IEC 62368 Test Equipment

Intelligent Compressive Strength Testing Machine Packaging Testing Equipment IEC 62368-1 Product Information: This machine is the most direct test instrument for verifying the compressive strength of cartons or other packaging containers. It is used to determine the compressive strength of cartons, and can be used for steady pressure tests and crush tests. The results of the tests can be used as an important reference for the height of the finished product containers at the

IEC 62368-1 Annex G15.2.3 High And Low Temperature Tensile Testing Equipment Test Force 500kg Product overview: This machine is controlled by computer and is widely used in mechanical performance tests of non-metallic materials such as rubber, plastics, wires and cables, textiles, waterproof materials, non-woven fabrics, metal wires, metal foils, metal plates and metal rods. It can also be used with special fixtures. It is suitable for tensile, compression, peeling, shearing,

IEC 62368-1 Annex D.1 Impulse Voltage Generator Test Equipment Product Information: The impulse voltage generator conforms to the standards as follows. IEC 61180-1:2016 < High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements, test equipment> clause 7. IEC60335-1:2016 clause 14. IEC60950-1:2013 clause1.5.7.2, 1.5.7.3,2.10.3.9,6.2.2.1,7.4.2,7.4.3, G5, Annex N. IEC60065:2014 clause13.3.4, Annex J.5, Annex K. IEC 62368-1

IEC 62368 Cl 9.6.2 Fig 47/48/49 Steel Disc Aluminum Ring Aluminum Foil Product Overview: They are the accessories (foreign objects) for testing wireless power transmitter. Applied Standards: The steel disc conforms to IEC 62368-1:2018 clause 9.6.2 and figure 47. The aluminum ring conforms to IEC 62368-1:2018 clause 9.6.2 and figure 48. The aluminum foil conforms to IEC 62368-1:2018 clause 9.6.2 and figure 49.

IEC 60950-1 Clause 2.4.2 500Ω ± 10% Non-Inductive Resistor Product Information: This 500 Ω±10% non-inductive resistor is required by IEC 60950-1:2013 clause 2.4.2, IEC 60335-1 clause 8, IEC 60065 cl.2.4.2 and etc. Used to test the leakage current between primary and secondary. Parameter information: Applied standards: IEC 60950-1:2013 clause 2.4.2, IEC 60335-1 clause 8, IEC 60065 cl.2.4.2 and etc. Specification: 500 ohms (We also have other specifications, such as 2k ohms, 5k

IEC 62368-1 Annex R Computer Controlled Restricted Short-Circuit Test Machine Product Information: This restricted short-circuit test machine is required by IEC62368-1:2018 clause 5.6.4.1&5.6.5.1, Annex R. The restricted short circuit test device is used to test the protective grounding conductor and current protection circuit breaker 1500A. The purpose of this test machine is to verify that the protective connecting conductor used in the circuit protected by the device with

Tensile Strength Test Apparatus For Measure Mechanical Properties Of Material IEC 62368-1 Product information: This Tensile Strength and Elongation Test Apparatus is designed and manufactured according to the standard requirement of IEC 62368-1:2018 Annex C, Annex G.5, clause Y.4.3, etc. It is used to test the deterioration, deformation, melting or cracking of the gasket material at the conclusion of the temperature conditioning. Features: 1. Using LCD digital display

IEC 62368-1 2018 Clause 5.3.2, V.1.5 Figure V.4 Stainless Steel Wedge Probe Product Information: The wedge-shaped probe complies with IEC 62368-1: 2018 articles 5.3.2, 8.5.4.3, V.1.5 and Figure V.4, IEC 60950-1 Figure naif2 (S5366) and Naf3 (S5370), BS 60950.1108 / 260 / CD and other standard requirements. Used to test whether the slot can be touched by a person. The test sample includes information technology equipment. Technical Parameters: Applied standard IEC 62368-1

IEC 62368-1 Figure 29 Electric Strength Test Instrument For Solid Insulation Or Materials Product Information For Electric Strength Test Instrument: This dielectric proof instrument conforms to the IEC 62368-1:2023 clause 5.4.9.1, IEC60065:2014 clause 10.4.2 and figure 6, IEC60950-1:2013 clause 5.2.2 and etc. It is used to test the dielectric strength of the insulating material. An electric strength test instrument for solid insulation is used to assess the dielectric

IEC 62368-1 Annex G.15 Clause 42Mpa Air Pressure Hydrostatic Pressure Test System Product Information: This hydraulic testing machine is designed and manufactured in accordance with IEC 62368-1 Annex G.15, IEC 60335-1 22.47, IEC 60335-2-5 cl.22.101, IEC 60335-2-7 cl.22.101, IEC 60335-2-35 22.103, IEC 60335-2-24 cl.22.7, IEC 60335-2-15:22.7 and other standards for design and manufacture. Test specimens include valves, water heaters, treated fabrics, etc. The test apparatus is

ASTMD 1525 Vicat Softening Temperature Of Determination Thermal Testing Equipment Product Information For Vicat Softening Temperature Of Determination Thermal Testing Equipment: The vicat softening temperature determination tester conforms to ISO 306-2013 clause 5.2 figure 1, ISO 2507, ISO 75, ASTMD 1525, ASTMD 648, etc. It is mainly used for the determination of thermal deformation temperature and Vicat softening point temperature of non-metallic materials such as plastics,

IEC 60950-1 Metal Mandrel Test Apparatus For Tensile Strength Verification Product Information For Metal Mandrel Test Apparatus: This test apparatus conforms to IEC 62368-1:2018 clause 5.4.4, IEC60950-1:2013 clause 2.10.5.8, Annex AA, figure 14~16, IEC60558-1 Fig6, etc. It is used for tensile and electrical strength verification for non-separable thin layer materials. This test apparatus has the mechanical limits in the position of 0o and 230o to make sure the accuracy of the

UL60507 For Lamps Manual Control Water Spray Test Apparatus With 3 UL Spray Heads Product Information For Water Spray Test Apparatus: The testing equipment is used to verify the protective performance of the enclosure for self-ballasted lamps and lamp adapters under UL water spray environment. The water ingress testing equipment apply spray test to test sample by controlling the water supply pressure and the distance between the nozzle and sample. Standards Compliant For

IEC60227-1 Flexible Cables Flexing Testing Equipment For Finished Flexible Cables Product Infromation For Flexible Cables Flexing Testing Equipment: The test machine is designed and manufactured according to standard IEC 60227.2 Clause 3.1 Figure 1, IEC 60245.2 Clause 3.1 Figure 1, IEC60245-1 clause 5.6.3.1 and etc. It complies with the relevant standard requirements of rubber plastic wires’ and cables’ mechanical strength flexing test. This test does not apply to flexible

IEC62368-1 IEC62368-1 LCD Screen Operation Single Station Carrying Handle Strength Test Device Product information: Carrying Handle Strength Test Device​ conform to IEC62368-1:2018 clause 8.8,IEC60601-1:2012standards. Mechanical strength of handles for audiovisual, information technology and communication technology equipment and portable medical electrical equipment with carrying handles or handles. Parameters: Equipment dimensions about: 1600 × 1200 × 2000 (mm) W × D × H

Product information: The blunt probe of figure V.3 conforms to IEC 62368-1:2018 clause 5.3.2, 5.4.10, V.1.4 and figure V.3, IEC60950 figure 2C, IEC60065 figure B1, IEC62151 figure 3 and UL6500 figure B.1. It is used for the bare parts of TNV circuits of information technology equipment to see whether they have sufficient protection. Technical Parameters: Probe Length 80 mm Probe End Radius R6 mm Probe Diameter