Surge Protection Device

Dc Spd 600v Surge Protective Device Solar Pv System For Lightning Arrester • BR-40 1+1 is a DIN rail mounted 230V AC SPD that offers hybrid MOV and GDT technology. • Lightning surge protector with compact construction design • Typically installed to protect 230V AC single phase power supplier from overvoltage. • 35mm2 DIN-rail in accordance with EN 50022/DIN46277-3 • Application systems: TT, IT, and TN power supply system. • Low residual voltage and quick response. •

600V Surge Protection Device PV Surge Arrester SPD Surge Protective Device 2P 600V Surge Protection Device PV Surge Arrester Description: • DC Surge protection device to protect your PV installation. • When the SPD fails in breakdown for over heat or over-current, the failure release will help electric equipment separate from the power supply system and give the indication signal • Rated voltage: 600 V DC. • Safety super wide electrical spacing and creepage distance, high

Class I+II Iimp 12.5kA SPD Lightning Arrester 1P Surge Arrester BRITEC BR-12.5M Class I+II Iimp 12.5kA SPD Lightning Arrester 1P Surge Arrester Product description: • Prewired complete unit consisting of a base part and plug-in protection modules • Designed according to IEC 61643-11/EN 61643-11/GB18802.11. • High discharge capacity due to heavy-duty zinc oxide varistors • High discharge capacity, quick response • High reliability due to "temperature-controlled" SPD monitoring

7ka T1t2 Surge Arrester Lightning Arrester 4P Surge Protective Device 7ka T1t2 Surge Arrester Lightning Arrester 4P Surge Protective Device Overview: • BR-7M 4P surge protective device (hereinafter referred to as SPD) are suitable for AC 50/60Hz, rated voltage up to 320v TN-S power supply system• Prewired complete unit consisting of a base part and plug-in protection modules• It protect to indirect and direct lightning effect or other transient overvoltage• High discharge

Class D T3 10kA 10kV Power Line Surge Arresters Technical Data: BR230-30 BR230-75 BR230-150 BR230-275 Protection class Type 3, Class III Norminal a.c. voltage Un 24V 60V 120V 230V Max. continuous operating a.c. voltage Uc 30V 75V 150V 275V Max. continuous operating d.c. voltage Uc 38V 100V 190V 300V Nominal discharge current (8/20μs) In 5kA 5kA 5kA 5kA Max. discharge current (8/20μs) Imax 10kA 10kA 10kA 10kA Protection level Up ≤ 630V ≤ 730V ≤ 800V ≤ 1500V Combined impulse

DC Solar Surge Protection 3P for Photovoltaic System SPD Pluggable Lightning Protective Device DC Solar Surge Protection 3P for Photovoltaic System SPD Description: • Rated voltage: 1000 V DC • It is design according to IEC and GB standard • Maximum discharge current: 40KA • It is use for high temperature resistant plastic with excellent tightness, and easy to install wiring. • High Energy Varistor • Adopt temperature control circuit technology which has built-in over current

40kA AC 1P + N-PE Single Phase Class II Surge Protection Device Class C Thunder SPD 40kA AC 1P + N-PE Single Phase Class II Surge Protection Device Product Description: • BR-40 1+1 is a DIN rail mounted 230V AC SPD that offers hybrid MOV and GDT technology. • Lightning surge protector with compact construction design • Typically installed to protect 230V AC single phase power supplier from overvoltage. • 35mm2 DIN-rail in accordance with EN 50022/DIN46277-3 • Application

80ka 2P 275V AC Class II Surge Protection Device SPD for Industrial Power Lightning Protector 80ka 2P 275V AC Class II Surge Protection Device SPD Description: • Class II AC surge protector designed for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 1-2 and higher. • Type 2 is designed to protect electric installations and sensitive equipment against indirect surges with ensuring a low protection level (Up). • Quick

Type 1+2 275V Surge Arrester Surge Protection Device Surge Protection Device Product Description: • Surge protection device(SPD) is an indispensable device for lightning protection of electronic equipment. • Class I+II / Type 1+2 3 phase 4P surge protection devices. • Consisting of a base part and 4 MOV plug-in protection modules. • The core parts are metal oxide vristor components with high discharge capacity. • Low residual voltage and quick response • Reliable control