Surge Protection Device

12.5kA New Class B+C Lightning surge protector Three Phase IEC Standards SPD 12.5kA New Class B+C Lightning surge protector Main Characteristic: • Three phases type 1+2 surge suppressor for TT and TN-S system protection.• Class B+C surge protection devices offer solution with combined performance over 8/20 µs and 10/350 µs waveform to withstand against lightning and switching surges.• Double thermal disconnection device, providing higher protection. 12.5kA New Class B+C

600V Surge Protection Device PV Surge Arrester SPD Surge Protective Device 2P 600V Surge Protection Device PV Surge Arrester Description: • DC Surge protection device to protect your PV installation. • When the SPD fails in breakdown for over heat or over-current, the failure release will help electric equipment separate from the power supply system and give the indication signal • Rated voltage: 600 V DC. • Safety super wide electrical spacing and creepage distance, high

New Class B+C 12.5KA Surge Protection Whole House Lightning Absorber New Class B+C 12.5KA Surge Protection Characteristic: - New Iimp 12.5kA surge arrester.- BR-12.5M 3+1 surge protective device (SPD) is suitable for AC 50/60Hz TT power supply system.- Special design for saving installation space.- It protect to indirect and direct lightning effect or other transient over voltage- High discharge current.- SPD design according with GB18802.1/IEC61643-1 standard.- Indication

T2 AC 2 Poles (20 -40 kA) Surge Protection Device Plug-in Surge Suppression Devices T2 AC 2 Poles (20 -40 kA) Surge Protection Device Specifications: • 2 Module widths. • This AC SPD is a surge protection device suitable for power supply system of AC 50/60 Hz • Din Rail Mounted • It is according to IEC61643-1, GB18802.1 standards. • Flag Indication – Green = Good, Red = Replace. • There is a failure release mounted on the module of surge protection device. • Nominal Discharge

TVSS Lightning Arrester 40KA Surge Protector Devices 1P+NPE SPDs Din-Rail Mount Britec BR-40 TVSS Lightning Arrester 40KA Surge Protector Devices Product Description: • The surge arrestors BR-40 meet the Class II requirement class according to IEC 61643-11. • Britec’s BR-40 series of SPDs are designed for equipment protection from transient overvoltage events. • The use of high-performance varistors permits a rapid response time and a low protection level, without any line

PV DC SPD 20ka-40ka DC Module Surge Protection Device Designed for Solar System PV DC SPD 20ka-40ka DC Module Surge Protection Device Description: • BRPV3 PV Surge Protective Device 40KA DC SPD suitable for the new energy wind power generation system, its working voltage covers 600V, 1200V and 1500V. • The BRPV series Surge Protection are designed to protect against lightning surge voltages in photovoltaic power supply networks. • It is installed in the main power system at

PV SPD 600V DC Lightning Arrestor Din Mount Plastic Double Pole 20-40 kA PV SPD 600V DC Lightning Arrestor Description: • BRPV2 surge protector series is suitable for the new energy solar photovoltaic power generation systems or other dc power supply system of lightning protection, the maximum continuous operating voltage DC500V, 600V. • BRPV2-600 is type 2 surge protector is designed to protect against lightning surge voltages in photovoltaic power supply network •

40ka SPD 3-Phase MOV Power Surge Protector Industrial Voltage Protection Device 40ka SPD 3-Phase MOV Power Surge Protector Details: • 40kA 275V Class C AC Surge Protection Device, Surge Arrester, AC SPD for 3 Phase Supply. • Type 2 surge protectors are compact devices designed to protect 3-phase+neutral networks at the main switchboard. • Surge voltage arrester combination 4-channel (in the 3+1 circuit), for mounting on 35mm DIN rail, voltage 230 V AC. • The products are

Power Surge Voltage Protector 40ka Lightning Surge Arrester China Suppliers Power Surge Voltage Protector 40ka Lightning Surge Arrester Description: • Britec new SPD’s provides solutions suitable for all types of installations and all risk levels. • Extremely low voltage protection level • For protection against transient overvoltage to be effective, the position of the SPD in the installation and the type of SPD must be appropriate for the level of risk. • Green window will

AC 50KA/100kA Din Rail Anti-lightning Protective Arrester 1P+NPE Din Rail Anti-lightning Protective Arrester Brief introduction: BR-50GR series surge protective device (hereinafter called SPD) is suitably used in the TT, TN-S and other power supply system of AC 50/60Hz, rated voltage up to 275V, to protect from direct and indirect lightning impulse and other transient over voltage. As per the conditions of IEC61643-1:1998-02 standard, Class I surge protective device, it is

Type 1 surge protection device with 50kA/100kA impulse current rating, UL94-V0 flame retardant enclosure, and ultra-fast ≤100ns response. Features remote alarm interface, modular DIN rail mounting, and comprehensive lightning protection for industrial power systems. Complies with IEC/EN 61643-1 standards and includes visual status indicators.

Type 1 surge protection device with 25kA lightning impulse current rating and ≤100ns response time. Features fireproof UL94-V0 thermoplastic enclosure, visual status indicator, and 35mm DIN rail mounting. Certified to TUV, CE, and CB standards for reliable AC power system protection against transient overvoltages.

Professional Type 1 surge protector with 25kA lightning impulse current rating and 1.5kV protection level. Features 3P+NPE configuration, thermal disconnector, and UL94-V0 enclosure. Suitable for residential, commercial, and industrial applications with 21 years manufacturing expertise.

Professional indoor surge protection device with 25kA lightning impulse current rating and Type 1 + Type 2 classification. Features 275V operating voltage, ≤1.8kV protection level, and -40℃ to +80℃ operating range. TUV certified with remote monitoring capability and visual status indicators for reliable electrical system protection.

Type 1 surge protection device with 50kA lightning impulse current and ultra-fast ≤100ns response time. Features spark gap technology for high capability and extended lifespan, designed for direct lightning strike protection in single-phase TN grids. TUV CE CB certified with ISO9001 quality management system.

Industrial-grade 3-phase surge protection device with 50kA lightning impulse current rating and 200kA maximum discharge capacity. Features thermal protection, fire-retardant construction, and compliance with IEC61643 standards. Ideal for residential, commercial, and industrial electrical system protection against lightning strikes and transient overvoltages.

Professional Type 1+2 surge protection device with 12.5kA lightning impulse current and 275V operating voltage. Features ultra-fast 25ns response time, ≤1.3kV protection level, and no follow current technology. Certified to IEC 61643-11 standards for reliable AC power system protection against lightning and transient overvoltages.

Professional 320V three-phase 4P surge protective device offering 12.5kA lightning impulse protection and Type 1+2 classification. Features plug-and-play design, built-in temperature control, and clear visual indicators. Certified with TUV, CE, CB, and ISO 9001, with 2-5 year warranty options for comprehensive electrical system protection.

Professional Type 2 surge protective device with 40kA maximum discharge capacity and 320V operating voltage. Features include IEC 61643-11 compliance, UL94-V0 thermoplastic construction, automatic disconnection system, and visual status indication. Ideal for protecting electrical equipment from lightning strikes and power surges in AC 50/60Hz systems.

275v lightning surge protector Product Description: Surge Protection Device is a reliable and cost-effective solution for overvoltage protection. It is designed to protect sensitive electronic equipment from high voltage surges and lightning strikes. It is suitable for residential and commercial applications. It features a maximum surge current of 20kA-200kA, a warranty of 5 years, a voltage rating of 275V-440V, and it is compliant with IEC standard. Surge Protection Device