Other Wood Pellets Making Machine

Description of straw pellet burner : Biomass pellet burner (machine) is the use of recycling the biomass of the original combustion equipment for energy conversion.Is that existing coal-fired boiler furnace, energy conservation transformation of oil burner gas type, the best choice for replacement. The burner (machine) is the use of renewable biomass solid fuel, alternatives to traditional fuels.Hot water boiler for heating homes,Steam boiler, stove, drying, painting

SSHJ Series Feed Mixer Machine Advantage: 1.Discharging door adopted full open structure and big angle (>90°),ensure material complete discharge and decrease vestigital. 2.The discharging door molding rubber seal to ensure no leakage material. 3.The gap between blade and casing ≤3mm and mixing uniformity CV≤5%(can even reach 2.3%), high mixing uniformity. 4.Mix without dead angle, short cycle, mix time is about 30-120 seconds each batch, discharging time is about 3 minutes. 5

Introduction of feed pellet packing machine: This machine is a smart packaging machine scale developed by our company for granular and irregular feed pellet. It adopts pneumatic gate feeding or belt feeding mode and advanced stepless frequency conversion technology. Packing machine main machines: composed of four parts: automatic weighing and packaging machine, conveying device, sewing machine and feeding machine. The utility model has the advantages of reasonable structure,

Known as automatic biomass pellet boiler, household wood pellet boiler has been widely used for central heating and domestic hot water. It is a stand-alone, energy-saving device and mostly used for supplying heat for hot water. It can also be connected with heating radiator to keep warm. Household wood pellet boiler is the necessity of house, bath center, canteen, college, greenhouse heating, etc. For commercial heating or warming, we are capable to customize commercial wood

Wood Pellet Cooling Machine is a type of counterflow cooling machine. It is mainly used for cooling the pellets in the pelleting section of particles in the factory. The pellets after cooling not only increased the hardness, but also can prevent mildew, they are also easy to transport and store pellets. It is also applied to cool a variety of materials, such as pellets, extruded materials, expansion materials, pressure-chip material, powder, etc, especially extruded materials