Metal Alloy

High carbon silicon is a good temperature resistant material. Adding silicon carbon alloy during the steelmaking process can increase the furnace temperature, increase the conversion rate of ferroalloys, and accelerate the reaction rate between molten steel and elements. High carbon silicon is a new type of alloy used for converter, which can replace ferrosilicon, silicon carbide and carburetor, reduce the amount of Oxygen scavenger, and be used for deoxidization and alloying

Products attributes of aluminium cut wire shot Item Name Alumium cut wire shot 99.9995% Pure aluminium in steel industry aluminium cut wire shot Purity 99.999%, 99.9995% Shape Cylindrical, According to your request Available size Normal size:2*5mm,3*3mm,6*6mm Customization is available Certificates ISO9001:2008, SGS, The third test report Technics Patented thermo-mechanical process Application Widely used in coating processing industries A: Solar Photovoltaic Appication. B:

Cast Metal Alloy stainless steel cut wire shot Adopting the Drawing into wire, cutting, grinding into roundness and other procedures to make. The surface is bright, no rust, round dew form (cutting shot, column form). It extensive applied in the surface of treatment of shot blasting, such as Cu, Al, Zn and Stainless steel shot etc.. it can make the surface of work piece finishing afer processed, extend metal substance and don’t rust, however, needn’t acid washing and the wear

304 Stainless steel cut wire shot / 410 stainless steel shot Stainless steel cut wire shot is made by cutting Stainless Steel Wires of different diameters and rounded off by grinding the sharp edges to make round balls. Can be divied into: As cut Conditioned Double condition Spherical conditioned TYPE C Cr Ni Mn Mo 410 Martensite ≤0.15 11.50-13.50 ≤0.60 ≤1.00 430 Ferrite ≤0.12 16.00-18.00 ≤0.60 ≤1.00 201 Austenite ≤0.15 16.00-18.00 3.5-5.5 5.50-7.50 202 Austenite ≤0.15 17.00

Abrasive Steel Grit Metal Alloy G120 - G10 For Sandblasting Stainless Steel Surface STEEL GRIT: Size: G10, G12, G14, G16, G18, G25, G40, G50, G80, G120 The Major Technological Index: Products Steel Grit Chemical Composition C 0.70~1.20% Mn 0.60~1.20% Si 0.40~1.20% S ≤0.05% P ≤0.05% Hardness GP:42~50HRC (399~509HV) GL:56~60HRC (620~713HV) GH:63~66HRC (795~889HV) Minimum Density 7.4g/cm3 Application: 1. Blast cleaning of cast steel grit: Used for blast cleaning of casting, die

Sandblasting Cast Steel Grit G25 Casting Alloys For Stainless Steel Surface Steel Grit is made by crushing steel shot to angular particle subsequently tempered to different hardness to cater for different application, screened by size according to SAE Standard specification. SAE Application G-12 G-14 G-16 Blasting/descaling medium-to-large cast steel, cast iron, forged pieces,steel plate and rubber adhered work pieces. G-18 G-25 G-40 Cutting/grinding stone; Blasting rubber

Black / Grey Color Metal Alloy Cast Steel Shot S550 For Surface Treatment Cast Steel Shot 1.Model:S780/SS2.5 , S660/SS2.0 , S550/SS1.7 ,S460/SS1.4 ,S390/SS1.2 ,S330/SS1.0 ,S280/SS0.8 ,S230/SS0.6 , S170/SS0.5 S140/SS0.4 , S110/SS0.3 , S70/SS0.2 2. Shape: round balls 3. Color: metal black 4.Operative Standards: In accordance with standards of GB/T18838.3－2008 Steel Shot and Steel Grit,SFSA20-66Cast Steel Abrasive, SAE J827 Cast Steel Shot, SAE J1993High Carbon Steel Grit, YB

surface Treatment Cast Steel shot S660 Cast Steel Shot 1.Model:S780/SS2.5 , S660/SS2.0 , S550/SS1.7 ,S460/SS1.4 ,S390/SS1.2 ,S330/SS1.0 ,S280/SS0.8 ,S230/SS0.6 , S170/SS0.5 S140/SS0.4 , S110/SS0.3 , S70/SS0.2 2. Shape: round balls 3. Color: metal black 4.Operative Standards: In accordance with standards of GB/T18838.3－2008 Steel Shot and Steel Grit,SFSA20-66Cast Steel Abrasive, SAE J827 Cast Steel Shot, SAE J1993High Carbon Steel Grit, YB/T5149-1993 Cast Steel Shot, YB/T5150

Metal Alloy Steel cut wire shot size 2.0mm hardness 37HRC min Steel cut wire shot technique specification: product Steel cut wire shot Chemical composition C 0.45~0.75% Mn 0.40~1.20% Si 0.10~0.90% S

steel cut wire shot for surface Treatment Steel cut wire shot technique specification: product Steel cut wire shot Chemical composition C 0.45~0.95% Mn 0.40~1.20% Si 0.10~0.98% S

High Efficiency Compound Inoculant Series ,Inoculant model name chemical composition(%) others Si Ca Al Ba J-1 BiSi 68.0-72.0 1.0-2.0 1.0-1.5 1.0-3.0 Bi fit J-2 BaCaRE 66.0-72.0 1.0-2.0 1.2-1.8 2.0-4.0 RE2-4 J-2B BaCaRE 55.0-60.0 1.0-2.0 1.0-1.5 9.0-11.0 RE9-11 J-3 BaCaSi 68.0-72.0 1.0-2.0 1.2-1.8 1.0-3.0 - J-4 BaSi 68.0-72.0 1.0-2.0 1.0-2.0 4.0-6.0 - J-5 SbSi 66.0-72.0 1.0-2.0 1.0-1.8 1.0-3.0 Sb fit J-6 BaSi+C 33.0-40.0 1.0-2.0 0.8-1.5 1.0-3.0 C33.0-45 J-7 SrSi 72.0-74.0

Nodulizer , Ferro Silicon Magnesium Alloy FeSiMgRe Nodulant 1)Lanthanum cerium light rare earth nodulizer form number and composition content: Form number Simplified number Chemical Composition Mg RE Ca Si Al Fe YD522 5-2 4.8-5.3 1.8-2.2 1.8-2.3 44.0-46 0.6≦ remainder YD622 6-2 5.8-6.3 1.8-2.2 1.8-2.3 44.0-46 0.6≦ remainder YD722 7-2 6.8-7.3 1.8-2.2 2.0-2.5 43.0-45.0 0.6≦ remainder YD732 7-3 6.8-7.3 2.8-3.3 1.8-2.3 43.0-45.0 0.6≦ remainder YD822 8-2 4.8-5.3 1.8-2.2 2.0-2.5 43

High-C Silicon Alloy with Si 68% used instead of Ferro Silicon High carbon ferro silicon is by-product of Silicon Metal. The content for Silicon is less than 70%, and the content for Carbon is more than 10%. High carbon Ferro silicon have multiple functions as follows: 1. Replacement for Silicon metal or Ferro Silicon in some area. 2. Multiple Deoxidizer by silicon & Carbon. 3. High recovery rate of Silicon by Carbon 4. Less impurity because of high content of Carbon (the

High Performance Calcium Silicon Metal Cored Wire for Steel Melting Cored wire in the ladle refining process has been widely used, will be pulverized into a certain size of the powder additive package (deoxidizer, desulfurization agent, alloy) wrapped in a narrow strip of continuous formation of a linear material, and its Winding into coils, according to the different core powder, cored wire features and uses are different. Cored wire is mainly used in steelmaking, which can

High Carbon Silicon with Si 50% used instead of Ferro Silicon High Carbon Silicon Application: 1. High Carbon Silicon is often used as deoxidizer in steel making. 2. High Carbon Silicon also can be used as alloy elements join agent,which is widely used in low alloy steel,non-ferrous metal,bearing steel,heat- resistant steels and electrician silicon steel. 3. High Carbon Silicon commonly used as a reductant in ferroalloy production and chemical industry. High Carbon Silicon No

High Carbon Silicon with Si 55% used instead of Ferro Silicon High Carbon Silicon Application: 1. High Carbon Silicon is often used as deoxidizer in steel making. 2. High Carbon Silicon also can be used as alloy elements join agent,which is widely used in low alloy steel,non-ferrous metal,bearing steel,heat- resistant steels and electrician silicon steel. 3. High Carbon Silicon commonly used as a reductant in ferroalloy production and chemical industry. High Carbon Silicon No

High Carbon Silicon with Si 60% used instead of Ferro Silicon High Carbon Silicon Application: 1. High Carbon Silicon is often used as deoxidizer in steel making. 2. High Carbon Silicon also can be used as alloy elements join agent,which is widely used in low alloy steel,non-ferrous metal,bearing steel,heat- resistant steels and electrician silicon steel. 3.High Carbon Silicon commonly used as a reductant in ferroalloy production and chemical industry. High Carbon Silicon No.

High Carbon Silicon with Si 68% used instead of Ferro Silicon High Carbon Silicon Application: 1. High Carbon Silicon is often used as deoxidizer in steel making. 2. High Carbon Silicon also can be used as alloy elements join agent,which is widely used in low alloy steel,non-ferrous metal,bearing steel,heat- resistant steels and electrician silicon steel. 3. High Carbon Silicon commonly used as a reductant in ferroalloy production and chemical industry. High Carbon Silicon No

High Carbon Silicon with Si 65% used instead of Ferro Silicon High Carbon Silicon Application: 1. High Carbon Silicon is often used as deoxidizer in steel making. 2. High Carbon Silicon also can be used as alloy elements join agent,which is widely used in low alloy steel,non-ferrous metal,bearing steel,heat- resistant steels and electrician silicon steel. 3. High Carbon Silicon commonly used as a reductant in ferroalloy production and chemical industry. High Carbon Silicon No

steel ball for mill grinding operations in various metal mines, fossil fuel power station and other industries Forged steel balls have the characteristics of high overall hardness, compact structure, no loss of roundness, no breakage, no deformation and high cost performance. They are suitable for ball mill grinding operations in various metal mines, Fossil fuel power station and other industries, especially in SAG mills. 1, Product specifications Φ 20-150mm 2, Application