Switch Life Tester

Product Overview: The 130A test generator is designed and manufactured according to the requirements of IEC60950 clause 2.3.5. It can simulate voltage standards (50Hz or 60Hz) in different regions to meet the test requirements. The instrument is designed with a stable signal source and a large and medium power matching circuit to meet the output requirements under large loads. Input

IEC 62368-1 Figure V.1 Stainless Steel Straight Unjoint Test Probe Product overview:The unjoint test probe of figure V.1 conforms to the requirements of IEC 62368-1:2018 clause V.1.3 and figure V.1 (but straight unjointed version), etc.It is used for determination of the equipment not likely to be accessible to children.There is a M6 thread on the end of the handle, through where the test probe can be connected with a force gauge to achieve required force if necessary.

IEC 60884-1 Switch Life Low Energy Pendulum Impact Test Apparatus Equipment Overview: The Pendulum Impact Test Apparatus is manufactured in accordance with the requirements of IEC60068-2-75, IEC60884-1 clause 24.1, etc. It is suitable for the mechanical strength test of electrical accessories such as plugs and sockets for household and similar purposes, and surface-mounted installation boxes, screw glands, covers, switches, etc. The test device mainly consists of a pendulum

Product Overview: This probe conforms to the standard requirements of IEC 61032 figure 9 test probe 13, IEC60950 figure 2B, IEC 60335-1 clause 8.1.2, etc. This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Probe Dimension: Metal pin tip diameter (mm) Ф3 0 -0.05 Metal pin tail diameter (mm) Ф4 0 -0.05 Metal pin length (mm) 15

IEC60335-1 Clause 8.1.3 Test Probe 41 For Testing Glowing Heating Elements Product Overview: This probe conforms to the standard requirements of IEC60335-1 Clause 8.1.3, IEC 61032 test probe 41 figure 16, etc. This probe is intended to verify the protection against to glowing heating elements. Probe Dimension: Probe cone part length (mm) 21.5 (0,-0.05) Probe rod part diameter (mm) Ф30±0.05 Probe length (mm) 80±0.2 Handle diameter (mm) Ф50±0.2 Handle length (mm) 80±1 Probe

IEC 60065:2014 Clause 9.1.7 Enclosure Openings Unjointed Test Probe 11 Product Overview: This probe conforms to the standard requirements of IEC 60065:2014 clause 9.1.7, IEC61032 fig.7 test probe 11, etc. This probe may be used to verify the protection of persons against access to hazardous parts and to verify the mechanical strength of openings in the enclosure of internal barriers. Probe Dimension: Probe Tip Length (mm) 20 0 -0.05 Probe Tip Cylindrical Radius (mm) R2±0.05

Product Information: This anti-shock probe experiment device is designed and manufactured meet the requirements of the standard of IEC60335-1 Clause 8.1.4, IEC 60065:2014 clause 9.1.1.2, and etc. It is used together with the testing probe for checking whether the probe can contact the live parts of electrical appliance, to verify the protection of persons against access to hazardous parts inside the enclosure. For

Product overview: The Joint Test Probe of Figure meets the standard requirements of UL507 Fig 9.2 (PA100A), IEC 62368-1:2018 clause 4.8, 5.3.2, 8.5.4.3, V.1.2 and figure V.1, etc., UL474 Fig 5.1, UL982 Fig 7.1, UL1017 Fig 2, UL1062 Fig1.2, UL1278Fig 8.3, UL1310 Fig 16.2, UL6500 Fig14, UL60065 Fig14 and UL60950 Fig NAF.1. Technical Parameters: Probe material Stainless steel Handle material Nylon