Test Equipment For Electric Lab

High Voltage Insulation Flash Tester Product overview: ■Meet the test requirements of general electrical safety standards such as IEC 60884-1:2013 clause 17, etc ■ Up to 100 groups of test condition memory, model of each group can be set, easy to find, test data can be saved via USB(optional) ■ Voltage ramp-up and ramp-down functions to meet the requirements of new industry standards; ■ Breakdown current upper and lower limit preset, intelligent judgment; ■ Digital closed

Automatic Voltage Stabilizer (Three Phase) Product information: Nominal input voltage:3-phase 400V, 50Hz Input voltage swing: ±15%KVA, 50KVA Output voltage accuracy of nominal: ±1% Coil: Pure copper main coil, aluminum Compensation Wire Package Carbon brush: 1017 carbon brush Dimensions: approx. W 550*D 450*H 1045mm Weight: Approx. 155KG

Glow Wire Test Apparatus Included “inner, Build-in” Fume Hood Product overview: This device is manufactured according to the standard of IEC60695-2-10, IEC 60695-2-11, IEC 60695-2-12, IEC60695-2-13, UL746A, IEC 60335, IEC 60598, etc. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in s short time. It is suitable for electric and

Optical Measuring Instrument Product overview: This PEAK 1983 series optical measuring instrument is with coated optical lens, the image is transparent and clear. And it with a variety of scale measurement, measurement more plus precision, a wide range of uses. Model for selection: Model: PEAK 1983-10X Magnification: Standard 10X Scale type: NO.1/NO.2/NO.13 (choose one of it, please state which one is needed before placing order) Minimum scale (div.): 0.1mm Max. measurement

Test Probe 11 with Dynamometer 75N Standards: Standard:it is designed and made according to IEC 61032 Figure 7, required by many standards such as IEC 60884-1:2013, IEC 60669-1: 2017, IEC 60335-1:2020, etc. Application:It is used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or internal barriers. Test sample:Electrical outlet or similar electrical appliances and other hazardous live

IEC 60335-2-107 Adult and Child Foot Probes for Robotic Lawn Mower Safety Protection Testing Product Overview: This series of standardized foot-shaped test probes is designed for safety verification of battery-powered household robotic lawn mowers, specifically to assess the effectiveness of enclosure protection for the cutting mechanism against access by feet in different human postures. The probes are manufactured strictly in accordance with relevant GB and IEC standards,

IEC 60335-2-107 Foot Probe For Robotic Battery Powered Electrical Lawnmowers Product Information For Foot Probe: Samples and restrictions Smart lawn mower powered by battery Application Use it to simulate the protection of battery-powered smart lawn mowers to verify the shell protection capabilities of the smart lawn mower and ensure its safety performance Test principle Made according to standard size of figure Equipment structure Made of nylon material Standards For Foot

IEC 60335-2 Rigid Finger Test Probe 11 With Force 50N Product Information For Rigid Finger Test Probe 11: This rigid finger probe conforms to the standard requirement of IEC IEC60335-2-6 clause 22, IEC60335-2-9 clause 22, IEC61032 figure 7 device 11, IEC60884-1, IEC60598-1, IEC60335-1 Clause 22.11, etc. It is used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or internal barriers.

IEC 60335-2-92 Foot Probe For Testing The Stability Of Appliances With Foot Control Product Information For Foot Probe: The IEC 60335-2-92 is a safety standard for household and similar electrical appliances Fig 103 refers to a specific type of foot probe used in testing the stability of appliances that have a foot control, such as sewing machines or vacuum cleaners. Overall, the foot probe is an important tool in ensuring the safety and stability of household electrical

Gauge for Checking Non-accessibility of Live Parts, Through Shutter Product information: These two test probes separately confirm to the IEC 60884-1:2013 clause 10.5, figure 9 and figure 10. The SN2110 test probe with 20N force is used to test whether the live parts inside can be touched. The SN2110-A test probe with 1N force is for testing whether the live parts with the protection of socket can be touched. Technical parameters: 1. Test probe with force of 20N SN2110: The

Spanner with Torque Meter (0.2~2.5Nm) Product overview: High accuracy, light weight, easy to read scale. Since the dial is movable, the pointer can be adjusted to the required torque first, and then the tightening is completed when the pointer points to "0". Model for selection:

Screwdriver with Torque Meters (0.2~2.5Nm) Product overview: The screwdriver with torque meters are required by IEC 60335-1 & IEC 60884-1, etc. High precision, simple operation, wear-resistant and durable, clear reading, high-quality bits. Preheat value,buzzer alarm, sound reminder to prevent overload. Switch between four units:kgf.cm, N.m, lbf.ft, lbf.in. Three measurement modes: Track Mode/ Preset Mode /Peak Mode. Accuracy value: bidirectional 2%. Model for selection: Model

a-Ball Pressure Test Apparatus Product information: The Ball Pressure Tester conforms to many standard requirements like IEC 60335-1 clause 30 & IEC 60695-10-2, etc. It is used for testing the heat resistance of the electrical enclosure and external parts which are made up with the insulating materials. It is applicable to electrotechnical equipment and its subassemblies and components. It is also used for solid electrical insulating materials except ceramics. In this test, a

Tumbling Barrel Product information: Standard: According to IEC 60884-1:2013 Clause 24.2 and procedure 2 of IEC 60068-2-31. Application: This device is suitable for test the drop resistance of plugs and socket-outlets, surface type mounting boxes, screw glands, gland covers, switch and other electrical accessories. Test sample: plugs and socket-outlets, surface type mounting boxes, screw glands, gland covers, switch and other electrical accessories. Feature: This tester can

Gauges Product Information: These measuring gauges confirm to the standard of IEC 60884-1:2013 clause 9, BS1363-1, BS 1363-2 and BS 546, which are used for the dimensional measurement and verification of the plug socket for household and similar use. The specific measuring gauges are made according to following: Serial No. Name Figure No. Standard Quantity a Go Gauge for Socket-Outlet Figure 11 BS 1363-2 2 b Contact Test Gauge Figure 12 BS 1363-2 2 c Non-Contact Test Gauge

Apparatus for Abrasion Test on Insulating Sleeves of Plug Pin Product Information: The test apparatus is designed and manufactured according to the standard requirement of IEC 60884-1:2013 clause 24 Figure 28. It is used to test the abrasion resistance of the insulating bushing of the bolt. This device comprises a horizontally disposed beam, which is pivoted about its centre point. A short length of steel wire, 1 mm in diameter and bent into a U-shape, the base of the U being

Heating Oven (Natural Convection Oven) Product overview: This device is required by IEC 60884-1:2013 clause 16.1, IEC 60669-1;2007 clause 15.1, etc. It is used to perform thermal aging test to polymer materials (plastics, plastics and electrical insulating materials such as: wire and cable sheathing, heat shrinkable tube, rubber test or PVC materials, and the insulating components, or use for drying, baking, heat treatment and so on. Feature: 1. Adopts to microcomputer

Test Probe B Standards: This is a precision test finger made in accordance with IEC 61032 figure 2, required by many standards such as IEC60884, IEC60335, UL507, and UL1278 figure 8.4, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe consists of ditto, finger, base and insulated handle which simulates the characteristics of the human hand.

Apparatus For Breaking Capacity And Normal Operation Test Product overview: The test equipment has 3 synchronously work stations, which can test 3 plugs or 3 sockets at the same time. The equipment will automatically stop and alarm if one of the stations in abnormal running. This device complies with standard terms of IEC 60884-1: 2013 clause 20, 21, figure 16. Working together with load cabinet (optional, not included in this apparatus), can achieve making and breaking

Push and Pull Dynamometer Standards: This device is required by IEC 60335-1 & IEC 60884-1 and etc. Feature: 1. High precision and high resolution; 2. Five test modes, three display modes to choose from - to maximize test efficiency; 3. kg (kg), lb (list), N (Newton) three measurement units are available for selection and mutual conversion; 4. Gravity acceleration value setting function---The user can input the exact value of gravity acceleration of the place of use. Make