Vehicle Testing Equipment

IEC 62196-1 Non-rewireable Accessories Mechanical Strength Flexing Testing Apparatus for EV Product Information: The flexibility testing apparatus is designed and manufactured according to requirements of IEC62196-1: 2022 clause 26.4 table 14, IEC60309-1: 2012 clause 24.4 figure 9, etc. It is used to process the mechanical load flexing test of the vehicle plugs, socket-outlets and couplers non-rewireable accessories. The equipment adopts PLC control and operated by 7-inch

IEC 60529 IPX6 Water Spray Protection Test System For Vehicle Rain Test With Water Tank Product Information: This rain test room is mainly based on IEC60529:2013 "Degrees of protection provided by enclosure (IP code)" IPX6 and the "Automotive Rain Test Line Requirements" provided by the user, heaviest piece weight and other data compilation, design and production. Used to assess and verify the rainproof performance of vehicle doors and electrical components for high-altitude

Vehicle Inlets Drive Over Testing Equipment Of EV Power Supply Plugs Product introduction: The vehicle inlets drive over testing machine is designed and manufactured by our company in accordance with clause 33 of the IEC 62196-1:2022 standard and etc., and meets the test method requirements specified in Section 7.21 of the GB/T 20234.1-2023 standard. It is a test equipment used to evaluate the resistance of electric vehicle power supply plugs and power supply sockets and

IEC 62196-1: 2022 Electric Vehicle Non-Rewirable Accessories Flexing Test Apparatus With Load Product Overview: The flexibility testing apparatus is designed and manufactured according to requirements of IEC62196-1: 2022 clause 26.4 figure 20, IEC60309-1: 2012 clause 24.4 figure 9, etc. It is used to process the mechanical load flexing test of the vehicle plugs, socket-outlets and couplers non-rewireable accessories. The equipment adopts PLC control and operated by 7-inch

Vehicle Connector And Plug Mechanical Endurance Test Machine For Vehicle Charging Interfaces Product information: This test equipment meets the requirements of IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories such as electric vehicle charging interfaces, industrial plugs, socket-outlets and couplers can withstand the mechanical, electrical and

IEC 61851-1 Strength Impact Test Equipment For Electric Vehicle Power Supply Equipment With PLC Control Product Information: This test equipment is designed and manufactured in accordance with the requirements of standards such as IEC 61851-1 2017 Clause 12.11. The test equipment is composed of two kinds of impact test devices. Two kinds of mechanical strength test methods can be used for impact test of EVSE shell. The impact energy is formed by releasing the pendulum through

IEC62196-1 Electric Vehicle Socket Breaking Capacity Test Device With PLC Display Screen System Introduction: The test equipment meets the requirements of articles 22 and 23 of IEC62196-1: 2020, 20 and 21 of IEC60309-1: 2012. Used to verify that electrical accessories such as charging interfaces, industrial plugs, sockets and couplers can withstand mechanical, electrical and thermal stresses during normal operation without excessive wear or other harmful effects. Servo motor

IEC 62196-1 New Energy Resources Automobile Socket Tension Test Device Product overview: IEC 62196-1Ed.4CDV 2020 Article 16.16 requires the use of this pullout force test instrument. Test principle: The fixed accessory (socket or vehicle air intake) is installed in such a way that during the first stage of insertion, the mating accessory is moved vertically downward. A main weight of 9.2 kg is placed appropriately on the fitting attachment. If the mobile fitting does not

IEC62196 Electric Vehicle Charging Plug And Socket Misalignment Tester Product Information: This misalignment test apparatus conforms to IEC62196-3 clause 36.3, figure 18. Technical Parameters: Power AC220V, 60Hz Control Method PLC control, touch screen operation Station One Drive Mode servo motor, two pcs, X and Y Force 0-500N Force holding time 0-999.9s Interval time 0-999.9s Force application direction -X, +X, -Y, +Y Specimen mounting bracket 30 ° slope, 1000mm height from

IEC60309-1 Vehicle Connectors And Plugs Fracture Capacity Vehicle Testing Equipment Product Information: The Vehicle Connectors and Plugs Breakage Resistance Tester meets the requirements of standards such as IEC60309-1 clauses 20 and 21 and IEC62196-1 clauses 7.11 and 7.12. It is used to verify that electrical accessories such as electric vehicle charging interfaces, industrial plugs, sockets and couplers can withstand the mechanical, electrical and thermal stresses that

IEC60309-1 2012 8 Channels Connector Temperature Rise 0 To 400°C Test System Equipment Overview: The equipment provides a low voltage test voltage to the sample by simulating the normal use environment, and collects the temperature rise within a certain period of time and compares it with the standard requirements. It is used for testing the temperature rise of plugs and sockets of charging ports interface after passing the rated current, assessing the heating of the surface

Withdrawal Force And Latching Verification Test Apparatus For Vehicle Connector IEC 62196-1 Product Information For Withdrawal Force And Latching Verification Test Apparatus: This test equipment conforms to IEC 62196-1:2022 clause 14.1.5, 14.1.6, fig13, fig14. It is used to check the withdrawal force required when the test plug is withdrawn from the socket-outlet and latching device. Technic Requirements For Withdrawal Force And Latching Verification Test Apparatus: A

IEC 62196-3 Electric Vehicle Pressure Leak Test Overpressure Test System Product Information For Overpressure Test System: This overpressure test system meets the test requirements of IEC 62196-3-1 Cl 101.6. It is used to carry out pressure leakage test on the sealing requirements of the liquid coolants under 10L volume. The system's booster pump outputs high pressure to verify the pressure resistance of the samples according to the different pressures of the samples. The

IEC 62196-1: 2022 Vehicle Terminal Test Equipment Mechanical Tests On Terminals Product Information For Vehicle Terminal Test Equipment: This testing machine conforms to IEC 62196-1:2020 clause 13.3.1 fig12, table 3, etc. It is used to process mechanical tests on terminals, for judging whether the design and the structure of the new terminals are fitted with new conductors and of the minimum and the maximum cross-sectional areas is good. Besides, it is also used to check

IEC 62196-1: 2022 EV Switch-Outletor Apparatus For Checking The Withdrawal Force Product InformationN For Apparatus For Checking The Withdrawal Force: This test equipment conforms to IEC 62196-1:2022 clause 14.1.5, 14.1.6, figure 13, figure 14. It is used to check the maximum force required when the test plug is withdrawn from the socket-outlet or vehicle connector. It is also used to verify the design of latching device holding the plug in the socket-outlet or vehicle

IEC 62196-1: 2022 Gauges For Testing Insertability Of Round Unprepared Conductors Product Overview For Gauges For Testing Insertability Of Round Unprepared Conductors: The gauges conform to IEC 62196-1:2014 clause 13.2.1 figure 6 table 7, IEC 62196-1:2022 clause 13.2.1 figure 11 table 2. They are used to verify the screw type terminals shall allow the proper connection of copper or copper-alloy conductors having nominal cross-sectional areas as shown in Table 2 of IEC 62196-1

Vehicle Switch-Outlet Interlock Withdrawal Force Test Apparatus IEC 62196-1 Product InformationN For Vehicle Switch-Outlet Interlock Withdrawal Force Test Apparatus: This test equipment conforms to IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14. It is used to check the maximum force required when the test plug is withdrawn from the socket-outlet or vehicle connector. It is also used to verify the design of latching device holding the plug in the socket-outlet or vehicle

IEC 62196-1 Electric Vehicle Terminal Test Equipment Mechanical Tests On Terminals Product Information For Electric Vehicle Terminal Test Equipment: This testing machine conforms to IEC 62196-1:2020 clause 13.3.1 fig12, table 3, etc. It is used to process mechanical tests on terminals, for judging whether the design and the structure of the new terminals are fitted with new conductors and of the minimum and the maximum cross-sectional areas is good. Besides, it is also used

IEC 60309-1 Non-Rewireable Strength Flexing Test Equipment For Electric Vehicle Product Overview For Non-Rewireable Strength Flexing Test Equipment: The flexibility testing apparatus is designed and manufactured according to requirements of IEC62196-1: 2020 clause 26.4 figure 20, table 14, IEC60309-1: 2012 clause 24.4 figure 9, etc. It is used to process the mechanical load flexing test of the vehicle plugs, socket-outlets and couplers non-rewireable accessories. Structure

IEC 62196-1 Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus​ Product Information For Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus​: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and table 11, IEC60309-1: 2012