Bently Nevada Parts

Product: Bently Nevada 330103-00-05-50-02-05 3300XL 8 mm Proximity Probes without armour Description Description The 3300 XL 8 mm Proximity Transducer System consists of: One 3300 XL 8 mm probe, One 3300 XL extension cable 1 , and One 3300 XL Proximitor Sensor 2 . The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values.

Product: 330103-00-05-05-01-05 Bently Nevada Industrial Proximity Probe Brand New Description Description Overview The Bently Nevada 330103-00-05-05-01-05 is an industrial proximity probe designed for reliable vibration and position measurement in machinery condition monitoring applications. Features Eddy current technology: Measures distance between the probe tip and a conductive surface for both static (position) and dynamic (vibration) values. 8mm probe diameter: Suitable

Product:330750-60-05 Bently Nevada MCM 330750-60 High Temperature Velomitor Sensor Product description: 330750 High Temperature Velomitor System sensor head and integral cable are designed for high temperature environments. The sensing head can be mounted on surfaces with temperatures up to 752°F (400°C), making it suitable for high-temperature environments. Sensitivity: It has a sensitivity of 5.7 mV/mm/s (145 mV/in/s) ±5%. Frequency Response: 15 to 2000 Hz (900 to 120,000

Product: 87143-15 Bently Nevada High-Temperature Cables Description 87143-15 is used for Bently Nevada 9200 and 74712 Seismoprobe Velocity Transducers. 87143-15 has 2-wire shielded 18 AWG (1.0 mm2) cable with terminal lugs at each end. it can withstands 200°C(392°F). Minimum length of 3.0 ft (0.9 m); maximum length of 99 ft (30 m). 87143-15 is 4.5m cable length. Ordering Information: 87143-NN Recommended Products 330400-01-05 330400-02-05 330425-01-05 330425-02-05 330104-20

Product: 130539-30 Bently Nevada Interconnect Cables Description 130539-30 is used for Bently Nevada 330400 and 330425 Accelerometer Acceleration Transducers. 130539-30 has 3-conductor shielded 18 AWG (1.0 mm2) cable with 3-socket plug and fluorosilicone elastomer boot at one end, terminal lugs at the other end. Minimum length of 2.0 ft (0.6 m), maximum length of 99 ft (30 m). A manual is available to assist with installation of this cable (part number 133080-01). Ordering

Product: 330104-00-05-05-02-05 Bently Nevada 3300 XL 8 mm Proximity Probes Description 330104-00-05-05-02-05 is the Probe of Bently Nevada 3300 XL 8mm Proximity Transducer System. 330104-00-05-05-02-05 is M10 x 1 thread, with armor, total length is 0.5 meters, Miniature coaxial ClickLoc connector, standard cable. The probe tip is 8.0 mm diameter, 75Ω cable, 3.68 mm (0.145 in) maximum outside diameter, 3.94 mm (0.155 in) maximum outside diameter for FluidLoc cable, 7.67 mm (0

Product:Bently Nevada 16710-04 Interconnect Cables with Armored cable 16710-04 is Bently Nevada Interconnect Cables for 330400 and 330425. 16710-04 with armored cable, total cable length 4 ft. It is 3-conductor shielded 22 AWG (0.5 mm2) armored cable with 3-socket plug at one end, terminal lugs at the other end. Minimum length of 3.0 ft (0.9 m), maximum length of 99 ft (30 m). Ordering Information 16710-AA A: Cable Length Option in feet Recommended Products: 16710-04 16710-30

Product: Bently Nevada 330425-01-05 Accelerometer Acceleration Transducers in stock now Description Bently Nevada 330425-01-05 Accelerometer Acceleration Transducers manufactured and designed by Bently Nevada original factory. These accelerometers are intended for critical machinery applications where casing acceleration measurements are required, such as gear mesh monitoring. The 330400 is designed to address the requirements of American Petroleum Institute Standard 670 for

Product: Bently Nevada 330425-02-05 Accelerometer Acceleration Transducers in stock now Description Bently Nevada 330425-02-05 Accelerometer Acceleration Transducers manufactured and designed by Bently Nevada original factory. These accelerometers are intended for critical machinery applications where casing acceleration measurements are required, such as gear mesh monitoring. The 330400 is designed to address the requirements of American Petroleum Institute Standard 670 for

Product: Bently Nevada 330400-02-05 Accelerometer Acceleration Transducers in stock now Description Bently Nevada 330400-02-05 Accelerometer Acceleration Transducers manufactured and designed by Bently Nevada original factory. These accelerometers are intended for critical machinery applications where casing acceleration measurements are required, such as gear mesh monitoring. The 330400 is designed to address the requirements of American Petroleum Institute Standard 670 for

Product: Bently Nevada 330400-02-00 Accelerometer Acceleration Transducers in stock now Description Bently Nevada 330400-02-00 Accelerometer Acceleration Transducers manufactured and designed by Bently Nevada original factory. These accelerometers are intended for critical machinery applications where casing acceleration measurements are required, such as gear mesh monitoring. The 330400 is designed to address the requirements of American Petroleum Institute Standard 670 for

Product: Bently Nevada 330400-01-05 Accelerometer Acceleration Transducers in stock now Description Bently Nevada 330400-01-05 Accelerometer Acceleration Transducers manufactured and designed by Bently Nevada original factory. These accelerometers are intended for critical machinery applications where casing acceleration measurements are required, such as gear mesh monitoring. The 330400 is designed to address the requirements of American Petroleum Institute Standard 670 for

Product: Bently Nevada 330851-02-000-056-90-00-05 3300 XL 25mm Proximity Transducer in stock now Description The 3300 XL 25 mm Transducer System consists of a separate 25 mm probe, an extension cable, and a 3300 XL 25 mm Proximitor Sensor. The 0.787 V/mm (20 mV/mil) output gives this system a linear range of 12.7 mm (500 mils). Based on this linear range, the 3300 XL 25 mm Transducer System is suitable for measuring differential expansion (DE) on mid-size to large steam

Product: Bently Nevada 330101-00-58-10-02-00 3300 XL 8 mm Proximity Probes in stock now Description 330101-00-58-10-02-00 is a 3300 XL 8 mm Proximity Probe manufactured by Bently Nevada. Additionally, the 3300 XL probe and extension cable represent advancements over earlier models. The bond between the probe tip and the probe body is stronger thanks to a unique TipLoc molding process. In order to more firmly attach the probe cable and probe tip, the probe's cable features a

Product: Bently Nevada 330101-00-54-10-02-00 3300 XL 8 mm Proximity Probes in stock now Description The Bently Nevada 330101-00-54-10-02-00 is a component of the 3300 XL 8mm Proximity Transducer System, designed to provide precise measurement of vibration and position in industrial machinery. The system includes a probe, an extension cable, and a Proximitor Sensor. The system generates an output voltage that is exactly proportional to the distance between the probe tip and

Product: Bently Nevada 330171-00-26-10-02-00 3300 5 mm Proximity Probes in stock now Description The 3300 5 mm Proximity Transducer System consists of: a 3300 5 mm probe 1, 2 a 3300 XL extension cable (ref 141194-01) a 3300 XL Proximitor Sensor 3, 4, 5 (ref 141194-01) When combined with a 3300 XL Proximitor Sensor and XL extension cable, the system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive

Product: Bently Nevada 330171-00-40-10-02-00 3300 5 mm Proximity Probes in stock now Description The 3300 5 mm Proximity Transducer System consists of: l a 3300 5 mm probe 1, 2 l a 3300 XL extension cable (ref 141194-01) l a 3300 XL Proximitor Sensor 3, 4, 5 (ref 141194-01) When combined with a 3300 XL Proximitor Sensor and XL extension cable, the system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive

Product: Bently Nevada 330703-000-040-90-02-CN 3300 XL 11 mm Proximity Probes 330703-000-040-90-02-05 in stock now Description The 3300 XL 11 mm Proximity Transducer System has a 3.94 V/mm (100 mV/mil) output for non-contacting vibration and displacement measurements on fluid film bearing machines. The large 11 mm tip enables this transducer system to have a longer linear range compared to our standard 3300 XL 8 mm Transducer System. It is primarily used in the following

Product: Bently Nevada 330703-000-080-10-02-00 3300 XL 11 mm Proximity Probes 330703-00-80-10-02-00 in stock now Description The 3300 XL 11 mm Proximity Transducer System has a 3.94 V/mm (100 mV/mil) output for non-contacting vibration and displacement measurements on fluid film bearing machines. The large 11 mm tip enables this transducer system to have a longer linear range compared to our standard 3300 XL 8 mm Transducer System. It is primarily used in the following

Product: Bently Nevada 330190-040-01-00 Extended Temperature Range Extension Cable in stock now Description 330190-040-01-00 is a 3300 XL 8 mm Proximity Probe manufactured by Bently Nevada. Additionally, the 3300 XL probe and extension cable represent advancements over earlier models. The bond between the probe tip and the probe body is stronger thanks to a unique TipLoc molding process. In order to more firmly attach the probe cable and probe tip, the probe's cable features