PTFE Valve Seat

PTFE, Conductive PTFE+EPDM, UHMWPE seat for centerlined ( Wafer, Lug) butterfly valve 2'-24' PTFE+EPDM The (PTFE) liner overlays EPDM which is bonded to a rigid phenolic ring on the outside seat perimeter. The PTFE extends over the seat faces and outsides flange seal diameter, completely covering the EPDM elastomer layer of the seat, which provides the resilience for sealing valve stems and the closed disc. Temperature range: -10°C to 150°C. Color: white Applications

PTFE+EPDM compounded rubber valve seat with high temperature resistance PTFE+EPDM compounded rubber valve seats produced by SML are widely used in textile, power station, petrochemical, heating and refrigeration, pharmaceutical, shipbuilding, metallurgy, light industry, environmental protection and other fields. Product Performance: 1. high temperature resistance 2. good acid and alkali resistance 3. oil resistance 4. with good rebound resilience 5. good sturdy and durable

PTFE Coated EPDM valve seat for resilient seat butterfly valve 2'-24'​ 1. A butterfly valve seat is a type of flow control devise, typically used to regulate o fluid flowing through a section of pipe. 2. Rubber Valve seats are used in Butterfly valves for sealing purpose. The material of the seat can be made from many different elastomers or polymers, including PTFE, NBR, EPDM, FKM/FPM, etc. 3. This PTFE&EPDM valve seat is used for butterfly valve seat with excellent non-stick

Full PTFE lined valve seat for wafer/ lugged / flange butterfly valve 2'-24' Suitable for acid and alkali working conditions. Materials:PTFE Color: customized Hardness:customized Size:according to needs Applied Medium: Excellent resistance to chemical corrosion , with outstanding heat and cold resistance and wear resistance, but also has excellent electrical insulation, and not affected by temperature and frequency. Widely used in textiles, power plants, petrochemical,

Zero Leakage PTFE Valve Seat Butterfly Valve Parts DN50 - DN600 Virgin PTFE (Polytetrafluoroethylene) PTFE () is a fluorocarbon based polymer and typically is the most chemically resistant of all plastics, while retaining excellent thermal and electrical insulation properties. PTFE also has a low coefficient of friction so it is ideal for many low torque applications. This material is non-contaminating and accepted by the FDA for food applications. Although the

PTFE bonded with EPDM Valve Seat For Centerline Butterfly Valve 2 -24' A PTFE+EPDM butterfly valve seat is a valve seat material made of a mixture of polytetrafluoroethylene (PTFE) and ethylene propylene diene monomer (EPDM). It has the following performance and size descriptions: Performance Description: Excellent chemical corrosion resistance, able to withstand various corrosive media; Strong wear resistance, able to maintain its shape and performance even under high-stress

PTFE + FPM valve seat for resilient seat butterfly valve 2'-24' Rubber seat Dimensions (Unit:lnch/mm) Inch 1.5“ 2“ 2.5“ 3“ 4“ 5“ 6“ 8“ 10“ 12“ 14“ 16“ 18“ 20“ 24“ 28“ 32“ 36“ 40“ DN 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 Materials:PTFE+FPM Color: Green & Black Hardness:65±3 Size:2'-24' Applied Medium: Excellent resistance to chemical corrosion , with outstanding heat and cold resistance and wear resistance, but also has excellent electrical

PTFE Coated EPDM valve seat for resilient seat butterfly valve 2'-24'​ Rubber seat Dimensions (Unit:lnch/mm) Inch 1.5“ 2“ 2.5“ 3“ 4“ 5“ 6“ 8“ 10“ 12“ 14“ 16“ 18“ 20“ 24“ 28“ 32“ 36“ 40“ DN 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 Materials:PTFE+EPDM Color: Green & Black Hardness:65±3 Size:2'-24' Applied Medium: Excellent resistance to chemical corrosion , with outstanding heat and cold resistance and wear resistance, but also has excellent

PTFE rubber seat for wafer / lug / flanged centerlined butterfly valve 2'-24' Since 2013, Suzhou Meilong Rubber & Plastic Products Co., Ltd, with its self-developed formula of the rubbers, has obtained the German KTW, W270, British WRAS, US NSF61/372, French ACS and other water treatment industry international certifications, as well as the FDA and domestic drinking water related regulations. Our main production lines are: all kinds of rubber valve seat for concentric

PTFE valve gasket for wafer/ lug/ lever butterfly valve 2'-24' Suitable for acid and alkali working conditions. Materials:PTFE Color: customized Hardness:customized Size:according to needs Applied Medium: Excellent resistance to chemical corrosion , with outstanding heat and cold resistance and wear resistance, but also has excellent electrical insulation, and not affected by temperature and frequency. Widely used in textiles, power plants, petrochemical, pharmaceutical,

PTFE & FKM bonded valve gasket for concentric butterfly valve 2'-24' Materials:PTFE+FKM Color: customized Hardness:customized Size:2'-24' Applied Medium: Excellent resistance to chemical corrosion , with outstanding heat and cold resistance and wear resistance, but also has excellent electrical insulation, and not affected by temperature and frequency. Widely used in textiles, power plants, petrochemical, pharmaceutical, shipbuilding, and other fields. Temperature:-20°~150°

PTFE & FPM valve seat for resilient seat butterfly valve 2'-24' EPDM+FPM Advantages: 1. replace pure PTFE sealing ring 2. reduce cost and improve torque by using rubber elasticity. Description: 1. A butterfly valve seat is a type of flow control devise, typically used to regulate o fluid flowing through a section of pipe. 2. Rubber Valve seats are used in Butterfly valves for sealing purpose. The material of the seat can be made from many different elastomers or polymers,

Black/ Green PTFE/ FPM +EPDM Rubber Valve Seat for Butterfly Valve Seat PTFE + EPDM compounded rubber valve seats produced by SML are widely used in textile, power station, petrochemical, heating and refrigeration, pharmaceutical, shipbuilding, metallurgy, light industry, environmental protection and other fields. Product performance: high temperature resistance, good acid and alkali resistance and oil resistance; with good rebound resilience, sturdy and durable without

PTFE + FKM valve seat for wafer butterfly valve 2'-24' 1. A butterfly valve seat is a type of flow control devise, typically used to regulate o fluid flowing through a section of pipe. 2. Rubber Valve seats are used in Butterfly valves for sealing purpose. The material of the seat can be made from many different elastomers or polymers, including PTFE, FKM, NBR, EPDM, FKM/FPM, etc. 3. This PTFE&FKM valve seat is used for butterfly valve seat with excellent non-stick characterist