Vehicle Testing Equipment

IEC 62196-1: 2020 Electric Vehicle Connectors Temperature Rise Test Equipment Product Overview For Electric Vehicle Connectors Temperature Rise Test Equipment: This temperature rise test system meets the standard requirements of IEC 62196-1: 2020 clause 24, IEC 60309-1: 2012 clause 22, etc. It is suitable for detecting the temperature rise test after the charging pile interface plug and socket pass the rated current, and assessing the heating of the surface of the electrical

IEC 60309-1 Vehicle Charging Interface Cable Bending Test Equipment With Load Product Overview For Vehicle Charging Interface Cable Bending Test Equipment: The flexibility testing apparatus is designed and manufactured according to requirements of IEC62196-1: 2020 clause 26.4 figure 20, IEC60309-1: 2012 clause 24.4 figure 9, etc. It is used to process the mechanical load flexing test of the vehicle plugs, socket-outlets and couplers non-rewireable accessories. The equipment

IEC 62196-1 Electric Vehicle Charging Plug And Socket Cable Flexing Test Equipment Standard For Electric Vehicle Charging Plug And Socket Cable Flexing Test Equipment: IEC 62196-1:2014 "Plug,socket-outlets,vehicle couplers and vehicle inlets–Conductive charging of electric vehicle-Part1:Charging of electric vehicles up to 250A a.c and 400A d.c" clause 7.11 and clause 7.15 IEC 60309-1:2012 "Plug,socket-outlets and couplers for industrial purposes–Part1:General requirement"

IEC62196-1 Clause 7.11 EV Connector And Plug Breaking Capacity Test Equipment Product Information For EV Connector And Plug Breaking Capacity Test Equipment: The Vehicle Connector and Plug Breaking Capacity test machine conforms to the standard requirements of IEC60309-1 clause 20 and clause 21, IEC62196-1 clause 7.11 and clause 7.12 and etc. It is used to verify whether electrical accessories such as electric vehicle charging interfaces, industrial plugs, socket-outlets and

IEC 60309-1 Vehicle Connector And Plug Breaking Capacity Testing Machine Product Information For Vehicle Connector And Plug Breaking Capacity Testing Machine: This test equipment meets the requirements of IEC 62196-1Ed.4CDV 2020 clause 22, 23.2, 23.3, fig 15, table 8 and table 9, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories such as electric vehicle charging interfaces, industrial plugs, socket-outlets and couplers can

IEC 61851-1:2017 Pendulum Impact Test Apparatus for EV Charging Interface Product Information For Pendulum Impact Test Apparatus: Comply with standard EN IEC 61851-1-2019, 12.11 /IEC 61851-1-2017 clause 12.11, IEC60068-2-75:1997, IEC62262:2002, etc. For the mechanical strength test of electric vehicle charging piles for charging vehicles. Test principle: According to the test Eha: the pendulum, the impact element is freely released at a certain height through a 1-meter

Electric Vehicle Accessories Charging Plug Misalignment Test Apparatus IEC62196-3 Product Overview For Misalignment Test Apparatus: This misalignment test apparatus conforms to IEC62196-3 clause 36.3, figure 18. Technical Parameters For Misalignment Test Apparatus: Power AC220V, 60Hz Control Method PLC control, touch screen operation Station One Drive Mode servo motor, two pcs, X and Y Force 0-500N Force holding time 0-999.9s Interval time 0-999.9s Force application direction

DIN EN ISO 6270-2 Motor Vehicle Components Condensation Test Equipment Product overview For Motor Vehicle Components Condensation Test Equipment: This condensation test chamber meets the condensation test requirements of .VW 80000-2017,DIN EN ISO 6270-2, GS95011-4-2004, DIN 50017, etc. It simulates the condensation on electronic modules in motor vehicles. It is meant to evaluate the robustness of electronic modules with respect to condensation. Technical parameters For Motor

IEC 61851-1 PLC Control System Leakage Tracking Test Equipment Product information: The tester is designed and manufactured according to the standard requirements of IEC60112, and required by IEC 61851-1 clause 12.3, IEC 61851-23 clause 11.6, IEC 62196-1Ed.4CDV 2020 clause 28.4, 29.6, IEC60335-1 clause 29.2 and Annex N, IEC 60065:2014 clause 13.4, IEC60598-1, IEC 60884-1:2013 clause 28.2, UL746A and ASTM D3638-92 and etc. The working principle of the leakage tracking test

IEC 61851-1 20J Impact Force Mechanical Impact Device For Impact Test Product information: This mechanical strength impact test equipment complied to IEC 61851-1 2017 clause 12.11 standards. 1. Main purpose: This device is composed of two kinds of impact test apparatuses, and two kinds of mechanical strength test methods can be used to perform impact test on EVSE shell. 2. Installation sample: installation of a single sample is less than 1min. 3. Applicable sample size:

IEC60884-1 20N Gauge For Checking Non-Accessibility Of Live Parts Through Shutter Product information: This gauge conforms to the standard requirements of IEC60884-1 clause 21 figure 9 and figure 10, IEC 62196-1:2020 clause 10.2, and etc. The SN2110 test probe with 20N force is used to test whether the live parts inside can be touched. Technical parameters: Bar width (mm) 3+0.03 0 Bar thickness (mm) 1+0.015 0 Bar length(mm) 80±0.5 Chamfer edge(mm) R0.2±0.05 Bar material Rigid

IEC 61851-1 High & Low Temperature Climate Charging Pile Test Chamber System Overview: This walk-in test chamber simulates the temperature and humidity changeable environment for the products or materials. It is widely used in the adaptability test of electrical, electronics, instrument and meter and other product parts under high and low temperature and humid environment during storage, transportation and usage, to determine the temperature adaptability of the above products

IEC 61851-1 Clause 8 Test Probe C For Electric Vehicle Conductive Charging System Test Product information: This probe conforms to standard requirements of Electric Vehicle Conductive Charging System-Part 1: General requirements IEC 60529 Edition 2.1 2001-02, IEC61032 test probe C and IEC60529 for IP3, IEC60065 and etc. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with

IEC 61851-1 Clause 12.9 High & Low Temperature Climate Chamber Applied standards: This programmable temperature chamber is required by: IEC 61851-1 clause 12.9 and 12.10, IEC 61851-23 clause 101.2.1.1 IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT” IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT” IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT” IEC60068-2-30:2005

Product information: This is a precision test finger made in accordance with IEC 61851-1 clause 8 and 12.4, IEC 62368-1:2018 clause 5.3.2, 8.5.4.3, V.1.2 and figure V.2, IEC60884-1:2013 clause 10.1, 16.2, IEC 60669-1: 2017 Clause 10.1 &13.3.3 &20.1 &21.1, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the

Standards & Clauses: This load cabinet conforms to IEC 62196-1:2020 clause 22. It is used to process breaking capacity test for plug, socket, switch, connector, relay and other parts. The load cabinet has single-phase power output and single-phase load input, and the load can be divided into resistive, inductive or capacitive loads. Application: Used to provide adjustable load voltage, current