Wastewater Treatment Chemical

Wastewater Treatment Chemical Anionic Polyacrylamide Powder Mud Additives PAM Anionic Polyacrylamide Paper-Making Dispersant adopts the homopolymerization of acrylamide before adding alkali hydrolysis.After granulating,dring,pulverizing,the appearance of the product is white granule powder.The product will be better used in sewage treatment,especially for wastewater from iron and steel plant,electroplating,metallurgical and coal factory. Well drilling mud raw materials: In

Anionic Polyacrylamide Powder For Wastewater Treatment Chemical Physical Property: This product is soluble ,and insoluble in organic solvents. It presents high polymer electrolyte characteristics in neutral and alkaline mediums. It is sensitive to salt electrolyte, and can be cross-linked into an insoluble gel with the high chemical price metal ion. Application: 1, Materials used for drilling mud additives, can reduce the friction of the drill bit to extend the service life

Anionic Polyacrylamide MW 15-30 Million Flocculant For Wastewater Treatment Chemical Physical Property: This product is soluble ,and insoluble in organic solvents. It presents high polymer electrolyte characteristics in neutral and alkaline mediums. It is sensitive to salt electrolyte, and can be cross-linked into an insoluble gel with the high chemical price metal ion. Molecular Formula: Application: 1, Materials used for drilling mud additives, can reduce the friction of

High Molecular Weight APAM Flocculant For Granite Water Treatment Quick Sedimentation Description: Marble and granite cutting always waste a lot of water, if we discharge the wastewater directly, it is not environmental and our APAM is very high molecular weight Anionic flocculant, it has a function of quick separation and sedimentation for marble and granite wastewater. It is easy to be dissolved in water, within 60minutes. We can provide OEM with your brand name, company

High Molcular Weight Cationic Polyacrylamide Powder For Raw Water Treatment Advantages Economical to use - lower dosage levels. Easily soluble in water; dissolves rapidly. Non corrosive of suggested dosage, economical and effective at low levels. Can eliminate the use of alum & further ferric salts when used as primary coagulants. Reduction in sludge of dewatering process system. Application Fields Raw Water Treatment: - Flocculation - Clarification • Industrial Waste Water

Cationic Polyacrylamide Flocculant Flocking Agent Water Treatment Chemical Product Introduction Polyacrylamide (IUPAC poly(2-propenamide) or poly(1-carbamoylethylene), abbreviated as PAM) is a polymer (-CH2CHCONH2-) formed from acrylamide subunits. It is highly water-absorbent, forming a soft gel when hydrated, used in such applications as polyacrylamide gel electrophoresis, and can also be called ghost crystals when cross-linked, and in manufacturing soft contact lenses. In

Cationic Polyacrylamide MW 15-30 Million Flocculant For Wastewater Treatment Chemical Application: 1, Materials used for drilling mud additives, can reduce the friction of the drill bit to extend the service life of drill bits to improve the penetration rate and the footage, reduce the time for drilling the plug, the collapse of effective anti-wells, in addition to thickening the water used in flooding, fracturing fluid and selective water shutoff, for Enhanced Oil Recovery

Slaughterhouse Waste Water Treatment Chemicals High Molecular Weight Product Description is a high molecular weight cationic polyacrylamide flocculant. It is easy to be dissolved in water, high viscosity, suggested keeping the solution for 1day. In Slaughterhouse wastewater, it works well for separation and sedimentation. Soluble in water, safe, non-toxic, hydrolytic stability, is not sensitive to the change of pH value, anti-chlorine. Harmless, no-flammable and non-explosive

Cationic Polyacrylamide , Industrial Water Treatment Flocculant CAS 9003-05-8 Specifications: Appearance: Off-White Granular Powder Ionic Charge: Cationic Particle Size: 20-100 mesh Molecular Weight: High Charge Degree: Low Solid Content: 89% Min Approximate Brookfield viscosity at 25° C: @ 1.0% >1500 @ 0.50% >600 @ 0.25% >300 Bulk Density: About 0.6-0.8 Specific Gravity at 25°C: 1.01-1.1 Recommended Working Concentration: 0.1-0.5% PH (1% aqua solution): 4-6 Storage

Industry Wastewater Treatment Chemical Zwitterionic Polyacrylamide Sludge Dewatering Agent Physical Property: Zwitterionicpolyacrylamide(PAM) is produced on cation monomer,acrylamide monomer and hydrolytic reagent. white fine grain or powdery solid. Technical target: Solid content(%) PH Value Degree of Cationic(%) Degree of anionic (%) Monomer content of residue(%) ≥88 5-8 5-50 8-15 ≤0.05 Application: 1,As Sludge Dewatering Agent Because urban sewage drainage's property is

Industry Wastewater Treatment Chemical Nonionic Polyacrylamide Powder Sand Control And Sand-fixation Nonionic polyacrylamide is homopolymer formed of acrylamide, with high purity, good soEubility. high molecular weight. This series of products are with high molecular weight polymer and liner polymer low ion degree. Because of its special groups, and endow it with flocculation and dispersion, thickening and bonding. film. gel. stable colloidal. Sewage treatment agent: When

Anionic Polyacrylamide MW 15-30 Million Flocculant For Wastewater Treatment Chemical Physical Property: This product is soluble ,and insoluble in organic solvents. It presents high polymer electrolyte characteristics in neutral and alkaline mediums. It is sensitive to salt electrolyte, and can be cross-linked into an insoluble gel with the high chemical price metal ion. Molecular Formula: Application: 1, Materials used for drilling mud additives, can reduce the friction of

Wastewater Treatment Chemical Anionic Polyacrylamide Powder Mud Additives PAM Anionic Polyacrylamide Paper-Making Dispersant adopts the homopolymerization of acrylamide before adding alkali hydrolysis.After granulating,dring,pulverizing,the appearance of the product is white granule powder.The product will be better used in sewage treatment,especially for wastewater from iron and steel plant,electroplating,metallurgical and coal factory. Well drilling mud raw materials: In

Water Treatment Flocculant Anionic Polyacrylamide PAM White Powder Oil Drilling, Soil Stabilization And Cement Making. APAM Description: Anionic Polyacrylamide can be used widely for Water treatment, oil drilling, Soil Stabilization and Cement making. It is a water soluble polymer formed from acrylamide (a compound with the molecular formula C3H5NO) subunits. Anionic Polyacrylamide has a big range of high molecular weight from 05-25 million, with an anionic charge density

Flocculating Agent Polyaluminium Chloride Pac Cas No 1327-41-9 Polyaluminium chloride specification: Specifications: Spray drying type Appearance: Solid yellow powder Odor: Odorless Al2O3, % : ≥29 Basicity,%: 70.0~90.0 Insoluble,% : 1.0 max Specific gravity(@ 25℃) 1.15-1.20 pH(1% water solution): 3.5~5.0 Pb %:

Organic Flocculants Poly Aluminium Chloride Water Treatment Chemical PAC Product Introduction: This product is a kind of inorganic polymer flocculant. Mainly through compression double, adsorption electricity neutralization, adsorption Bridges, sediment trap, etc mechanism function, make edema subtle aerosols and colloidal ions off firm, gathered, flocculation, coagulation, precipitation to purify the treatment effect. Polyaluminium chloride Features: 1) Spray dryer type 2)

buy polyacrylamide Treatment of Sewage Physical Property: This product is soluble ,and insoluble in organic solvents. It presents high polymer electrolyte characteristics in neutral and alkaline mediums. It is sensitive to salt electrolyte, and can be cross-linked into an insoluble gel with the high chemical price metal ion. Application: 1, Materials used for drilling mud additives, can reduce the friction of the

(1). Mud dehydrating agent: activated-sludge method normally can be used to process urban and industrial sewage water, biochemistry mud is normally colloid with strong hydrophilicity, has high organic content, and is difficult to dewater. (2). Paper-making adhesive: In the paper making industry, the product can directly generate static bridging effect with inorganic salt ions, fiber and other organic organic

Primary Clarification Cationic Polyacrylamide Powder For Raw Water Treatment Advantages Economical to use - lower dosage levels. Easily soluble in water; dissolves rapidly. Non corrosive of suggested dosage, economical and effective at low levels. Can eliminate the use of alum & further ferric salts when used as primary coagulants. Reduction in sludge of dewatering process system. Application Fields Raw Water Treatment: - Flocculation - Clarification • Industrial Waste Water