Special Alloys For Aerospace And Defense

1 PRODUCT World first calss quality stainless steel AISI 440C (UNS S44004) bright bar for high end application such the wing wave generator components 2 EQUIVALENT DESIGNATION UNS S44004, X105CrMo17, W.Nr.1.4125, SUS 440C, 9Cr18Mo, 102Cr17Mo, SAE 51440C 3 OVERVIEW AISI 440C stainless is a martensitic stainless steel with high carbon and chromium content and designed to provide stainless properties with maximum hardness. It has been used primarily as a bearing steel, and is

Alloy 13-8Mo (UNS S13800) semi-product for machined fastener, shafts, landing gear part, pin, lockwasher, etc. 1 PRODUCT Alloy 13-8Mo (UNS S13800) semi-product for machined fastener, shafts, landing gear part, pin, lockwasher, aircraft component etc. Alloy 13-8Mo is available in following standard semi-finished forms: Bar and Rod Delivery condition: Forged, rolled, drawn, heat treated, oxidized, descaled or pickled, turned, peeled, ground or polished Shape and profile Rolled

High strength steel 300M plate, bar, tube, forging for aircraft landing gear, flap track and structural application 1 PRODUCTUltra-high strength steel 300M for aircraft landing gears, flap tracks and other structural applications.Product forms available as plate, bar, tube, forging etc. 2 APPLICATIONAircraft landing gears, flap tracks and other structural applications 3 OVERVIEW300M steel is a modified 4340 steel with added silicon allowing for use of a higher tempering

Alloy 520 (Udimet alloy 520) bars, forgings for aircraft and land based gas turbine blade etc. 1 PRODUCT Alloy 520 (Udimet alloy 520) bars, forgings, sheets and bolts etc. 2 APPLICATION Alloy 520 developed for use in the 1400-1700°F (760-927°C) temperature range, the alloy has excellent structural stability and unusually good fabricability. The primary application for alloy 520 is blading for aircraft and land-based gas turbines. And sheets and bolts for industrial and marine

AMS 5788, UNS 5387 STELLITE 6 bar, pipe, wire, block, ring for aerospace, chemical industry, auto etc. 1 PRODUCT AMS 5788, UNS R30006, UNS 5387, STELLITETM 6 bar, pipe, wire, block, ring for aerospace, chemical industry, auto, petro-chemical industries, denta, steam engine, extruding die etc. 2 EQUIVALENT DESIGNATION AMS 5788, UNS R30006, UNS R30106, UNS W73006, UNS W73036, UNS 5387, AWS A5.13, AWS A5.21 3 APPLICATION Mechanical components for chemical industry, auto,

Precipitation hardening stainless steel UNS S17400, 17-4PH, AISI 630 for jet engines and land vehicle structures PRODUCT Precipitation hardening stainless steel UNS S17400, 17-4PH, AISI 630 for jet engines and land vehicle structures, etc. EQUIVALENT DESIGNATION 0Cr17Ni4Cu4Nb, 17-4PH, AISI 630, SUS 630, W.Nr. 1.4542, X5CrNiCuNb16-4 PRODUCT FORM Product available in bar (round, flat, hexagon, square, section), wire, forgings, tube, ring, plate, sheet and strip, etc. In all

Corrosion and heat resistant alloy UNS N06600, W.Nr.2.4816, INCONEL® 600, VDM® Alloy 600 for aerospace PRODUCT Corrosion and heat resistant alloys UNS N06600 for aerospace EQUIVALENT DESIGNATION NS312, GH3600, W.Nr.2.4816(EN), NiCr15Fe(EN), INCONEL® 600, VDM® Alloy 600 / 600H, NiCr15Fe8(ISO), NA 14(UK), NC15Fe(AFNOR) OVERVIEW UNS N06600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical

Stellite X-45 bars, rings and various castings for aerojet engines and turbochargers turbine blades etc 1 PRODUCT Stellite X-45 bars, rings, master alloys and various castings. 2 EQUIVALENT DESIGNATION ASTM A567 Grade 13 3 APPLICATION Typical application includes aerojet engines and turbochargers cast turbine blades and guide vanes, bearing, housing, medical devices etc. 4 OVERVIEW Stellite is a hard alloy resistant to various types of wear and corrosion as well as high

AMS 5894 (STELLITE 6B) forging, bar, sheet and plate for aerospace components and parts, etc. 1 PRODUCT AMS 5894, 60Co-28Cr-4.5W-1.15C (STELLITETM 6B) forging, bar, sheet and plate for aerospace components and parts 2 EQUIVALENT DESIGNATION AMS 5894, 60Co-28Cr-4.5W-1.15C, STELLITETM 6B, STELLITETM 6K 3 APPLICATION These products have been used typically for parts requiring wear resistance and minimum galling or seizing tendencies at room and elevated temperatures, but usage

Alloy S240 (UNS S11900) bar, shapes, rod, wire, forging for jet engine, land vehicle component, sophisticated armor etc 1 PRODUCT Alloy S240 (UNS S11900) bar, shapes, rod, wire, forging for jet engine, land vehicle components, sophisticated armor etc. Alloy S240 is available in following standard semi-finished forms: Bar and Rod Delivery condition: Forged, rolled, drawn, heat treated, oxidized, descaled or pickled, turned, peeled, ground or polished Shape and profile Rolled

UNS S15700 (PH15-7Mo®, AISI 632) stainless steel for aircraft components requiring high strength at elevated temperature 1 PRODUCT UNS S15700 (PH15-7Mo®, AISI 632) stainless steel for aircraft components requiring high strength at elevated temperatures. UNS S15700 is available in product forms as plate, sheet, strip, pipe, tube, bar (round, flat, hexagon, square, shapes), wire (profile, round, flat, square), forgings, etc. 2 EQUIVALENT DESIGNATION Type 632(ASTM), 0Cr15Ni7Mo2A

Enhanced fatigue resistant Alloy 625M (N06626) sheet, strip, foil, fitting, tube for aerospace exhaust etc 1 PRODUCT Enhanced fatigue resistant Alloy 625M (UNS N06626) for aerospace exhaust etc. Product forms available as sheet, strip, foil, fitting, tube etc. 2 EQUIVALENT DESIGNATION UNS N06626, W.Nr.2.4856(EN), Inconel® alloy 625LCF,Haynes® 625SQ® alloy 3 APPLICATION Alloy 625M is readily fabricated and welded using practices common to Alloy 625. Alloy 625M sheet and strip

Corrosion resistant Alloy X (N06002) bar, forging, section, plate, wire, pipe for gas turbine engine etc 1 PRODUCT Corrosion resistant Alloy X for gas turbine engines for combustion zone components such as transition ducts, combustor cans, spray bars and flame holders as well as in afterburners, tailpipes and cabin heaters. etc. Product forms available as castings, rod, bar, forgings, forging block, extruded section, plate, sheet, strip, wire, pipe and tube etc. 2 EQUIVALENT

Alloy X-750, UNS N07750 forging, bar, plate, tube, bolts etc, high-end specialty alloys R&D and manufacturer PRODUCT Alloy X-750, UNS N07750 forgings, bars, plates, tubes, springs, bolts etc for aerospace etc. EQUIVALENT DESIGNATIONS GH4145, Inconel® X-750, NiCr17Fe7TiAl(EN), Haynes® X-750 alloy, VDM® Alloy X-750, (Nicrofer 7016 TiNb), W.Nr.2.4669(DIN), NiCr15Fe7TiAl(DIN), NiCr15Fe7Ti2Al(ISO), NC15TNbA(AFNOR) PRODUCT FORMS Available product are sheet, strip, plate, round bar,

Outstanding Alloy 625, UNS N06625 for aircraft engine exhaust, thrust chamber tubing for rocket, etc. PRODUCT High tensile, creep, and rupture strength; out-standing fatigue and thermal-fatigue strength; oxidation resistance; and excellent weldability and brazeability are the properties of alloy 625 that make it interesting to the aerospace field. It is being used in such applications as aircraft ducting systems, engine exhaust systems, thrustreverser systems, resistance

Alloy 105, Nimonic® alloy 105 for ultra-supercritical thermal turbine blade, forgings, ring, fastener etc 1 PRODUCT Alloy 105, Nimonic® alloy 105 for ultra-supercritical thermal turbine blade, aero-engine turbine blades, forgings, ring, discs, sections, bolts and fasteners, etc. 2 EQUIVALENT DESIGNATION GH4105, W.Nr.2.4634, NiCo20Cr15MoAlTi(DIN), HR3(BS) 3 APPLICATION Alloy 105 is used for thermal turbine blades, materials for key high temperature components of ultra

Nickel iron alloy 36 (UNS K93600, W.Nr. 1.3912) bar, tube, strip, wire, forging for laser component etc. 1 PRODUCT Nickel iron alloy 36 (UNS K93600, W.Nr. 1.3912) semi-products for laser component etc. Alloy 36 is available in following standard semi-finished forms: Sheet Delivery condition: Hot or cold rolled, heat treated, descaled or pickled Strip Delivery condition: Cold rolled, heat treated, pickled or bright annealed Bar and Rod Delivery condition: Forged, rolled, drawn

High performance Alloy 617 (N06617, W.Nr.2.4663) semi-products for jet engines and aircraft gas turbine etc. 1 PRODUCT High performance Alloy 617 (N06617, W.Nr.2.4663) semi-products for jet engines and aircraft gas turbine etc. Alloy 617 is furnished in a wide range of standard mill forms including pipe, tube, sheet, strip, plate, round bar, flat bar, forging, hexagon, shaped section and wire, etc. 2 EQUIVALENT DESIGNATION UNS N06617, NiCr23Co12Mo (EN), W.Nr. 2.4663,

PRODUCT Corrosion and heat resistant alloys UNS N06600 for aerospace EQUIVALENT DESIGNATION NS312, GH3600, W.Nr.2.4816(EN), NiCr15Fe(EN), INCONEL® 600, VDM® Alloy 600 / 600H, NiCr15Fe8(ISO), NA 14(UK), NC15Fe(AFNOR) OVERVIEW UNS N06600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and

1 PRODUCT Shape memory alloys (SMA) are materials composed of more than two kinds of metal elements, which have shape memory effect through thermoelasticity, martensitic transformation and inversion. At present, titanium based, copper based and iron-based shape memory alloys have been applied. NiTi shape memory alloy is the most comprehensive and best shape memory material among shape memory materials. It has