Condensate Polishing Filter

General Description PHFX Series String WIund Filter Cartridge is a wounded type depth filter. It has excellent high dirt holding capacity and wide chemical compatibility, are a good choice for prefiltration/clarification and the protection of membrane filters to expand their service life. are widely used in power station condensate water filtration. Performance Specifications Dimensions OD

Thermal Power Plant String Wound Filter Replace PALL GRAVER Backwashable Filter Element General Description PHFX Series String Wound Filter Cartridge is depth filtration type, with different precision and end connections can meet different conditions. Effectively remove suspended solids in the fluid, particulates, rust and other debris, widely used for iron removal in condensate water treatment. Performance Specifications Dimensions(nominal): OD 50mm, 60mm ID 25mm, 28mm

Performance Specifications Material Filter Medium Polypropylene Center Core Reinforced Polypropylene Dimensions Outside Diameter 65mm, 69mm, 70mm Length 70"; Customized on request Connection thread size 1 1/2"-12, M33x1.5; (Customized on request) Screw size M6, M8, M10, 3/8; (Customized on request) Filter Performance Micron 1um, 5um(operating filter), 10um(start-up filter) Filter area 6.5m² Max.

70" String Wound Filter For Condensate With Or Without Resin Precoat Backflushing General Description PHFX Series String WIund Filter Cartridge is a wounded type depth filter. Its filter media is contunuous wound fiber with high performances. The length of the cartridge is up to 70inch (1778mm), the large length with big filter media area insures to reduce the number of filter cartridges and the dimension of housing required. The long service life and high flow rate result in

2.7" Diameter 70" Length Backwash Replace Graver AEGIS Condensate Polishing Filters Iron Remove In Power Plant Application Pre-filter to prevent premature fouling of RO membranes; Used in boiler condensate for both nuclear and fossil plants, heat recovering steam generators, pre-RO and combined cycle plants. General Description PHFZ Series pleated filter cartridges use pleated type, use thermal welding, multi-backwashing, designed specifically for iron removal in condensate

Remove suspended solids in the fluid String wound filter cartridge use in power plants General Description PHFX Series String WIund Filter Cartridge is a wounded type depth filter. use of high-performandce fiber, according to a specific process, tightly wrapped on a porous skeleton, put an end to the fiber deformation and fiber shedding, It has excellent high dirt holding capacity and wide chemical compatibility, are a good choice for prefiltration/clarification and the

CPU Elements to Replace PALL PPB series Backflushable Filter Cartridge for Sediment Power Plant General Description PHFZ Series pleated filter cartridges use PP pleated type, thermal melting welding, multiple times backwashing, designed for iron removal in condensate water of power generation. Different precisions used as Start-up and operating filter elements. Its structure can be divided into three types: 7 parts, 2 parts and 4 parts. The 2parts type is welded of 40" and 30

Material Polypropylene Micron 1um-5um RO applicaiton prefiltration PHFX Series String Wound Filter Cartridge PHFX series string wound filter cartridge is depth filter, using high-performance fiber (Polypropylene, Absorbent cotton or Glass fiber) thread according to a specific process, tightly wound on the porous center core (PP or SS hole tube), form a honeycomb structure with sparse outside and dense inside. It’s designed for power plant condensate iron removal, use with or

Backflushable Condensate Polishing Filter 70" Pleated Used In Condensate With Or Without Resin Precoat General Description PHFZ Series pleated filter cartridges use pleated type, all connection use thermal welding, multi-backwashing, designed specifically for iron removal in condensate water of power generation. Different precisions used as start-up and operating filter elements. Performance Specifications Material Filter Medium Polypropylene Center Core Reinforced Polypropyl

Thermal Power Plant Condensate Filter Iron Remove Backflushing PP Pleated Filter Element General Description PHFZ Series pleated filter cartridges use pleated type, all connection use thermal welding, multi-backwashing, designed specifically for iron removal in condensate water of power generation. Different precisions used as start-up and operating filter elements. Specifications Micron 1um, 5um(operating filter), 10um(start-up filter) Filter area 6.5m² Max. Operating

Performance Specifications Dimensions(nominal): OD 50mm, 60mm ID 25mm, 28mm Length 70"(1778mm), 60" (1524mm) Parts Material Filter Media Polypropylene, Cotton, Glass Fiber Support Core Stainless steel 304/316 Filter Performance Micron 1um, 5um(operating filter), 10um ( start-up filter) Max. Operating temperature 85℃ Max. Operating differential pressure 2.45Bar Design Flow Rate 2.9m³/h-3.2m³/h

Application Pre-filter to prevent premature fouling of RO membranes; Used in boiler condensate for both nuclear and fossil plants, heat recovering steam generators, pre-RO and combined cycle plants. Specifications Micron 1um, 5um(operating filter), 10um(start-up filter) Filter area 6.5m² Max. Operating Temperature 85℃ Max. Operating Differential Pressure 2.8bar, 65℃ Design Flow Rate 3.9m³/h

CoalFired Power Plant Condensate Polishing Filter Element For Iron Remove Backwashable PP Pleated Filter General Description PHFZ Series pleated filter cartridges use pleated type, thermal melting welding, multiple times backwashing, designed for iron removal in condensate water of power generation. Different precisions used as Start-up and operating filter elements. Its structure can be divided into three types: 7 parts, 2 parts and 4 parts. The 2parts type is welded of 40"

General Description PHFX Series String Wound Filter Cartridge is depth filtration type, made of stainless steel core, with yarn (polypropylene, cotton, glass fiber) according to a specific process, tightly wrapped on the porous stainless steel core, formed loose outer layers and tight inner layers structure, which can effectively filter suspended solids, rust, particles and

Performance Specifications Material Filter Medium Polypropylene Center Core Reinforced Polypropylene Dimensions Outside Diameter 65mm, 69mm, 70mm Length 70"; Customized on request Connection thread size 1 1/2"-12, M33x1.5; (Customized on request) Screw size M6, M8, M10, 3/8; (Customized on request) Filter Performance Micron 1um, 5um(operating filter), 10um(start-up filter) Filter area 6.5m²

General Description PHFX Series String Wound Filter Cartridge is depth filtration type, made of stainless steel core, with yarn (polypropylene, cotton, glass fiber) according to a specific process, tightly wrapped on the porous stainless steel core, formed loose outer layers and tight inner layers structure, which can effectively filter suspended solids, rust, particles

Iron Removal In Power Plant Resin Precoat Backwashable 70" Condensate Polishing Filter String Wound Filter General Description PHFX Series String Wound Filter Cartridge is depth filtration type, with different precision and end connections can meet different conditions. Effectively remove suspended solids in the fluid, particulates, rust and other debris, widely used for iron removal in condensate water treatment. Performance Specifications Dimensions OD 50mm, 60mm;

Performance Specifications Material Filter Medium Polypropylene Center Core Reinforced Polypropylene Dimensions Outside Diameter 65mm, 69mm, 70mm Length 70"; Customized on request Connection thread size 1 1/2"-12, M33x1.5; (Customized on request) Screw size M6, M8, M10, 3/8; (Customized on request) Filter Performance Micron 1um, 5um(operating filter), 10um(start-up filter) Filter

PHFZ Series condensate polishing filters are pleated type, thermal welding, backwashable, designed specifically for iron removal in condensate water of power generation. Different precisions used as start-up and operating filter elements. Specifications Micron 1um, 5um(operating filter), 10um(start-up filter) Filter area 6.5m² Max. Operating Temperature 85℃ Max.

PHFX Condensate Polishing Filter for Industrial Steam Systems High-efficiency Condensate Polishing Filter with 6.5㎡ filter area, polypropylene material, and 1μm, 4μm, 10μm filter rating for industrial steam systems. Product Overview Our Condensate Polisher is made with high-quality polypropylene filter material, providing excellent chemical and thermal stability. With a filter area of 6.5㎡, it is capable of effectively removing even the finest particles from your condensate