Alloy Steel Seamless Pipes

What's the 25CrMo4 , 1.7218 , AISI 4130 Use for construction Steel Trade Name :25CrMo4 , 1.7218 , AISI 4130 Name : Alloy Boiler Structural steel Grade : 20HM , 25HM , AISI4130 , SAE 4130 AND 25CRMO4Usage : thermal improvement and high temperature operation acc to PN-89/H84030/04 , EN10083-3, EN10269 , PH-75/H-84024 PN 25HM , Chemical Composition % C:Mn:SiPSCrNiMoVNbTiPN 25HM 0.220.290.400.700.170.37

What's the15CDV6 , 14CrMoV6-9 , Alloy Steel Trade Name :Alloy Steel Standard : 15CDV6 , 14CrMoV6-9 , 1.7734 , 1.7735 , 1.8521 Alloy Steel 15CDV6 specification and Standard , Alloy Steel 15CDV6 Chemical Composition ,Alloy Steel 15CDV6 , SEW Alloy Steel 15CDV6 Mechanical Properties? Alloy Steel 15CDV6 manufacturer Alloy Steel 15CDV6 Chemical Composition : Standards Steel Grade Chemical composition % C: Mn: Si: P: S: Cr: Mo: V: Ni: Cu: 15CDV6 - 15 CDV 6 - E15CDV6 - E 15 CDV 6

What is the bolier Steel P250GH Trade Name : p250gh , 1.0460 , cc2.8 Carbon Steel p250gh specification and Standard , Carbon Steel p250gh Chemical Composition , Carbon Steel p250ghequivalent, Carbon Steel p250gh Mechanical Properties? Carbon Steel p250gh manufacturer P250GH , C22.8 , 1.0460 Bolier Steel low-alloy boiler Steel bards for operation at elevted temperatures for pressure equipments acc to EN20173 , DIN17243 EN P250GH , Chemical Composition % C: Mn: Si P S Cr Ni Mo

Product Name : Steel pipe make the world go round Although not alway noticed, they are everywhere: pipes. Steel pipe is used in many varied constructions: football stadiums, cilinders, roller-coasters, ships, buildings, cranes, cars, etc. Van Leeuwen Buizen is an international supplier of steel pipe, hollow sections, fittings, flanges and valves - all quality products made by respected manufacturers and suppliers. Each product has a wide range of applications The company is

Practical for the production of machine parts with required surface layer with high hardness and ductile core, such as gears, screws, shafts, sleeves, large size – parts to be very high pressures and loads. Technical specifications: PN EN Werkstoff nr AISI 16HG 16MnCr5 1.7131 5115 15HN 17CrNi6-6 1.5918 17HNM 18CrNiMo7-6 1.6587 4820 18GHT 20HG 20MnCr5 1.7147 5120 18H2N2 19CrNi8 1.2722 Name : WB36 (T36/P36, 15NiCuMoNb5-6-4) HOT ROLLED TUBES FOR HIGH TEMPERATURE AND PRESSURE

Name : EN X10Ni9/ X8Ni9 Low temperature Nickel Steel alloy steel seamless pipes for pressure purpose and low temp You are looking for EN X10Ni9/ X8Ni9 Low temperature Nickel Steel alloy steel seamless boiler pipes with different specifications? We can also supply these with the relevant certificates. Alloy steel pipe Standard & Material: GB5310-2013 Standard: 20G,25MnG, 15MoG,15CrMoG, 20MoG, 12CrMoG, 12Cr2MoG,12Cr1MoVG, 12Cr2MoWVTiB, 10Cr9Mo1VNb, 15CrMoG, 10CrMo910, ASTM

Steel 16Mo3 (UNE ) and its European equivalent 16Mo3 (1.5415) ( EN ) The 16Mo3 steel elbow is a high-quality fitting designed for enduring performance in various applications, particularly those involving high temperatures and pressures. This specific elbow is galvanized, enhancing its resistance to corrosion and extending its lifespan significantly. The 90-degree angle of the elbow makes it an essential component for directing flow in piping systems, allowing for efficient

Cylinder tubes Seamless and welded precision tubes for hydraulic and pneumatic applications (HP-, HPZ-, HPK-, HPS-Tubes) Cold forming increases the stability level of steel. Therefore the wall thickness can be reduced in comparision to the same steel type of hot rolled pipes combined with a significant weight reduction of the component can be achieved · Scope of application HP-Tubes Cylinder tubes for hydraulic and pneumatic applications HPZ-Tubes Manufacture of cylinder

Grade : S355J0H Number: 1.0547 Classification: Non-alloy structural steel Standard: EN 10210-1: 2006 Hot finished structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements EN 10219-1: 2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements Chemical composition % of steel S355J0H (1.0547): EN 10210-1-2006 Method of deoxidation FN = rimming steels not permitted CEV < 0.45 / 0.53

Grade : S275J2H Number: 1.0138 Classification: Non-alloy structural steel Standard: EN 10210-1: 2006 Hot finished structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements EN 10219-1: 2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements Chemical composition % of steel S275J2H (1.0138): EN 10210-1-2006 Method of deoxidation FF = fully killed steel C < 0.2 for thickness =< 40

Grade : S275J0H Number: 1.0149 Classification: Non-alloy structural steel Standard: EN 10210-1: 2006 Hot finished structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements EN 10219-1: 2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements Chemical composition % of steel S275J0H (1.0149): EN 10210-1-2006 Method of deoxidation FN = rimming steels not permitted C < 0.2 for

Tubes for construction EN 10210 Hot formed hollow sections of non-alloyed steel Welded circular, square and elliptical hollow sections Seamless tubes circular and square Scope of application Steel construction, engineering, vehicle construction, agricultural machinery and plant construction Manufacturing process - Seamless - Welded with additional normalization or hot stretched reduced Material number and qualities - unalloyed steel EN 1.0039 S 235 JRH 1.0149 S 275 JOH 1.0138

Grade : X2CrNiMoCuN25-6-3 Number: 1.4507 Classification: Austenitic-ferritic stainless steel - special grade Density: 7.8 g/cm ³ Standard: EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes EN 10028

Grade :X2CrNiN23-4Number:1.4362Classification:Austenitic-ferritic stainless steelDensity:7.8 g/cm ³Standard:EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposesEN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposesEN 10028-7: 2007 Flat products made of

Grade :X2CrNiMoSi18-5-3Number:1.4424Classification:Austenitic-ferritic stainless steel - special gradeDensity:7.8 g/cm ³Standard:EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposesEN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposesEN 10216-5: 2014

Grade : X8CrNiNb16-13 Number: 1.4961 Classification: Austenitic creep resisting steel Density: 7.9 g/cm ³ Standard: EN 10302: 2008 Creep resisting steels, nickel and cobalt alloys EN 10028-7: 2007 Flat products made of steels for pressure purposes. Stainless steels EN 10216-5: 2014 Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes EN 10088-1: 2005 Stainless steels. List of stainless steels Chemical composition % of steel

Product Name Seamless Steel Pipe Standard GB AISI ASTM DIN EN JIS Thickness 0.5-60mm or as required Outer Diameter 6mm- 1200mm or as required Surface Electro-galvanizing, hot-dip galvanizing, black or as required Length 1m-12m or as required Material 10MoWVNb, 15MnV, 09Mn2V,20# /45#/ Q195/Q235/Q345/S235/S275/S355/SS400 etc Shape Round.Square.Rectangle Technique Hot rolled or Cold rolled Package Standard sea-worthy packing Payment Term Ex-work, FOB, CFR, CIF, or as Requirement

Steel Grade: P195GH Steel Number: 1.0348 Chemical composition (cast analysis)a, in % by mass C, % Si, % Mn, % P, % S, % Cr, % Ni, % Cu, % Mo, % Nb, % Ti, % V, % 0.13 max 0.35 max 0.70 max 0.025 max 0.020 max 0.30 max 0.30 max 0.30 max 0.08 max 0.01 max 0.04 max 0.02 max Quality guarantee (1)Chemical analysis (2)Tensile test(Tensile test at room temperature, Tensile test at elevated temperature) (3)Flattening test (4)Ring tensile test (5)Drift expanding test (6)Ring expanding

En 10216-3 Grade P275nl1 P275NL2 P215nl P265nl Seamless Steel Pipes 1.0451 Steel Pipes P275NL steel tube Specification OD: φ4-410 mm Wall thickness: 1-35 mm . EN 10216-3 Grade P275NL1 Specification EN Specification alloy steel Tubes are used for high temperature service applications.Seamless Alloy Steel Tubes according to EN 10216-3 Grade P275NL1 are reheated and furnished in full annlealed,isothermal annealed or normalised quenched and tempered condition .EN 10216-3 Grade

P235GH SCHEDULE 40 STANDARD STEEL PIPE FITTINGS SCH80 1.0345 ELBOW TEE CS REDUCING TEE Grade : P235GH Number: 1.0345 Classification: Non-alloy quality steel Density: 7.85 g/cm ³ Standard: EN 10028-2: 2009 Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties EN 10216-2: 2014 Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified elevated