Flammability Testing Equipment

Product Introduction: Radiant panel flame spread tester is used to test the flammability of building surface materials (ASTM E162) and foam plastics (ASTM D3675) by using gas thermal radiant panel. The flame spread index (IS) is determined by factors such as flame spread and heat dissipation. It is a necessary parameter in many industry standards, especially for public transportation (trains and buses). Data collection and analysis are automatically completed by software.

Scope of application: Mainly suitable for testing the propane combustion performance of flame retardant conveyor belts with whole core fabrics used in coal mines. According to MT914-2008 "Whole core flame retardant conveyor belts for coal mine fabrics", the combustion performance of propane in tunnels is tested. Adopting a strong exhaust system, the exhaust fan system is activated to purify the exhaust gas through water curtain activated carbon and discharge it, meeting

Meets the requirements of the flame retardant performance testing standards for safety helmets in GB/T 2812-2006 "Test Methods for Safety Helmets" and GB/T 2811-2007 "Safety Helmets". Mainly used for testing the flame retardant performance of safety helmets, widely used in safety helmet production enterprises, major quality inspection units, and construction engineering testing stations. Test method: The flame retardant performance tester for safety helmets should be tested

ASTM F2700-08 TPP Test Device , Clothing Flame Resistant Materials Test Equipment 1.TPP Test Device Product introduction: The TPP Thermal Protective Performance tester is used to measure the insulation performance of flame-resistant protective clothing fabrics exposed to radiant heat sources and convective heat sources. It is used to test the thermal protection performance of protective clothing, safety shoes, gloves, helmets and other outer surfaces. By using the TPP Thermal

Vertical Combustion Chamber , Wire Cable Flammability Testing Equipment for UL1581 Compliance with the standard: Strictly according to UL1581 sect 1080.1 ~ 1080.14 standard production, and approved by Guangzhou Meihua UL company, in line with VW-1 (V-ertical-specimen) Flame Test burning test standards. It applies to VW-1 of UL1581.UL13.UL444.UL1655 and FT-1, FT-2 test standard requirements of CSA. It is economical and widely used by the wire and cable industry. Test method:

Polymeric Materials High Voltage Tracking Index Leakage Current Plastic Test Machine IEC60587 Technical Description: This product is used in electrical products under the influence of moisture and impurity environment, between the different polarity of the live parts or between the live parts and the grounding metal parts may cause insulation on the leakage, the resulting arc caused by electrical breakdown of the electrical or due to Discharge causes the material to erode and

IEC60587 6 KV Automatic High Voltage Tracking Index Tester Technical Description: High Voltage tracking tester suit for electronic products, household appliances and other materials resistance to tracking and erosion test, simulate the frequency (48HZ-62HZ) or a corresponding DC Voltage, liquid contaminants and ramps samples by electrical resistance to tracking and erosion measurements assessed under severe environmental conditions of electrical insulating materials

Flammability Testing Equipment Flame travel and smoke of wires and cables testing equipment NFPA262 Introduction: The UL910/NFPA262 steiner tunnel furnace shall prescribe the methodology to measure flame travel distance and optical density of smoke for insulated, jacketed,or both,electrical wires and cables and optical fiber cables that are to be installed in plenums and other spaces used to transport environmental air without being enclosed in raceways. Standards: UL910:

EN14619-2015 Scooter Endurance Testing Equipment Introduction: EN14619-2015 standard machine is to simulate the scooter under a certain load according to a certain speed to a certain mileage, to check the bottom wheel of the scooter and car body and other components of the performance of the impact. Each parameter can be input and set, easy to operate, convenient to use, safe, stable and durable. Technical parameters: Roller diameter Φ 700, 0.5 m long Number of impact blocks

DIN7520 Automotive Interior Materials Burning Chamber FMVSS571.302 ISO 3795 Interior Materials Burning Behaviour Testing Equipment DIN7520 Introduction: Determining the horizontal burning rate of materials used in the occupant compartment of road vehicles(for example,passenger cars,lorries or trucks, eatate cars,coaches),and of tractors and machinery for agriculture and forestry, after exposure to a small flame. Technical parameters: Box size 385*204*360mm Size parameters of

DIN7520 Automotive Interior Materials Burning Chamber FMVSS571.302 Basic introduction: Suitable for the assessment of combustion characteristics of automotive interior materials, suitable for automotive interior materials, such as: automotive sunscreen film, automotive handgrip cover, automotive floor mat, automotive non-slip pad, cushion, and other automotive interior products. Performance characteristics : The control box and combustion box are made of stainless steel,

Flammability Cable Halogen Acid Gas Release Rate Testing Machine Introduction: Halogen Acid Gas Tube Furnace is used to test the acidity of the gas that released during combustion from cable or optical cable components material. The equipment is designed and produced on the basis of GB/T 17650 and IEC 60754. The cable material is processed by prius tube furnace, and then the pH value and conductivity of the gas that generated in combustion process are measured,so that the

EN ISO 1182 Non Combustibility Testing Equipment for Building Materials Products: Non-Combustibility Apparatus for Building Material is designed and manfacture according to ISO 1182 international standards. Furnace temperature can quickly reach temperature equilibrium into the test program; temperature curve can print free. Standards: ISO 1182: building products --- incombustible fire reaction test test BS 476-4 & 11 ASTM E 136 Main Features: 1, Intelligent test system with

GB 1094.11-2007 Dry Type Transformers Flammability Test Equipment Testing Machine Lab Test Testing Machine Standard: GB 1094.11-2007. Power dry-type transformer combustion performance testing device combustion testing machine 1,Purpose: Used for measuring the combustion performance test of dry-type transformers in accordance with GB 1094.11-2007 "Dry type Transformers" for Class F1 dry-type transformers. 2,Functional requirements: The function meets the requirements of the 28

ASTM D2565 Xenon-arc Exposure of Plastics Intended for Outdoor Applications Test Chamber ASTMG155-05a Application: It is suitable for plastic, rubber, paint, paint, ink, paper, medicine, food, cosmetics, textiles, auto parts, packaging materials, building materials, electrical and electrical products, etc.; it provides corresponding environmental simulation and accelerated test for scientific research, product development and quality control, and provides important test basis

Product Overview: 1. BS 476-6 is a test method for measuring the flame propagation characteristics of materials, mainly used to evaluate the fire resistance performance of walls and ceilings, and provides test results. As an indicator of flame propagation. 2. During the experiment, the sample was exposed to a tubular torch with a heat release of 530 J/S. During the experiment, the sample was exposed to a tubular torch with a heat release of 530 J/S. After 5 minutes of testing

Cables as per EN50399 Test Machine Fire Testing Technology Product Description: Flammability Testing Equipment is a reliable, advanced and accurate fire testing equipment designed to test the flammability of materials. It is a lab fire testing equipment with Material Smoke Density and Material Somke Toxicity display. It helps to measure the Heat Release and Smoke Production of materials accurately and quickly. It is equipped with a Radiant Heat Energy Source which is

IEC60332-3 Bunched Cable Vertical Flame Spread Testing Machine - Flammability Testing Equipment IEC60332-3 Product Description: Daxian's Flammability Testing Equipment is an essential tool for any lab fire testing, allowing users to perform accurate and reliable flame tests. This device is equipped with a display material smoke density and material smoke toxicity, and the overall weight is 200KG. It is also designed with several different types of fire testing equipment,

IEC60332-3 Durable Flammability Testing Equipment - Bunched Cable Vertical Flame Spread Testing Machine IEC60332-3 Product Description: Daxian's flammability testing equipment is a comprehensive lab test apparatus designed to simulate various types of fire and test the flame resistance of materials and products. It is used to determine the flammability of materials and products in accordance with national standards, and is widely used in electronics, electrical appliances,

Bunched Cable Vertical Flame Spread Testing Equipment Product Description: Daxian's Flammability Testing Equipment is designed to help customers accurately assess the flammability of a wide range of materials and products according to IEC 60332-3 Standard. This equipment is capable of measuring the heat release and smoke production of vertically-mounted bunched wires or cables, making it a useful tool for fire testing technology. The delivery time of this product is 10-15