Seamless Boiler Tube

Prdouct Name: ASTM A210 Seamless Medium Carbon Steel Boiler Tube for SuperheatersMaterial: A-1, CApplication: For High pressure boilerSize(mm): O. D.: 10-156mm W. T.: 1-20mm L: Max 12000mm Quality Control:1. Incoming Raw Material Inspection2. Raw Material Segregation to avoid steel grade mix-up3. Heating and Hammering End for Cold Drawing4. Cold Drawing or Cold Rolling, On line inspection5. Heat Treatment6. Straightening/Cutting to specified length/Finished Measuring

19.05*2.11MM SEAMLESS COLD DRAWN HEAT EXCHANGER TUBES A213 T5 Size Range: OD: 6-127mm, WT: 1-12.7mm, Length: 5.8m/6m, maximal 11.8m Stable Quality with Comeptitive Price High Performance and Longer Working Life Steel Pipe Product Name Seamless Alloy Steel Boiler Tube ASTM A213 Material T5 T9 T11 T12 T91 T92 Standard ASTM A213 Seamless Steel Tube Application Boiler, Superheater, heat exchanger Certificate ISO 9001 HS code 7304319000 Delivery Time 45 days Pakcing Bundles or

ASME SA-178/SA-178M ELECTRIC-RESISTANCE WELDED CARBON STEEL PIPES Seamless STEEL BOILER TUBES/SUPERHEATER TUBES/ERW STEEL PIPES ASME A178/A178M ELECTRIC-RESISTANCE WELDED BOILER TUBES/ERW ROUND BOILER TUBING/BENDING TUBES 1.This specification covers minimum-wallthickness,electric-resistance-welded tubes made of carbon steel and carbon-manganese steel intended for use as boiler tubes, boiler flues, superheater flues, and safe ends. 2.The tubing sizes and thicknesses usually

Seamless Low-Carbon Steel Heat-exchanger tubes/condenser tubes/boiler tubes/Seamless Cold Drawn Steel Pipes/U-Bending tubes/U-Tubes/Bending tubes The steel tubes produced by cold drawn process according to the Norm of ASTM A179/A179MASME SA179/SA179M mainly used for Heat-exchanger,boiler,condenser,superheater etc.1.This specification covers minimum-wall-thickness,seamless cold-drawn low-carbon steel tubes for tubularheat exchangers, condensers tubes, and similar heat transfer

25.4x1.65mm 19.05x1.65mmS32760 S31803 S32750 S31500 ASTM A789 A789M Seamless Ferritic Austenitic Stainless Steel Tubing 1. Scope This specification covers grades of nominal wall thickness, stainless steel tubing for services requiring general corrosion resistance, with particular emphasis on resistance to stress corrosion cracking. These steels are susceptible to embrittlement if used for prolonged periods at elevated temperatures. The values stated in either SI units or inch

1. Product Name: ASTM A179 / SA179 Cold Drawn Seamless Carbon Heat Exchanger and Condenser Steel Tube 2. Size Range: OD: 3.2-76.2mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. High Preformance and Longer Working Life Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5. Heat

Prdouct Name: GB5310 20G 20MnG 12Cr1MoVG Seamless Steel Tubes and Pipes for High Pressure Boiler Standard: GB 5310 Material: 12Cr1Mo1VG,20G,12CrMoG,15CrMoG,etc. Application: For High pressure boiler Size(mm): O. D.: 8-256mm W. T.: 1-35mm L: Max 12000mm 16*2.5mm, 16*3mm, 38*5mm, etc Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line

High Pressure Purpose Seamless Steel Boiler Tube P195GH BS EN 10216-2 High Quality Seamless Steel Tubes for Pressure Purpose BS EN 10216-2 Size Range: OD: 10-256mm, WT: 1-30mm, Length: 5.8m/6m, maximal 11.8m Stable Quality with Comeptitive Price 100% Eddy Current Testing. 100% Size Tolerance Checking. 100% Tube surface checking to avoid surface defects. Product Name EN10216-2 Seamless Boiler Tube for Pressure Purpose Material P195GH P235GH P265GH 16Mo3 Delivery Condition +N,

SA334 Seamless and Welded Carbon and Alloy Steel Tubes for Low Temperature Service Gr1, Gr3,Gr6, Gr8,Gr11 etc Product Name SA334 Low Temperature Service Steel Tubes Material Gr1, Gr6, Gr8 etc Delivery Condition Heat Treatment Standard ASTM A334 Application Boiler, Heat Exchanger, Condensers and similar heat transfer apparatus Certificate ISO 9001 HS code 7304319000 Delivery Time 45 days Packing Bundles or Wooden Boxes The pipes are made by seamless or automatic welding

ASME SA-179/SA-179M Seamless Cold-Drawn Low-Carbon Steel Heat-exchanger and condenser Tubes ASTM A179/A179M Seamless Cold Drawn Steel Tubes with U-Bending tubes according to customer drawing. 1.This specification covers minimum-wall-thickness,seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers tubes, and similar heat transfer apparatus. 2.This specification SA179/A179 covers seamless tubes 1⁄8 to 3 in. [3.2 to 76.2 mm], inclusive, in outside

32x2.5mm S31063 34.3x7mm 2205 ASTM A790/A790M S31803 Duplex Seamless Stainless Steel Tubing,stainless heater tubes stainless boiler pipe Test relevant norm: A370 Test Methods and Definitions for Mechanical Testing of Steel Products A923 Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys A999/A999M Specification for General Requirements

63.5x3.2mm 2.1/2" 50.8x3.2mm 2" as DIN17175 Grade St35.8 Carbon Steel seamless boier tubes seamless boiler steel pipes Application: DIN17175 Steel Tubes are used in the construction of chemical plant, vessels, pipework and for general mechanical engineering purpose. 100% Eddy Current Testing. 100% Size Tolerance Checking. 100% Tube surface checking to avoid surface defects. Size Range: OD: 6-154mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Stable Quality with Comeptitive

1. Product Name: EN10216-2 Seamless Carbon and Alloy Steel Tubes with Specified Elevated Temperature Properties 2. Size Range: OD: 10-256mm, WT: 1-30mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price Your special requirement is highly welcomed and will be fulfilled. We always provide highest quality seamless pipe/tube and best service. 100% Eddy Current Testing. 100% Size Tolerance Checking. 100% Tube surface checking to avoid surface defects. Product

ASTM A213 T9 T11 T12 T91 T92 Seamless Boiler Steel Tubes for Superheater​ Size Range: OD: 12.7-114mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Stable Quality with Comeptitive Price High Performance and Longer Working Life Steel Pipe 100% Eddy Current Testing. 100% Size Tolerance Checking. 100% Tube surface checking to avoid surface defects. Product Name Seamless Cold Drawn Alloy Steel Tube ASTM A213 Material T9 T11 T12 T91 T92 Standard ASTM A213 Seamless Steel Tube

ASTM A334 Gr1, Gr6, Gr8 Seamless and Welded Carbon and Alloy Steel Tubes for Low Temperature Service Product Name ASTM A334 Low Temperature Service Steel Tubes Material Gr1, Gr6, Gr8 etc Delivery Condition Heat Treatment Standard ASTM A334 Application Boiler, Heat Exchanger, Condensers and similar heat transfer apparatus Certificate ISO 9001 HS code 7304319000 Delivery Time 45 days Packing Bundles or Wooden Boxes The pipes are made by seamless or automatic welding process

Seamless Low Alloy Steel Pipe for Pressure Containing Parts ASTM A423 Gr1 , Gr2 , Gr3 Material: gr 1, gr 2, gr 3 Size Range: OD: 12.7-127mm, WT: 1-12.7mm, Length: 5.8m/6m, maximal 11.8m Product Name ASTM A423 Seamless Low Alloy Steel Tubes Material Gr 1, Gr 2, Gr 3 Delivery Condition Normalized Standard ASTM A423 Size Range OD: 12.7-127mm, WT: 1-12.7mm Application Pressure containing parts Round Billet Bao Steel, Xingcheng Steel, Huai Steel, Zhongtian Steel Keyword Low alloy

ASTM A213 T11 T12 T22 Seamless Alloy Steel Boiler , Superheater and Heat Exchanger Tubes Size Range: OD: 6-127mm, WT: 1-12.7mm, Length: 5.8m/6m, maximal 11.8m Stable Quality with Comeptitive Price High Performance and Longer Working Life Steel Pipe Product Name Seamless Alloy Steel Boiler Tube ASTM A213 Material T9 T11 T12 T91 T92 Standard ASTM A213 Seamless Steel Tube Application Boiler, Superheater, heat exchanger Certificate ISO 9001 HS code 7304319000 Delivery Time 45

76x2.9 38.1x2.9 seamless carbon Steel pipes as DIN17175 SA192 high pressure boiler steel tubes length max 12meters Size Range: OD: 6-154mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Stable Quality with Comeptitive Price High Performance and Longer Working Life Steel Pipe Application: DIN17175 Steel Tubes are used in the construction of chemical plant, vessels, pipework and for general mechanical engineering purpose. 100% Eddy Current Testing. 100% Size Tolerance Checking.

T22 10CrMo910 STBA24 T5 T91 T92 Alloy steel tubes for high pressure boiler application as ASME SA-213 SA-269 Reference Documents: ASTM A262 Practices for Detecting Susceptibility to Intergranular Attach In Austenitic Stainless Steels ASTM A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroallys ASTM A1016/A 1016M Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes E112 Test Methods for

SA-213T22 T11 T91 T92 10CrMo910 STBA24 Alloy steel tubes for high pressure boiler application Size Range: OD: 12.7-114mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Stable Quality with Comeptitive Price High Performance and Longer Working Life Steel Pipe 100% Eddy Current Testing. 100% Size Tolerance Checking. 100% Tube surface checking to avoid surface defects. Alloy Steel Pipe Heat-Exchanger Tubes SA213 Steel Grades Chemical Composition and Mechanical Properties: Steel