Bently Nevada Parts

Product:Bently Nevada 3500/42M-01-00 128229-01 Prox/Seismic I/O Module with internal terminations Description The 3500/42M Proximitor Seismic Monitor: Protects machinery by continuously comparing monitored parameters against configured alarm setpoints to drive alarms. Communicates essential machine information to both operations and maintenance personnel. The 3500/42M Proximitor Seismic Monitor is a four-channel monitor that accepts input from proximity and seismic transducer

Product:Bently Nevada 3500/20-01-01-00 125760-01 Data Manager I/O Module Description The Rack Interface Module (RIM) is the primary interface to the 3500 rack. It supports a proprietary protocol used to configure the rack and retrieve machinery information. The RIM must be located in slot 1 of the rack (next to the power supplies). The RIM supports compatible Bently Nevada external communications processors such as TDXnet, TDIX, and DDIX. While the RIM provides certain

3500/92-01-01-00 125736-01 Bently Nevada Communication Gateway I/O Module Product Overview The 3500/92-01-01-00 125736-01 is a communication gateway configured as a Modbus RS232/RS422 I/O module for the 3500 Series Mechanical Condition Monitoring System. This module integrates monitoring data into process control or automation systems, supporting multiple communication protocols and interfaces. The 3500/92 supports the communication interfaces,communication protocols, and

Product: Bently Nevada 3500/15-05-05-00 106M1079-01 Power Supply Description Description The 3500/15 AC and DC Power Supplies are half-height modules and must be installed in designated slots on the left side of the rack. The 3500 rack can contain one or two power supplies with any combinations of AC and DC. Either supply can power a full rack. When two power supplies are installed in a rack, the one in the lower slot acts as the primary supply, and the other in the upper

Product:Bently Nevada 3500/25-01-03-00 135473-01 Internal Barrier I/O with Internal Terminations Description The 3500/25 Enhanced Keyphasor Module is a half-height, two-channel module used to provide Keyphasor signals to the monitor modules in a 3500 rack. The module receives input signals from proximity probes or magnetic pickups and converts the signals to digital Keyphasor signals that indicate when the Keyphasor mark on the shaft coincides with the Keyphasor transducer.

Product:16710-30 Bently Nevada Armored Interconnect Cables Sku: E13604-8 Bently Nevada No. 16710-30 BENTLY NEVADA CABLE APPLICATION: ACCELEROMETER LENGTH: 9 M 3-CONDUCTOR SHIELDED 22 AWG (0.5 SQ.MM) ARMORED CABLE WITH 3 SOCKET PLUG AT ONE END TERMINAL LUG AT OTHER END MODEL: 16710 Recommended Products: 16710-04 16710-30 16710-33 CI627A 3BSE009799R1 NDBU-95C 3AFE64008366 TB820V2 3BSE013208R1 PM810V2 3BSE013220R1 AO810 3BSE008522R1 PM856K01 3BSE018104R1 NIOC-02C 3AFE64634798

Product:16710-33 Bently Nevada Armored Interconnect Cables Bently Nevada 16710-33 Interconnect Cables With Armored 330400-330425.pdf Product Details: Brand name Bently Nevada Model 16710-33 Product ID 16710-33 Condition NEW Gross weight 1.5kg Packing size 40*35*5cm Payment Term T/T Warranty 1 year Courier Partner DHL, UPS, TNT, FedEx and EMS 16710-33 is designed as Bently Nevada Interconnect Cables with Armored. It can be connected with 330400 and 330425 Accelerometer

Product: 9200-01-05-10-00 Bently Nevada Seismoprobe Velocity Transducers Description Bently Nevada Seismoprobe Velocity Transducer Systems are designed to measure absolute (relative to free space) bearing housing, casing, or structural vibration. The two-wire systems consist of a transducer and appropriate cable. The Seismoprobe family of velocity transducers is a two-wire design that uses moving-coil technology. It provides a voltage output directly proportional to the

Product: 9200-03-05-10-00 Bently Nevada Seismoprobe Velocity Transducers Description Bently Nevada Seismoprobe Velocity Transducer Systems are designed to measure absolute (relative to free space) bearing housing, casing, or structural vibration. The two-wire systems consist of a transducer and appropriate cable. The Seismoprobe family of velocity transducers is a two-wire design that uses moving-coil technology. It provides a voltage output directly proportional to the

Product:3500/64M 176449-05 Bently Nevada Dynamic Pressure Monitor The 3500/64M Dynamic Pressure Monitor is a single slot, fourchannel monitor that accepts input from high temperature pressure transducers and uses this input to drive alarms. The monitor’s one measured variable per channel is bandpass dynamic pressure. You can use the 3500 Rack Configuration Software to configure the bandpass corner frequencies along with an additional notch filter. The monitor provides a

Product: 3500/72M 140471-01 Bently Nevada I/O Module with Internal Terminations 3500/72M Recip Rod Position Monitor The four-channel 3500/72M Recip Rod Position Monitor accepts input from proximity transducers, conditions the signal to provide dynamic and static position measurements, and compares the conditioned signals with user-programmable alarms. Each channel, depending on how you configure it, typically conditions its input signal to generate various parameters called

Product:3500/65-02-00 172109-01 Bently Nevada RTD/ Isolated Tip TC I/O Module, External Terminations Description The 3500/65 monitor provides 16 channels of temperature monitoring and accepts both resistance temperature detector (RTD) and isolated tip thermocouple (TC) temperature inputs. The monitor conditions these inputs and compares them against user-programmable alarm setpoints. The monitor is programmed using the 3500 Rack Configuration Software. You can configure the

Product:Bently Nevada 3500/50M 288062-02 Tachometer Module Description The 3500/50 Tachometer Module is a 2-channel module that accepts input from proximity probes or magnetic pickups (except as noted) to determine shaft rotative speed, rotor acceleration, or rotor direction, compares these measurements against user-programmable alarm setpoints, and generates alarms when these setpoints are violated. The 3500/50 Tachometer Module is programmed using the 3500 Rack Configuratio

Product:Bently Nevada 3500/42M-05-00 135489-02 I/O Module with internal barriers, internal terminations Description The 3500/42M Proximitor Seismic Monitor: Protects machinery by continuously comparing monitored parameters against configured alarm setpoints to drive alarms. Communicates essential machine information to both operations and maintenance personnel. The 3500/42M Proximitor Seismic Monitor is a four-channel monitor that accepts input from proximity and seismic

Product:Bently Nevada 3500/42M-02-00 128240-01 Prox/Seismic I/O Module with external terminations Description The 3500/42M Proximitor Seismic Monitor: Protects machinery by continuously comparing monitored parameters against configured alarm setpoints to drive alarms. Communicates essential machine information to both operations and maintenance personnel. The 3500/42M Proximitor Seismic Monitor is a four-channel monitor that accepts input from proximity and seismic transducer

Product:Bently Nevada 3500/33-03-00 149992-03 16-Channel Low Current Relay Output Module The 3500/33 16-Channel Relay Module is a full-height module that provides 16 relay outputs. You can place any number of 16- channelrelay modules in any of the slots to the right of the Transient Data Interface (TDI) Module. Each output of the 3500/33 16-Channel Relay Module can be independently programmed to perform voting logic. Each relay of the module includes Alarm Drive Logic.

Product:Bently Nevada 3500/33-02-00 149992-02 16-Channel Failsafe Relay Output Module The 3500/33 16-Channel Relay Module is a full-height module that provides 16 relay outputs. You can place any number of 16- channelrelay modules in any of the slots to the right of the Transient Data Interface (TDI) Module. Each output of the 3500/33 16-Channel Relay Module can be independently programmed to perform voting logic. Each relay of the module includes Alarm Drive Logic.

Product:Bently Nevada 3500/77M-03-00 176449-07 Recip Cylinder Pressure Monitor Description The 3500/77M Recip Cylinder Pressure Monitor is a 4-channel monitor that accepts input from Bently Nevada approved pressure transducers, conditions the signal to make various pressure measurements for reciprocating compressors, and compares the conditioned signals with user-programmable alarms. The primary purpose of the 3500/77M monitor is to provide: Machinery protection by continuous

Product:Bently Nevada 3500/65-01-00 145988-02 16-Channel Temperature Monitor Description The 3500/65 monitor provides 16 channels of temperature monitoring and accepts both resistance temperature detector (RTD) and isolated tip thermocouple (TC) temperature inputs. The monitor conditions these inputs and compares them against user-programmable alarm setpoints. The monitor is programmed using the 3500 Rack Configuration Software. You can configure the 16-Channel Temperature

Product:Bently Nevada 3500/62-01-00 163179-03 Process Variable Monitor Description The 3500/62 Process Variable Monitor is a 6-channel monitor for processing machine critical parameters that merit continuous monitoring, such as pressures, flows, temperatures, and levels. The monitor accepts +4 to +20 mA current inputs or any proportional voltage inputs between -10 Vdc and +10 Vdc. It conditions these signals and compares the conditioned signals to user-programmable alarm