Nickel-Based Alloy Tube

ASTM B165 UNS N04400 Seamless Tube GRADE: UNS N04400 (Monel400) STANDARD: ASTM B165 DENSITY: 8.85g/cm³ SPECIFICATION of Nickel Copper Alloy Seamless Pipe: Out Diameter: 10-660mm Wall Thickness: 0.6-50mm CHEMICALREQUIREMENTS about Seamless Nickel Tube: :% Grade Composition,% Ni Cu Fe Mn C Si S N04400 63.0 min 28.0-34.0 2.5 max 2.0 max 0.3 max 0.5 max 0.024 max MECHANICAL PROPERTY: Material and Condition / UNS N04400 Tensile Strength,min MPa Yield Strength(0.2% offset),min MPa

ASTM B444 UNS N06852 Alloy Pipe GRADE: UNS N06852 STANDARD: ASTM B444 / ASME SB444 SPECIFICATION of Seamless Nickel Tube: Out Diameter: 6.35-660mm Wall Thickness: SCH5-SCHXXS Other sizes are available by discussion. SERVICE TEMPERATURE: Grade 1 up to 593°C; Grade 2 above 593°C. CHEMICAL EQUIREMENTS about Iron Based Alloys Tube: :% Grade Composition,% C Mn Si P S Cr Nb Mo Fe Al Ti Ni N06852 0.05 0.50 0.50 0.015 0.015 20.0-23.0 0.51-1.0 8.0-10.0 15.0-20.0 0.40 0.40 Bal

ASTM B690 UNS N08367 Seamless Pipe GRADE: UNS N08367 STANDARD: ASTM B690 SPECIFICATION Nickel Based Alloys Tube: Out Diameter: 3.2-863.6mm Wall Thickness: 0.6-50.8mm CHMICAL REQUIREMENTS about Nickel Alloy Pipe: :% Max UNS C Mn P S Si Ni Cr Mo Fe N Cu N08366 0.035 2.00 0.040 0.030 1.00 23.5-25.5 20-22 6.0-7.0 Balance 0.18-0.25 0.75 MECHANICAL COMPONETS:: UNS Tensile Strength, Min, ksi [MPa] Yield Strength, Min, ksi [MPa] Elongation in 2 in. Or 50mm or 4D, min,% Heat Treatment

ASTM B729 UNS N08024 Steel Pipe GRADE: UNS N08024 STANDARD: ASTM B729 SPECIFICATION of Seamless Nickel Pipe: Out Diameter: 3.2-863.6mm Wall Thickness: 0.6-50.8mm CHEMICAL REQUIREMENTSabout Nickel Alloy Pipe: :% Max UNS C Mn P S Si Ni Cr Mo Fe Cu N08024 0.03 1.00 0.035 0.035 0.50 35-40 22.5-25.0 3.5-5.0 Balance 0.5-1.35 MECHANICAL PROPERTY: UNS Tensile Strength, Min, ksi [MPa] Yield Strength, Min, ksi [MPa] Elongation in 2 in. Or 50mm or 4D, min,% Heat Treatment Heat Quenching

ASTM B163 UNS N08800 Nickel Alloy Tube GRADE: UNS N08800 (Incoloy 800, Alloy 800) SIMILAR GRADES: Incoloy 800H/Incoloy 800HT. STANDARD: ASTM B163/ASME SB163 DENSITY: 8.1g/cm³ SPECIFICATION of NICKEL-BASED ALLOY TUBE : Out Diameter: 10-1219mm Wall Thickness: 0.6-30mm CHEMICALREQUIREMENTS about Nickel Alloy Tube: :%Max Grade Composition,% Ni Cu Fe Mn C Si S Cr Al Ti N08800 30.0-35.0 0.75 39.5 min 1.5 0.10 1.0 0.015 19.0-23.0 0.15-0.60 0.15-0.60 MECHANICAL PROPERTY: Material and

ASTM B668 UNS N08028 Seamless Steel Tube and Pipe GRADE: UNS N08028 (Alloy28, DIN EN10088-1: W.Nr.1.4563) / INCOLOY® alloy 028 N08028 DENSITY: 8.0g/cm³ STANDARD: ASTM B668 / ASTM B709 CHEMICAL REQUIREMENTS of Alloy 625 Seamless Nickel Pipe: : % Max UNS C Mn P S Si Ni Cr Mo Cu Fe N08028 0.030 2.50 0.030 0.030 1.00 30-34 26-28 3.0-4.0 0.6-1.4 Balance MECHANICAL COMPONENTS: UNS Tensile Strength Min, ksi [MPa] Yield Strength Min, ksi [MPa] Elongation in 2 in. Or 50.8mm, min,%

Nickel Based Alloy Tubes Seamless Nickel Alloy Pipe are alloys that have a combination of high strength and certain resistance to oxidation and corrosion at high temperatures of 650 to 1000 °C. According to the main performance, Nickel Copper Alloy Seamless Pipe is subdivided into nickel-based heat-resistant alloy, nickel-based corrosion-resistant alloy, nickel-based wear-resistant alloy, nickel-based precision alloy and nickel-based shape memory alloy. Superalloys are