Led Testing Equipment

Standard & Clause: The Tumbling Barrel Free Fall Test Machine conforms to the standard of IEC60598-1: clause 4.13.6; IEC60884-1: clause 24.2; IEC60068-2-32; IEC60320-1clause 23.2; DIN VDE 0620-1; and BS1363-1-2012; and customer customized requirements. Application: This machine is used to perform free fall test for plugs and sockets, plug-in ballasts/transformers and power sockets installed lamps, non-rewireable

IEC60598 5 KW Large Led Lamp Testing Equipment Temperature Aging Room Overview: a) Inner chamber material: clean and thick flame-retardant color steel plate (the inner wall needs to be painted black) b) Outer chamber material: sprayed color steel plate c) Insulation material: thermal mineral wool d) Heater: good heat dissipation e) Refrigeration system: France TECUMSEH brand refrigeration compressor f) Provide high temperature / heat / corrosion resistant black floor The

IEC 60598-1 Screwed Glands Torque Test Apparatus with 1.5-30N.m Digital Spanner Standards & Clauses: IEC 60598-1:2014 “Luminaries-Part1: General requirements and tests” clause 4.12.5 Samples and Restrictions: Glands of screw thread ≦ M33 Application: Test the mechanical strength of the screwed glands Test Principle: Screwed gland is fitted with a cylindrical metal rod, one end is fixed, then test torque is applied on the other end by the spanner. Structure: Manual testing,

IEC 60598-1 Screwed Luminaires Lampholders Torque Test Apparatus Standards & Clauses: IEC 60598-1:2014 “Luminaries-Part1: General requirements and tests” clause 4.12.4 Samples and Restrictions: E10, E14and B15 (including candle type), E27, E26, B22, E40 lampholders Application: To test the influence of the rotational torque on the lampholders during the replacement of the light source. Test Principle: Adopt electronic torque sensor, the torque value can be measured and

IEC 60061-3 Lamp Holder Go Gauge E14/ 26/ 27/ 39/ 40 Check Dimensions of Lamp Holders Product information: The lamp holder “Go” and “Not Go” gauges are manufactured according to relative requirements of IEC 60061-3, they are required by UL 496 2013 clause 5.2.4.2. These lamp holder gauges are used to check whether the dimensions and shapes of the lamp holders meet standard requirements by using the lamp holders interchangeable size gauges. Main Parameters: Material: made of

IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test This testing equipment is specifically designed to meet the requirements of IEC 62560 Clause 15, providing a reliable and standardized solution for evaluating the performance of non-dimmable self-ballasted LED lamps. The system simulates the electrical conditions defined in the Figure 8 test circuit, ensuring accurate verification of lamp compliance, stability, and operational characteri

IEC 60238 Clause 16.2 Figure 6 Torque Test Apparatus With Lamp Holder Gauge E14/E27/E40 This torque test apparatus is designed to comply with Clause 16.2 and 16.4 Figure 6 of IEC 60238:2016+A1:2017+A2:2020 standards for testing lamp holder durability and mechanical strength. Test Procedures and Operation Lamp Holder Gauge Replacement Select the appropriate lamp holder gauge according to lamp base specifications. Loosen the lamp holder fixing screws, remove the existing gauge,

IEC 62560 Clause 6 Interchangeability Gauges For E14 And E27 Lamp Cap 7006-28A-1 Product Overview: Our Lamp Cap Gauges are meticulously designed to meet the dimensional and safety requirements outlined in IEC 60061-3, supporting compliance with IEC 60598-1, IEC 62560:2015, and other related lighting standards. These gauges provide accurate measurement and verification of lamp caps and holders, ensuring proper fit, thread integrity, and safety. They are ideal for both

IEC 60061-3 Lamp Cap Gauges Precision CNC Gauge Set for E26, GZ10, GX53, B15d, and E11 Testing Product Overview: The Lamp Cap Gauges are manufactured in full compliance with IEC 60061-3, as required by IEC 60598-1, IEC 62560:2015, and related lighting standards. They are used for dimensional and quality inspection of lamp caps and holders, ensuring accurate fitting, safety, and compatibility in lighting product manufacturing and certification. Each gauge is designed and

Intelligent Luminaires Thermal Aging Rack with 64-Channel Temperature Monitoring Product information: The luminaires thermal aging rack is designed and produced based on customer’s requirements and the test sample’s form, material, maximum dimensions, maximum weight and other data provided by the user. It is used to simulate the on-off aging test of lights, while monitoring the temperature rise to determine whether there is any impact on the usage and verify its reliability.

IEC60598-1 High-Energy Pendulum Hammer Impact Test Apparatus IK08 This test apparatus is designed for impact resistance testing of household and similar electronic/electrical products and their accessories (plugs, sockets, wall-mounted boxes, screw glands, covers, switches, lamps, etc.) to evaluate product safety performance and strength levels. Compliance Standards IEC60068-2-75:2014 "Environment testing for electric and electronic products - Test Eh: Hammer tests" IEC60598

IEC 61347-1 Thermal Protection Ballast Heating Test Chamber For Thermally Protected Ballasts Product information: Standard: IEC 61347-1 Annex C figure D.1, UL8750 figure 8.3, UL935 figure 25.1. This equipment is manufactured according to the requirements of IEC61347-1:2012 standard Appendix D for the test chamber for heating test of control devices of thermally protected lamps. Due to the requirements and limitations of the standard, this test chamber does not use duct

IEC 60598-1 Fluorescent Lamp Axial Force Tester for Mechanical Strength of Lamp Holder Test Product Information: Standard: IEC60598-1:2014 "Luminaries - Part 1: General requirements and tests" clause 4.4.4 IEC62560:2015 "Self-ballasted LED-lamps for General lighting services by voltage >50V - Safety specifications" clause 9.4 Specimen and Limitations: Lampholders for fluorescent lamps and self-rectified lamps. Test Purpose: Used to test the mechanical strength of lampholde

Axial Force Of Edson Caps Test Equipment IEC 62560 Luminaries Test Equipment Product information: The test equipment is designed and manufactured according to IEC 62560 clause 9.4. It is used for checking the axial strength of the Edison cap. Technical parameters: Samples and restrictions Edison lamp cap Test purpose Used to detect the mechanical strength of caps of Edsion lamps. Test principle Use a motor-driven pressure plate to apply a certain pressure to the center of the

IEC60068-2-75 High Energy Pendulum Hammer Impact Tester for IK07-IK10 Product Specifications Attribute Value Impact Energy 2J -20J IK Rating IK07-IK10 Lifting Method motor-driven, 200–1200 mm Release Method Electromagnetic Hammer Material Steel Key Function Anti-secondary impact Product Description This test apparatus conforms to IEC60068-2-75:2014, IEC60598-1:2017, EC62262:2002, and other relevant standards. It is designed to evaluate the impact resistance of household and

E14 E27 GU10 Lampholder Test Caps Set Bending Test Shafts for Lamp Socket Testing Product Description This Lampholder Test Cap Set is engineered for conducting mechanical bending tests on common light socket types, including E14, E27, and GU10. These test caps are essential tools for verifying the structural integrity and compliance of lamp holders during quality inspection and certification procedures. Each test cap comes with an integrated metal shaft, enabling precise

IEC 60238 Figure 4 Normal Operation Test Apparatus For Screw-Type Lamp Holder Test Product information: Standard: IEC60238:2016Edition 9.1 (2017) figure 4. Sample and restrictions: Screw-type lamp holder. Test purpose: Used to determine the stability and mechanical properties of the lamp holder. Test principle: Mainly used for lamp holders that are used normally for 100 times and should not hinder continued use and should not weaken their anti-electric shock function. The

Precision E27 Lamp Cap Gauge Set IEC 60061-3 DC53 Steel (58-60 HRC) Product Overview: This product is made from Japan DC53 steel with a Rockwell hardness of 58–60 HRC, and complies with IEC 60061-3 standards. It is designed for quality inspection of E27 screw-type lamp caps. The structure and thread profiles (such as thread waveforms) are computer-calculated and optimized, then precision-machined using CNC equipment, resulting in high accuracy and a refined appearance. The

"Go" and "Not Go" Gauge Set for UL 496 Clause 5.2.4.2 Compliance Thread Inspection Tool Product Overview For E14 E26 E27 E39 E40 Lampholders Go & Not Go Gauge: The lampholder “Go” and “Not Go” gauges are manufactured according to relative requirements of IEC 60061-3, they are required by UL 496 2013 clause 5.2.4.2. These lampholder gauges are used to check whether the dimensions and shapes of the lampholders meet standard requirements by using the lampholders interchangea

IEC 60061-3 E14 E26 E27 E39 E40 Lampholders Go & Not Go Gauge Confirm The Dimensions Of Socket Product Overview For E14 E26 E27 E39 E40 Lampholders Go & Not Go Gauge: The lampholder “Go” and “Not Go” gauges are manufactured according to relative requirements of IEC 60061-3, they are required by UL 496 2013 clause 5.2.4.2. These lampholder gauges are used to check whether the dimensions and shapes of the lampholders meet standard requirements by using the lampholders