Cast Steel Gate Valve

AISI 316 L Forged Steel Gate Valve / Eco Friendly Os Y Gate Valve 2500lbs GASWWF WLD CL800 CS 13CR DN20 S/ W WEDGE TYPE WELDED BONNET GATE VALVES DESIGN SPEC : ISO 15761 SERVICE : STEAM TYPE OF WEDGE : SOLID PRESSURE DESIGNATION, ASME CL : 800 FUGITIVE EMISSIONTIGHTNESS CL : C TYPE OF STEM : OUTSIDE SCREW TYPE OF BONNET :WELDED TYPE OF BORE : REDUCED SPEC TREATM, BODY SEAT FACING : STELLITE 6 FACINGS SPECTREATM, WEDGE SEAT FACING : STELLITE 6 FACINGS MAT, BODY : CARBON STEEL

Multifunctional Cast Steel Gate Valve API 600 , API 6 D , ANSI , ASME Standard Cast Steel Gate Valve introduction: Cast Steel Gate Valve are available in three bonnet designs. The first design is the Bolted, with male-female joint, spiral wound gasket, made in F304L/graphite.Ring joint gasket are also available on request. The second design is the welded bonnet, with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The third

Copper Body Through Conduit Gate Valve , Oil Gate Valve 175psi Pressure Through Conduit Gate Valve Description: Brief introduction: The series of gate valves include cast steel gate valve and forged steel gate valve. They are designed and manufactured according to ANSI B16.34. With solid wedge and flexible wedge, so it can be used for different pressures. Gate valves have back seal. Back seal of forged-steel gate valve is weld with stainless steel. So it has perfect sealing.

Forged Cast Steel Gate Valve With Rising Stem API 600 , API 6 D , ANSI , ASME Cast Steel Gate Valve introduction: 800# , S.W. , GATE VALVE, PLAIN SOLID WEDGE, O.S. & Y. , API TRIM n°8 (STELLITED SEATS) , ASTM A193 Gr. B7 / ASTM A194 Gr. 2H , SPIRAL WOUND S.S. 316L / GRAPHITE , GRAPHITE PACKING , Cast Steel Gate Valve Technical Specification * Two piece self-aligning packing gland * Bolted bonnet with spiral wound gasket, threaded and seal welded bonnet or threaded and

Flexible Wedge Cast Iron Gate Valve , Full Port Cast Steel Globe Valve Cast Iron Gate Valve Brief introduction: The series of gate valves include cast steel gate valve and forged steel gate valve. They are designed and manufactured according to ANSI B16.34. With solid wedge and flexible wedge, so it can be used for different pressures. Gate valves have back seal. Back seal of forged-steel gate valve is weld with stainless steel. So it has perfect sealing. Its maintenance is

Anti Corrosion Through Conduit Slab Gate Valve Pneumatic Operated Water Supply Through Conduit Slab Gate Valve Specifications: NO Part name Material 1 Body Ductile cast iron 2 Wedge Ductile cast iron + EPDM 3 Stem nut ZCuAl10Fe3 Gunmetal 4 Gasket EPDM 5 Bonnet Ductile cast iron 6 Gland gasket ZCuAl10Fe3 Gunmetal 7 Stem 2Cr13 S.S.x 20Cr13 8 Gland Ductile cast iron 9 Rubber wiper EPDM/NBR 10 Hand wheel Ductile cast iron Water Supply Gate Valve FEATURES ⊙ Shot-blasting

A216 WCB Double Eccentric Wafer Type S960 DN100(4") Handwheel Gear Operated HP Double Eccentric Wafer Type S960 DN100(4") FTF Length (mm) 44mm Body: A216 WCB Disc: CF8 Seat :Metal (SS316L) + Graphite Torque (Incl. 25% safety factor) (N.M.) 300N/m Handwheel Gear operated Brief introduction: The butterfly valve is operated by the disc rotating form 0° to 90°, can be applied to cut off or regulate the flow of medium. The valve can be actuator by operating lever, handle wheel

Bolted bonnet gate valves, Extension to Floor Level, Pressure seal gate valves A. C/W Extension Stem Gate Valve Floor Pedestal and actuator with indicator, incorporating offset utilising 2*45 degree knuckles B.C/W Extension Stem Gate Valve Floor Pedestal and gearbox with indicator. C.C/W Extension Stem Gate Valve Handwheel with deck stuffingbox, incorporating offset utilising 2*45 degree knuckles D.C/W Extension Stem Gate Valve Floor pedestal and handwheel, incorporating

1/2' Cast Steel Gate Valve , Three Bonnet Forged Steel Gate Valve Brief introduction: Forged steel gate valves are available in three bonnet designs. The first design is the Bolted, with male-female joint, spiral wound gasket,made in F304L/graphite.Ring joint gasket are also available on request. The second design is the welded bonnet, with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The third design is the pressure seal

Flanged Cast Steel Gate Valve 6 Inch 150 PSI Wheel Handle Operating Type - Standard dimension according to DIN 3202 - end flanges according to DIN 2501 item DN (mm) PN ( bar) facing Face to face (mm) Material / or equivalent Body material Trim material 1 50 25 RF 250 A 351 GRADE CF8C 13%CR TYPE 410 2 50 100 RF 250 A 216 - WCB 13%CR TYPE 410 3 80 64 RF 310 A 216 - WCB 13%CR TYPE 410 4 100 40 RF 350 A 217 C5 13%CR TYPE 410 5 100 40 RF 350 A 216 - WCB 13%CR TYPE 410 6 150 25 RF

Steel taper-seat valve with cartridge spindle, DN 800, PN 64 Purpose: water flow control Valve type: taper-seat valve Location: in the enclosed area Ambient air temperature: +5 C … +50 C Fire area classification: II Explosive mixture category: Д Humidity: 29-84% Liquid environment: water DN: 800 PN: 6.4 MPa Sealing classification: A Actuator Type: electric SA16.2 AC 01.2 (Profibus) Maker: AUMA Voltage: 380 V Frequency: 50 Hz Nominal power: 5 kW Synchronal motor (actuator)

Knife Gate Valve With Electric Actuator Without Positioning But With Overtravel-Limit Switch For End Positions Operation site climate conditions: from -40°C to +40°С, outdoors, without tent Body material: rust-proof heat-proof steel AISI SUS316 Seal material : metal-metal Stem seal material : gland, Graflex Use for medium: sulfuric anhydride, sulfurous anhydride (gas),with solids contents. Toxic medium. Operaition type : With electric actuator , interface 380 V (three phases)

Gate Valve 150# ANSI Raised Face Flange end Cast Steel body, Rising Stem, OS&Y, Bolted Bonnet Gate Valve: 150# ANSI Raised Face, Flange end Cast Steel body, Rising Stem, OS&Y, Bolted bonnet, Manufactured to API 600 Standard WCB, RF, CLASS 150LBS ASTM A105 & ASTM A216 GR TRIM: 316SS SEAT: SATELLITE SOLID WEDGE, BOLTED BONNET RISING STEM TO API 6D, OS&Y , NACE MR0175 BODY MATERIAL: A216 GR WCB (CS) TYPE: GEAR OPERATED SIZES IN INCHES: 26" CONFIGURATION: DESIGN RATING: 150 LBS

PN10 125lbs DN50 - DN2000 Knife Cast Steel Gate Valve JB/T8691-1998 Specification PN(MPa) strength test(MPa) seal test(MPa) Temperature Medium 1 1.5 1.1 ≤100℃ sewage,gray,pulp etc., 1.6 2.4 1.8 ≤100℃ Material body /bonnet Wedge Stem Seat SST, carbon steel, ductile iron carbon steel. SST SST rubber.PTFE,SST,Alloy Dimenision MPa DN L D D1 D2 H N-M D0 Weight(Kg) 1 50 43 160 125 100 285 4-M16 180 8 65 46 180 145 120 298 4-M16 180 10 80 46 195 160 135 315 4-M16 220 12 100 52 215

Valve, Knife Gate Tech, SS316, 8”, H/W (Valve Knife Gate Technical, ANSI 150, Seat EPDM) Design & manufacture standard: API6D,API600,API603,ISO10434 Face to face dimensions: ANSI/ASME B16.10 Flange connection: ANSI/ASME B16.5 for NPS24,ASME B16.47A/MSS SP-44 for NPS>24. Butt-welding end dimensions: ANSI/ASME B16.25 Socket-welding dimensions: ANSI/ASME B16.11 Inspection & test standard: API6D,API598. Pressure: 150Lb,300Lb,600Lb,900Lb 1500lb 2500lb etc. Nominal diameters: CAST:

Threaded Hreaded Wedge Type Screwed Bonnet Gate Valves BS 5154 Series B Standard GATE VALVE, COPPER ALLOY (BRONZE/BRASS), SIZE: 1/2", 1000 PSIWOG (wATER, OIL OR GAS) 300 PSI SATURATED STEAM, SCREWED ENDS (API FEMALE), UNION BONNET, COP DESIGN RATING: 1000 PSI WOG (WATER, OIL OR GAS), 300 PSI SATURATED STEAM BODY MATERIAL: COPPER ALLOY (BRONZE / BRASS) SIZE: 1/2" CONNECTION: SCREWED ENDS (API FEMALE) STYLE: UNION BONNET TRIM MATERIAL: COPPER ALLOY (BRONZE / BRASS) OPERATION:

High Pressure Cast Steel Gate Valve With Butt Welding End ANSI/ASME B16.25 Design & manufacture standard: API6D,API600,API603,ISO10434 Face to face dimensions: ANSI/ASME B16.10 Flange connection: ANSI/ASME B16.5 for NPS24,ASME B16.47A/MSS SP-44 for NPS>24. Butt-welding end dimensions: ANSI/ASME B16.25 Socket-welding dimensions: ANSI/ASME B16.11 Inspection & test standard: API6D,API598. Pressure: 150Lb,300Lb,600Lb,900Lb 1500lb 2500lb etc. Nominal diameters: CAST: 2"~ 60"

Large Diameter Resilient metal seated gate valve As DIN F4 and AS2129 Resilient Seated Gate Valves, sizes 30” thru 48”, NRS and OS&Y with manual gear operators Specifications: FEATURES ⊙ Shot-blasting protective surface finished by shot-blasting and the surface is smooth and neatness. ⊙ Flatting seat Smooth continuous bore way without seating recess, it is not easy to get impurity pilled up. ⊙ Treating with rubber Both inner and outer are coated with advanced knowledge of

Resilient Seated Gate Valve FEATURES ⊙ Treating with rubber Both inner and outer are coated with advanced knowledge of rubber vulcanization then making sure of the elasticity of rubber ,and make sure the exact geometry dimension. Rubber and ductile cast iron valve hand together hardly. This can avoid fall-off due to long-term use. ⊙ Anti- corrosion Both inner and outer are coated with non-toxic powder epoxy resin to strengthen the capacity of Corrosion resisting and raise the

Electric Resilient Wedge Gate Valve / Flanged Water Supply Gate Valve Resilient Wedge Gate Valve APPLICABLE STANDARDS ⊙ British Standard 1.Design to BS5163,BS5150 2.Face to face dimension to BS5163(ISO 3series,ISO19 series) 3.Flange and drilling To BS4504 part1(EN1092) ⊙ Germany Standard 1.Design to DIN3352 2.Face to face dimension to DIN3202(F4:ISO 14 series;F5: ISO 15 series) 3.Flange and drilling to BS EN1092 Resilient Wedge Gate Valve Applications This valve widely