Rock Splitting Hammer

Steel forged geological chisel hammer DOWSER BRAND hammer is our new R&D geological hammer, it is made of 50# steel (carbon steel) , and head and shaft are forged integrated, well polished. Compare to traditional hammer, our product design is more humanized. Feature: 1. Body: Qualitative 5Quenching hardness RC50-55, Quenching depth 0.8-1.2mm. Tensile strength (MPa):≥630(64) Yield strength (MPa):≥375(38) Elongtation δ5 (%):≥14 2. Grip: textured slip resistant TPRmaterial.

Steel forged geological chisel hammer Geological hammer is one of the basic tools for geological work. it is made of high quality steel or wooden handle with steel head. One end of the geological hammer head is rectangular or square, and the other end is pointed prismatic or flat wedge - shaped. When in use, one end of the square head is usually used to knock the rock to break it into pieces. One end of a sharp edge or a flat wedge is struck along the layer of the rock layer,

Steel forged geological chisel hammer DOWSER BRAND hammer is our new R&D geological hammer, it is made of 50# steel (carbon steel) , and head and shaft are forged integrated, well polished. Compare to traditional hammer, our product design is more humanized.The flat nozzle effectively controls the splitting direction of the rock to avoid knocking the sample into fragments. It is especially suitable for soft or split rocks ( shale and slate ), and rock samples can be easily

Steel forged geological chisel hammer DOWSER BRAND hammer is our new R&D geological hammer, it is made of 50# steel (carbon steel) , and head and shaft are forged integrated, well polished. Compare to traditional hammer, our product design is more humanized. 1. Body: Qualitative 5Quenching hardness RC50-55, Quenching depth 0.8-1.2mm. Tensile strength (MPa):≥630(64) Yield strength (MPa):≥375(38) Elongtation δ5 (%):≥14 2. Grip: textured slip resistant TPR material. Dampens the

Steel forged geological chisel hammer ● special steel ● integral casting technology ● grip damping technology ● ergonomic design ● center of gravity balancing system ● force gathering groove design 1. Body: Qualitative 5Quenching hardness RC50-55, Quenching depth 0.8-1.2mm. Tensile strength (MPa):≥630(64) Yield strength (MPa):≥375(38) Elongtation δ5 (%):≥14 2. Grip: textured slip resistant TPRmaterial. Dampens the impacttransmitted through to the user’s hand and wrist.

Steel forged geological chisel hammer DOWSER BRAND hammer is our new R&D geological hammer, it is made of 50# steel (carbon steel) , and head and shaft are forged integrated, well polished. Compare to traditional hammer, our product design is more humanized. Body: Qualitative 5Quenching hardness RC50-55, Quenching depth 0.8-1.2mm. Tensile strength (MPa):≥630(64) Yield strength (MPa):≥375(38) Elongtation δ5 (%):≥14 .Grip: textured slip resistant TPRmaterial. Dampens the

Steel forged geological chisel hammer DOWSER BRAND hammer is our new R&D geological hammer, it is made of 50# steel (carbon steel) , and head and shaft are forged integrated, well polished. Compare to traditional hammer, our product design is more humanized. Geological hammer is one of the basic tools for geological work. it is made of high quality steel or wooden handle with steel head. One end of the geological hammer head is rectangular or square, and the other end is

Steel forged geological chisel hammer Geological hammer is one of the basic tools for geological work. it is made of high quality steel or wooden handle with steel head. One end of the geological hammer head is rectangular or square, and the other end is pointed prismatic or flat wedge - shaped. When in use, one end of the square head is usually used to knock the rock to break it into pieces. One end of a sharp edge or a flat wedge is struck along the layer of the rock layer,

Steel forged geological chisel hammer DOWSER BRAND hammer is our new R&D geological hammer, it is made of 50# steel (carbon steel) , and head and shaft are forged integrated, well polished. Compare to traditional hammer, our product design is more humanized.The flat nozzle effectively controls the splitting direction of the rock to avoid knocking the sample into fragments. It is especially suitable for soft or split rocks ( shale and slate ), and rock samples can be easily

Steel forged geological chisel hammer DOWSER BRAND hammer is our new R&D geological hammer, it is made of 50# steel (carbon steel) , and head and shaft are forged integrated, well polished. Compare to traditional hammer, our product design is more humanized. The flat nozzle effectively controls the splitting direction of the rock to avoid knocking the sample into fragments. It is especially suitable for soft or split rocks ( shale and slate ), and rock samples can be easily

Steel forged geological chisel hammer ● special steel ● integral casting technology ● grip damping technology ● ergonomic design ● center of gravity balancing system ● force gathering groove design 1. Body: Qualitative 5Quenching hardness RC50-55, Quenching depth 0.8-1.2mm. Tensile strength (MPa):≥630(64) Yield strength (MPa):≥375(38) Elongtation δ5 (%):≥14 2. Grip: textured slip resistant TPRmaterial. Dampens the impacttransmitted through to the user’s hand and wrist.

Steel forged geological chisel hammer DOWSER BRAND hammer is our new R&D geological hammer, it is made of 50# steel (carbon steel) , and head and shaft are forged integrated, well polished. Compare to traditional hammer, our product design is more humanized. We introduced new technologies and continuously tried new materials, greatly improving the gripping experience of its original striking tools such as hammers and axes. Part of the material of the handle not only well

Steel forged geological chisel hammer DOWSER BRAND hammer is our new R&D geological hammer, it is made of 50# steel (carbon steel) , and head and shaft are forged integrated, well polished. Compare to traditional hammer, our product design is more humanized.The flat nozzle effectively controls the splitting direction of the rock to avoid knocking the sample into fragments. It is especially suitable for soft or split rocks ( shale and slate ), and rock samples can be easily

Steel forged geological chisel hammer The flat nozzle effectively controls the splitting direction of the rock to avoid knocking the sample into fragments. It is especially suitable for soft or split rocks ( shale and slate ), and rock samples can be easily taken by layering.DOWSER BRAND hammer is our new R&D geological hammer, it is made of 50# steel (carbon steel) , and head and shaft are forged integrated, well polished. Compare to traditional hammer, our product design is

Steel forged geological chisel hammer We introduced new technologies and continuously tried new materials, greatly improving the gripping experience of its original striking tools such as hammers and axes. Part of the material of the handle not only well absorbs the impact of frequent and strong blows to the hand, but also reduces the disturbing shock. Moreover, the material performance is excellent, and the durability is far better than that of ordinary rubber and plastic

DOWSER BRAND hammer is our new R&D geological hammer, it is made of 50# steel (carbon steel) , and head and shaft are forged integrated, well polished. Compare to traditional hammer, our product design is more humanized. Body: Qualitative 5Quenching hardness RC50-55, Quenching depth 0.8-1.2mm. Tensile strength (MPa):≥630(64) Yield strength (MPa):≥375(38) Elongtation δ5 (%):≥14 .Grip: textured slip resistant TPRmaterial. Dampens the impacttransmitted through to the user’s hand