FTTH Fiber Optic Terminal Box

FTTH Fiber Optic Surface Box 2 SC Adapter Ports Faceplate Wall Socket / Outlet FTTH Fiber Optic Surface Box 2 SC Adapter Ports Faceplate Wall Socket / Outlet (G008) is indoor floor mounted or wall mounted application, it can install 2 SC simplex adapters or 4 LC duplex adapters in it. Features: P/N G008 Dimensions 86*86*24.2 mm Material High quality ABS plastic Color Gray, White IP Rate IP32 Splicing Capacity 4 Fibers Adapter Port 2 SC Simplex adapter ports Cable Port 1 in &

Din Rail Case Optical Mounted Box Plastic 6 12 Port With SC/LC/ST/FC Adapter Din Rail Case Optical Mounted Box Plastic 6 12 Port With SC/LC/ST/FC Adapter (EDINFB12) is a special fiber terminal box and usually used in the rack cabinets, it integrate fiber splicing, fiber distribution, fiber termination and fiber contection toge Features: P/N EDINFB12 Dimensions 133*136.6*35 mm Material High quality ABS plastic Color Gray, White IP Rate IP45 Splicing Capacity 12 Fibers Adapter

Wall Mount 2 Ports FTTH MINI Box Fiber Optic Terminal Box Rosette Preloaded With SC/APC Adapters and Pigtails Wall Mount 2 Ports FTTH MINI Box Fiber Optic Terminal Box Rosette Preloaded With SC/APC Adapters and Pigtail (FP-016) is with mini size and good performance, small size can accomodate 2 layers, upper layer is for fiber cable coiling and splicing, lower layer is for install adapters and cable outlet. Features: P/N FP-016 Dimensions L:100*W:80*H:23.4 mm Material High

4 SC/APC Simplex Ports Outdoor Fiber FTTH Box CTO Optical Distribution Box IP65 4 SC/APC Simplex Ports Outdoor Fiber FTTH Box CTO Optical Distribution Box IP65 (BC04A) is reasonable size with good permance. It is devided into 2 spaces for FTTH : one is to load 1pc fiber adapter plate of 9 SC simplex adapter panel; another is to install 1pc 1:4 PLC steel tube type splitter and splice fibers in it. Features: P/N BC04A Dimensions 141.6x211.6x39.8 mm Material High quality ABS

Features: Standard size, can be rack-mount and wall-mount Splice tray inside changeable Can be used in 19', 23' standard distribution frame Suitable for ribbon and single fiber Various panel plate to fit different adapter interface Front mark on the plate is easy for identification and operation Specification: Model: ODF-RW24-A Material: Cold-roll steel ABS material splice tray: OST-010G 1pc splice tray; each splice tray 24 cores Dimension: 482x341x44mm Capacity: 24 cores

Features: 1)Material is ABS plastic, light weight. 2)Variety of cold-rolled steel adapter plate for choice based on different demands; 3)10 inch advanced muting drawer slide rail, slidable smoothly, operation easy and convenient; 4)Compatible to 19', 21' and 23' rack-mounting, installation depth is adjustable. 5) There are cable entry/exit ports in front and back, satisfy different types cabinet and rack installed Configuration form: Model Capacity Adapter type Splice tray

Specification: Table 1 - 1×N PLC optical splitter Parameter Unit 1x2 1x4 1x8 1x16 1x32 1x64 Standard Grade Insertion Loss Max dB 4.2 7.2 10.5 13.7 17.0 20.6 Channel Uniformity Max dB 0.6 0.8 1.0 1.6 1.6 2.0 Polarization Dependent Loss Max dB 0.2 0.3 0.3 0.3 0.3 0.5 Operation Wavelength nm 1260~1650 Return Loss MIN dB 55(Premium Grade) / 50(Standard Grade) Directivity MIN dB 55 Operation Temperature ºC -40~+85 Storage Temperature ºC -40~+85 Fiber Type - G.657A 250um Basic type

Specification: Table 1 - 1×N PLC optical splitter Parameter Unit 1x2 1x4 1x8 1x16 1x32 1x64 Standard Grade Insertion Loss Max dB 4.2 7.2 10.5 13.7 17.0 20.6 Channel Uniformity Max dB 0.6 0.8 1.0 1.6 1.6 2.0 Polarization Dependent Loss Max dB 0.2 0.3 0.3 0.3 0.3 0.5 Operation Wavelength nm 1260~1650 Return Loss MIN dB 55(Premium Grade) / 50(Standard Grade) Directivity MIN dB 55 Operation Temperature ºC -40~+85 Storage Temperature ºC -40~+85 Fiber Type - G.657A 250um Basic type

Specification: Table 1 - 1×N PLC optical splitter Parameter Unit 1x2 1x4 1x8 1x16 1x32 1x64 Standard Grade Insertion Loss Max dB 4.2 7.2 10.5 13.7 17.0 20.6 Channel Uniformity Max dB 0.6 0.8 1.0 1.6 1.6 2.0 Polarization Dependent Loss Max dB 0.2 0.3 0.3 0.3 0.3 0.5 Operation Wavelength nm 1260~1650 Return Loss MIN dB 55(Premium Grade) / 50(Standard Grade) Directivity MIN dB 55 Operation Temperature ºC -40~+85 Storage Temperature ºC -40~+85 Fiber Type - G.657A 250um Basic type

Features: 1)Material is ABS plastic, light weight. 2)Variety of cold-rolled steel adapter plate for choice based on different demands; 3)10 inch advanced muting drawer slide rail, slidable smoothly, operation easy and convenient; 4)Compatible to 19', 21' and 23' rack-mounting, installation depth is adjustable. 5) There are cable entry/exit ports in front and back, satisfy different types cabinet and rack installed Configuration form: Model Capacity Adapter type Splice tray

Features: Various panel plate to fit different adapter interface Adapters can be installed: FC, SC, ST, LC Suitable for single fiber and ribbon & bundle fiber cables Special design ensures the excess fiber cords and pigtails in good order No interval and easy for management and operation Application: Telecommunications subscriber loop Fiber to the home (FTTH) LAN/ WAN CATV Specification: Model Fiber Quantity Dimension(cm) Weight(Kg) ODF-08 Max. 8 port 22.5x22.5x6 0.9

Features: Cold rolled steel material Various panel plate to fit different adapter interface Special design ensures the excess fiber cords and pigtails in good order Double door, good for management Specification: Model Material Dimension (mm) Capacity ODF-IW48-D Cold roll steel 361.7*191.8*111.1 48 fibers Application: Telecommunications subscriber loop Fiber to the home (FTTH) LAN/ WAN CATV

Features: Standard size, can be rackmount and wallmount Splice tray inside changeable Can be used in 19', 23' standard distribution frame Suitable for ribbon and single fiber Various panel plate to fit different adapter interface Front mark on the plate is easy for identification and operation 24C with or without fiber optic pigtails and adapters Specification: Model: ODF-RW1U24-B Material: Cold-roll steel ABS material splice tray 2pcs splice trays; each splice tray 12 cores

Wall Mounted FTTH Fiber Optic Terminal Box 8 Core SC Simplex Adapter OTB-C08 is used for FTTH, it provide protective connection for fiber optic cable and pigtail. The box is ABS material, mainly use for indoor and corridor installation. Product Feature: 1) 2 cable ports suitable for max. 15mm cable in and out. 2) Cable no cutting and direct connection. 3) Turnover splice tray for max. 12 fiber splicing. 4) Snap-in type, easy to open and close, can repeatable use. 5) Can load

Features: Light weight, small size, easy installation. Suitable for DIN rail application. Provide splice protection of fiber cable and pigtails. Made of cold-rolled steel. Electrostatic Powder spraying,Black or Hoar color optional. Adapter port is optional for SC, FC , ST or LC duplex adapters.

CH021 is a Mini. inline type fiber optic splice closure. It is made of high-quality ABS material. There is silicone sealing gasket between the cover and bottom. Features: Small size, reasonable design for cable protection ABS plastic material, white and black color available 2 cable port (1 in 1 out) diameter 8.0mm Inside 6 fiber slot for max. 12 fibers splicing. With fixing cable strengthen core parts Wall mounted, aerial hang application Dust-proof and waterproof, IP65.

APRS1U/24C Rotary patch panel apply to the protective connection of cable and pigtail,the Material is High quality ABS, brackets is cold rolled steel,this panel mainly installed in fiber optic cabinet and rack. Features: 1)Max capacity is 36cores ( SC Simplex port adapters) 2)Special sliding design, operation easy and convenient 3)Variety of coled-rolled steel adapter plate for choice based on different demands 4)Material is ABS plastic, light weight.Black or white optional.

Product Name BP023 ABS Plastic Fiber Optic Wall Mount Termination Box 36 Fibers Product Category Fiber Optic Connection Distribution Protection Terminal Box Application Environment Outdoor Aerial Hanged Feature Horizontal 3 splice trays with 12 fibers each Material High Quality ABS Material Waterproof Grade IP65 Dimension 232x358.5x130.5mm Adapter port Can load 18pcs SC simplex adapters Product Features Lockable Small and light-weight Reliable and durable Easy installation

Fiber Optic Terminal Box 1X8 PLC Splitter Type ABS Material OTB-P020 is a fiber optic terminal box that suitable for optical fiber splicing, distribution and protection. It is reasonable design for fiber arrangement, and for outdoor wall mounted application. Features Material: PP plastic Max. 17 fibers Can load 9pcs SC simplex adapter Can load 1pc PLC 1:8 steel tube type splitter 4pcs Φ9mm entry cable ports & 8pcs Φ3.0mm cable ports Cable entry without cutting Waterproof,

Drop cable protection box with 1pc SC fast connector IP68 Mini 1 fiber closure PFB-MINI-A is a fiber optic drop cable protection box that used for drop cable connecting, splice and protection. It can install 1pc SC simplex adapter and 2pcs fast connector connection inside. The box is made of high quality ABS material, and with sealing gasket between box cover and base for waterproof application. Both side can lead in/out 2*3mm FTTH drop cable or 3mm round cable. Feature: 1