Led Testing Equipment

Lamp Holders Rotational Torque Test Apparatus For Screwed Luminaires IEC 60598-1 Standards For Lamp Holders Rotational Torque Test Apparatus: IEC 60598-1:2014 “Luminaries-Part1: General requirements and tests” clause 4.12.4 Technical Parameters For Lamp Holders Rotational Torque Test Apparatus: Torque Display Digital display, torque range: 0-10N.m, with maximum torque hold function, upper limit alarm can be set Lampholders Clamp The lampholder is fixed with the clamp,

IEC60598-1 Cord Anchorage Pull Force and Torque Test Apparatus Standards for Cord Anchorage Pull Force and Torque Test Apparatus: The test appliance conforms to IEC60598-1 clause 5.2.10.3, IEC60335-1 clause 25.15, etc. Application for Cord Anchorage Pull Force and Torque Test Apparatus: It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can process the pull force and torque testing. Technical Characteristics for Cord Anchorage Pull

IEC 60598-1 Strain Relief Test Apparatus For Strain Force Of Insertion Standards for Strain Relief Test Apparatus: This apparatus conforms to IEC 60335-1 clause 22.3, IEC60065:2014 clause 15.4.1 and figure 11, IEC 60884-1 2013 clause 14.23.2, IEC60065 clause 15.4.1 and figure 11, etc. Application for Strain Relief Test Apparatus: This device is used to check the torque applied to the output socket after the device with the plug inserted into the fixed output socket is

IEC 60598-1 PLC Controller Thermal Enclosure For Luminaries Endurance Test Overview: The luminaire durability aging test room meets the requirements of Section 12.3 of the Chapter 12 “Endurance Test” and Annex K “Temperature Measurement” of IEC60598-1:2014. This testing system has excellent cost performance, long-term operating temperature stability, high precision test data, good test results, highly recommended by lighting manufacturers, quality and technology supervision

IEC 60598-1 Luminaries Adjusting Devices 360° Movement PLC Control Test Apparatus Product information: The test equipment is designed and manufactured according to clause 4.14.3 of IEC 60598-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the table lamps, floor lamps and the lamps which are for professional use (such as a plotter lamps). To verify adjusting devices or means of adjustment, for example joints, hoisting devices, adjusting brackets

IEC60598 Lamps And Lanterns Of High And Low Temperature Durability Test Chamber Product overview: This test chamber conforms to IEC 60598-1: 2014 clause 12.3 and etc. Specimen Limitation: Flammable, explosive, volatile substances Corrosive substances Biological specimens Electromagnetic emission source Technical Parameters: Name Lamps and lanterns of high and low temperature durability test chamber Nominal volume 864L Power capacity 8.5kW Internal dimensions W3000xD2400xH2500