Switch Life Tester

IEC 60950-1 Ball Pressure Test Device For Testing Non-Metallic Insulating Material Product Information For Ball Pressure Test Device: The ball pressure test apparatus conforms to many standard requirements, such as IEC60884-1, IEC60335-1, IEC60950 and so on. Application: external parts of non-metallic material, parts of insulating material supporting live parts including connections and parts of thermoplastic material providing supplementary insulation or reinforced

IEC 60884-1: 2022 Conductor Damage Degree Test Equipment For VDE Type Plugs Sockets Product Information For Conductor Damage Degree Test Equipment: Standard: IEC 60884-1:2022 clause 12.2.5 figure 11, IEC 60669-1:2017 clause 12.2.5 &12.3.10 figure 9, UL486A-B, etc. Application: This device is use to check whether the terminals with screw and screwless terminals can bears the mechanism force under normal operation. Mainly use to judge whether the design and structure of screw

IEC 60884-1: 2022 Test Set Up For Plugs And Sockets Temperature Rise Test Product Information For Test Set Up: The device is made and manufactured according to the related standard requirement of temperature rising, such as IEC 60884-1:2022 clause 19, IEC 60669-1:2017 Clause 17, VDE0620 etc. It is applicable to the temperature rising of electronic accessories in working position. Technical parameters For Test Set Up: Model SN2119 Test stations 2 stations are independently

IEC 60335-1 5KVA Multimeter Electrical Safety Tester With 6 Functions Product Information For Multimeter Electrical Safety Tester: This multitester electrical safety tester Conforms to IEC 60598-1 clause 8.2.3, clause10.2.1, clause 10.2.2, IEC 60950:2013 clause 2.6.3.4, 5.2 and 6.2.2.3, IEC 60335-1 Clause 13, Clause 16, Clause 27 and etc. It integrates 6 functions of hi-pot, insulation, grounding, leakage, power, low-voltage start testing. Features For Multimeter Electrical

DIN VDE 0620-1:2010 Maximum And Minimum Withdrawal Force Verification Apparatus Product Information For Maximum And Minimum Withdrawal Force Verification Apparatus: This apparatus is designed to meet the exacting requirements of major international standards such as IEC 60884-1:2013 clause 22.1 Fig 18 and Fig 19. It is used to test whether the maximum force of pulling the plug from the socket and the minimum force of pulling the single plug pin from the plug bush is in the

IEC 60884-1: 2022 Load Cabinet For Plug And Socket Normal Operation Life Test Product Information For Load Cabinet: This load cabinet conforms to Standards of IEC 60669-1:2017 clause 18 and 19, IEC 60884-1 2013 clause 20 and 21, IEC 60950-1, IEC 60598-1, IEC61058-1 and so on This device is used for household and similar purpose fixed electrical appliance switch, plug and socket, coupler for on-off ability, breaking capacity and normal operation life test. The top of this

IEC 60884-1: 2022 Compression Testing Apparatus For VDE Type Plugs Sockets Product Information For Compression Testing Apparatus: The specimens are subjected to a compression test as shown in figure 8 of IEC 60884- 1:2013, the temperature of the pressure plate, of the base and of the specimens being (23±2) ℃ and the force applied being 300 N. The specimens are first placed in position a), as shown in figure 8 of IEC 60884-1, and the force is applied for 1 min. They are then

Plug Gripping Test Apparatus For VDE Type Plugs Sockets IEC 60884-1: 2022 Product Information For Plug Gripping Test Apparatus: This device is used to verify the plug clamping test. It conforms to IEC 60884-1: 2022 Annex C alternative gripping tests figure C.2, the reference plug as per C.1 also below shown: Technical Parameters For Plug Gripping Test Apparatus: Item Specifications A reference plug The reference plug should be made according to IEC 60884-1 Annex C Figure C.1.

IEC 60884-1:2022 Gauges For Checking Dimensions For VDE Type Plugs Sockets Product Information For VDE Gauges: These measuring gauges confirm to the standard of IEC 60884-1:2022 clause 9, which are used for the dimensional measurement and verification of the plug socket for household and similar use. They are the necessary testing devices used in the laboratory and measurement test department. The specific measuring gauges are made according to DIN VDE 0620-1:2010: Technical

IEC 60884-1:2022 Device For Checking Non-Solid Pins For VDE Type Plugs Sockets Product information For Device For Checking Non-Solid Pins: The appliance is checked by the test of IEC60884-1:2013 clause 24, figure 14, for pins which are not solid, by the following test which is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the pin,

UL817-2021 Power Cord Abrupt Pull Test Apparatus 6 Stations PLC Control Standars For Power Cord Abrupt Pull Tester: The test apparatus is designed and manufactured according to the requirements of UL817-2021 "Standard for safety: Cord Sets and Power-Supply Cords" 11.10.2, 11.10.3, 12.5, 18.2.4 and Figure 12.3 and Figure 12.4 and Figure 18.1. Technical Parameters For Power Cord Abrupt Pull Tester: Power supply Match client's local power supply requirements Use environment

Self-Ballasted Lamp Switch Load Cabinet For Self Ballasted Lamp Loads IEC60669-1 Standards For Self-Ballasted Lamp Switch Load Cabinet: IEC60669-1:2007 "Switches for household and similar fixed-electrical installations - Part1:General requirements" clause 19.3 Test Principle For Self-Ballasted Lamp Switch Load Cabinet: Switches intended for self ballasted lamp (SBL) loads shall withstand, without excessive wear of other harmful effect, the electrical and thermal stresses

IEC 60884 Apparatus For Testing To Abnormal Heat Of Insulating Sleeves Of Plug Pins Product Information For Testing To Abnormal Heat Of Insulating Sleeves Of Plug Pins: This apparatus confirms to the standard requirement of IEC60884-1 clause 24.19 figure 38. It is used to test the pressure-resistant properties of the electrical accessories and mounting box under the circumstance of being heated. This testing equipment should be put into use with the heating box. This device

Coupler Pulling Test Apparatus Connector To Pull Test For Household IEC 60320-1 Standards For Coupler Pulling Test Apparatus: IEC60320-1:2021 "Appliances couplers for household and similar general purposes- Part1:General requirements" clause 23.3 and figure 19. Test principle For Coupler Pulling Test Apparatus: The connector is inserted into an appliance inlet of a type corresponding with the connector to be tested and complying with the relevant standard sheet, a spring

Coupler Withdrawal Force Test Apparatus For Electric Appliances Coupler IEC 60320-1 Standards For Coupler Withdrawal Force Test Apparatus: IEC60320-1:2021 "Appliances couplers for household and similar general purposes- Part1:General requirements" clause 16 and figure 12. Technical Parameter For Coupler Withdrawal Force Test Apparatus: Test Station Single Operation Mode Manual operation Heating Temperature Room temperature -180°C,preset Gauge Configuration With 10 A heat

IEC 60320-1 Coupler Heating Test Apparatus For Heating Resistance In Hot Conditions Standards For Coupler Heating Test Apparatus: IEC60320-1:2021 "Appliances couplers for household and similar general purposes- Part1:General requirements" clause 18.2 and figure 13. Technical Parameters For Coupler Heating Test Apparatus: Test station Single Control method Electrical Heating method Electrical heating, RT+10~160℃±2℃, can be preset Test contents 10A heat-resistant appliance

IEC60884-2-2 0.22/0.33/0.44/0.55J Fourth Gear Spring Impactor For Testing Appliance Socket Product overview: The spring impactor is made according to the standards of IEC60068-2-75 and IEC60884-2-2. It is used to test the impact resistance of all surfaces that may be touched by appliance sockets, and evaluate the safety performance and strength level of products. Test principle: The spring impactor mainly generates standard energy by the standard mass of each component and

IEC 60335-1 Clause 22.3 Plug Torque Test Apparatus 0.25Nm To 0.4Nm Torque Force Product information: This apparatus conforms to IEC 60335-1 clause 22.3, IEC60065:2014 clause 15.4.1 and figure 11, IEC 60884-1 2013 clause 14.23.2, IEC60065 clause 15.4.1 and figure 11, etc. This device is used to check the torque applied to the output socket after the device with the plug inserted into the fixed output socket is inserted into the output socket. The device has good sensitivity,

IEC60068-2-63 0.14/0.2/0.35/0.5/0.75/1J Six-Energy Impact Hammer Product Overview: The Spring Hammer (Impact hammer) is made according to the standards of IEC60068-2-63 and IEC60068-2-75. This spring hammer is intended to test the impact resistance to shell, operating arm, handle, knob, indicator lights and shades of electrical appliance for household or similar purpose, to verify the safety performance and strength of the product. Technical Parameters: Model SN2207-M Impact

IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A Equipment overview: Th coupler lateral pulling test apparatus is manfactured according to the IEC60320-1 clause 23.3 and figure 19. It is used to test the connector being pulled out of the appliance socket under lateral stress, so as to assess the mechanical strength of the coupler. Test principle: Plug a connector rated over 0.2 A into an appliance inlet that corresponds to the