. Test method: After dry powder fire extinguishers weighing, placed in 20 ºC ± 5 ºC constant greenhouse environment keep out after 18 h or more time, will be a fire extinguisher in upright position and fixed on the instrument, the height of 15 mm at a 1 hz frequency to the horizontal

GB/T11835-2016 Rock Wool, Slag Wool and Its Products for Thermal Insulation Testing Machine Product Description: Applicable to rock wool, slag wool, glass wool and products, not to aluminum silicate wool and its products. Under a fixed load, the sample is heated at a certain temperature increase rate to reach a predetermined thickness shrinkage rate. The thermal load shrinkage temperature is obtained by interpolation by calculation. Features: Using a single-chip computer,

BS476-6 Fire propagation Tests on Building materials and structures Model: DX8298 Meet the standards: BS476-6 GB / T 17658-1999: Fire Test of Fire Retardant Wood "Fire Test Method" Scope of application: Determination of the fire test performance of products used as internal linings in buildings. BS 476-6: Fire performance of wall and ceiling products is assessed by flame propagation index size.A thermocouple was used to continuously record the difference between the

Portable Fire Extinguisher Impact Test Machine Model: DX9027 Meet the standards: ISO 7165,GB/T 4351.1-2005 Scope of application: Mainly suitable for vibration test of portable fire extinguisher with 1kg~8kg. Test method: After dry powder fire extinguishers weighing, placed in 20 ºC ± 5 ºC constant greenhouse environment keep out after 18 h or more time, will be a fire extinguisher in upright position and fixed on the instrument, the height of 15 mm at a 1 hz frequency to the

GB/T11835-2016 Rock wool,slag wool and its products for thermal insulation Testing Equipment Product Description: Product overview: Suitable for rock wool, slag wool, glass wool and products, not for aluminum silicate wool and its products. Under a fixed load, the sample is heated at a certain heating rate to achieve the specified thickness shrinkage rate. The thermal load shrinkage temperature is calculated by interpolation and calculated. Standard: GB/T11835 Model: DX8359

GB/T11835 Rock wool,slag wool and its products for thermal insulation Testing Equipment Product Description: Product overview: Suitable for rock wool, slag wool, glass wool and products, not for aluminum silicate wool and its products. Under a fixed load, the sample is heated at a certain heating rate to achieve the specified thickness shrinkage rate. The thermal load shrinkage temperature is calculated by interpolation and calculated. Standard: GB/T11835 Model: DX8359

50KV Electrical Strength Test Machine for Solid Insulating Materials Summary: The electrical dielectric strength tester is suitable for testing the breakdown strength and withstand voltage of dielectric, such as plastic, film, resin, mica, ceramic, glass, insulating paint and other media at power frequency voltage. Standards: IEC60243-1:Test method for electrical strength of solid insulating materials -- test under power frequencytest standards. GB1408.1:Electrical dielectric

ISO 9151 Protective Clothing Heat Transmission Tester BS EN 367 Product Description: Heat transfer index is calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of 25±5℃. The heat transfer index provides a method of grading materials which does not imply that the material tested will give any precise protective time under actual use conditions. Application: Safety