Anionic Polyacrylamide Flocculant

Drilling Mud Raw Materials Anionic Polyacrylamide Flocculant For Mining Anionic Polymer Flocculant for Mining adopts the homopolymerization of acrylamide before adding alkali hydrolysis.After granulating,dring,pulverizing,the appearance of the product is white granule powder.The product will be better used in sewage treatment,especially for wastewater from iron and steel plant,electroplating,metallurgical and coal factory. Well drilling mud raw materials: In oil field

Granular Powder Drilling Mud Additives hydrolyzed Anionic Polyacrylamide Flocculant Specifications: Appearance: Off-White Granular Powder Ionic Charge: Anionic Particle Size: 20-100 mesh Molecular Weight: Very High Hydrolysis Degree: High Solid Content: 89% Min Approximate Brookfield viscosity at 25° C: @ 1.0% >2000 @ 0.50% >800 @ 0.25% >400 Bulk Density: About 0.6-0.8 Specific Gravity at 25°C: 1.01-1.1 Recommended Working Concentration: 0.1-0.5% PH (1% aqua solution): 6-9

Description: Anionic Polyacrylamide, is solid powder water-soluble polymer with varying molecular weight and charge density. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage flocculation of particles present in water and allow rapid settlement of finely suspended solids. It is a synthetic chemical that can be tailored to fit a broad range of applications.

Anionic / Cationic Polyacrylamide Water Treatment PHPA High Viscosity Cationic PAM Description: PHPA is partially hydrolyzed anionic polyacrylamide (PHPA), which is a water soluble polymer formed from acrylamide (a compound with the molecular formula C3H5NO) subunits. PHPA has a big range of high molecular weight from 20-25 million, with an anionic charge density ranging from 40-50%. It is most often used to increase the viscosity of water (creating a thicker solution) or to

Polyacrylamide Flocculant For Gold/ Silver Mine Wastewater Treatment Most Gold and Silver processes of extracting he mineral by using either Carbon in Pup (CIP) or Carbon in Leach (ClL) processes. The activated carbon dissolved in cyanide is used to recover Gold/Silver. Before leaching, crush and screen the mineral first, then go through ball mills with water and lime. Add flocculants in each thickener to speed up the flocculation, and the underflow will go through series of

APAM / Anionic Polyacrylamide Powder Raw Materials , Water Soluble Polymers For Mining Water Anionic Polyacrylamide( APAM ) Product form: White powder or granule Product features: It has the properties of flocculation, thickening and water absorption. Soluble in water to form viscous liquid. Molecular weight can be adjusted on demand. Specification: project Nonionic anion cation Amphoteric ion White powder Whitepowder White powder White powder White powder Solid content (%) =

High Molecular Weight Medium Anionic Polyacrylamide Road Soil Stabilizer Specifications Appearance: White Granule Molecular Weight: 14-18 Million Granule: 20-100Mesh Solid Content: 90% Minimum Anionic Degree: 10-30% Dissolving Time: 1.5 Hours Maximum (10°C) Insoluble: 0.5% Maximum Monomer Free: 0.05% Maximum Advantages for Anionic Polyacrylamide in Soild Stabilization: Improves stability of problem soils to prevent soil detachment (i.e. prevents erosion) in the first place

Sugar Juice Clarification Equivalent Magnafloc APAM / Anionic Polyarcylamid Flocculant Description: This products is Medium high molecular weight Polyacrylamide (PAM) / Polyelectrolyte powder, which is flocculant especially for sugar mill for sugar juice clarification. Polyacrylamide: Trade Name: APAM Active Ingredient: Medium High molecular weight polymer Chemical Name: Anionic Polyacrylamide / Polyelectrolyte / Flocculant CAS No.: 9003-05-8 Standard: GB17514-2008 Brand:

Description: Anionic polyacrylamide Emulsion is a water based polymer. Anionic Polyacrylamide has a big range of high molecular weight from 16-25 million, with an anionic charge density ranging from 10-60%. Anionic polyacrylamide Emulsion grade has high molecular weight, and medium charge degree. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage

Water Treatment Agent Anionic Polyacrylamide Copolymer Flocculant CAS No. 9003-05-8 Description: Anionic Polyacrylamide AA-6516 grade (APAM) is a water soluble polymer formed from acrylamide (a compound with the molecular formula C3H5NO) subunits. It is Copolymer Acrylamide and acrylic acid. Anionic Polyacrylamide has a big range of high molecular weight from 5-25 million, with an anionic charge density ranging from 10-60%. It is most often used to increase the viscosity of

Industrial Wastewater Treatment Anionic Polyacrylamide Flocculant For Sludge Dewatering Agent Product Name: Polyacrylamide CAS 9003-05-8 flocculant PAM Synonyms: Polyacrylamide CAS RN.: 9003/5/8 Molecular Weight: 71.0785 Molecular Formula: (C3H5NO)n Density: 1.3 Melting Point(℃): >300 °C Flash Point: >230 °F Water Solubility: SOLUBLE Usage: 1. Urban sewage The treatment of domestic sewage with a highly efficient mixed flora with flocculation and degradation separated from

Iran Stone Cutting Wastewater Anionic Polyacrylamide Blu Floc Polyacrylamide 100% Pure The Raitte range of polymers and coagulants are widely used in the treatment of wastewater from both municipal and industrial wastewater treatment plants. Our polymers can be used in all solid-liquid separation processes like: 1. Primary sewage treatment. Usually, Anionic polymer in combination with organic coagulants can reduce the biological loading of ihe secondary treatment. Additionall

Anionic Polyacrylamide For Red Mud Settling Flocculants Prevent Red Mud From Swelling Polyacrylamide for Red Mud Settling Flocculants WELLDONELOC red mud setting flocculants is used for settling aluminum red mud slurries in alumina plants, which provide high settling rates, better separation performance and reducing suspended solids significantly. WELLDONELOC products could improve the liquor filtration operations and make the processing more economical. Products Products

White Granular Anionic Polyacrylamide Flocculant APAM For Waste Water Specification of Anionic Polyacrylamide APAM For Drinking Water(Solid Granule) CAS No.:9003-05-8 MF:【(C3H5NO)n】 Anionic Polyacrylamide, White Granular is a water-soluble high polymer solid powder. It’s not soluble in most organic solvent, with good flocculating activity. Anionic Flocculants are also provide in a range of molecular weights, also have different degree of charge(ionicity) & degree of

Water- soluble High Polymer Anionic Polyacrylamide Powder Good Flocculating Activity Description: This product is a water- soluble high polymer.It's not soluble in most organic solvents, with good flocculating activity, and can reduce the friction resistance between liquid. Application Field: 1. It can be used to treat industrial wastewater and mining wastewater. 2. It can also be used as an additive of the mud materials in oil-field, geological drilling and well boring. Item

High Molecular Weight Medium Anionic Polyacrylamide Road Soil Stabilizer Product Description Anionic Polyacrylamide Powder Anionic Polyacrylamide is accessible in solid powder form and this water soluble polymer has various molecular weight and different charge density range. This item is utilized for raising viscosity level of water by enhancing its thickness level or to promote flocculation of particles found in water by raising settlement rate of fine suspended particles.

Anionic Polyacrylamide Emulsion Oil Drilling Chemicals CAS No. 9003-05-8 Description: Anionic polyacrylamide Emulsion grade (APAM) is a water based polymer. Anionic Polyacrylamide has a big range of high molecular weight from 16-25 million, with an anionic charge density ranging from 10-60%. The PAM grade has high molecular weight, and medium to high charge degree. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage

Anionic Flocculant Polyacrylamide For Merrill Crowe Process / Silver Mine Mining Tails Water Treatment Characteristics: Polyacrylamide (PAM) is water-soluble polymers, which is insoluble in most organic solvents, with good flocculation it can reduce the frictional resistance between the liquid. Our products by ion characteristics can be divided into anionic, nonionic, cationic types. Typical Specifications: Ionic Charge: Anionic Molecular Weight: 15-18million Hydrolysis

Anionic Polyacrylamide Flocculant For Soil Stabilization In Road Building Process Application: Materials used for drilling mud additives, can reduce the friction of the drill bit to extend the service life of drill bits to improve the penetration rate and the footage, reduce the time for drilling the plug, the collapse of effective anti-wells, in addition to thickening the water used in flooding, fracturing fluid and selective water shutoff, for Enhanced Oil Recovery

Phosphatation Process Flotation Flocculant Anionic Polyacrylamide Flocculant For Paper Making Water Treatment Description: This product is highly efficient polyacrylamide flocculant, which not only speeds up clarification, but alsostrengthens the floc against shearing forces mainly during the desweetening stage, it is working perfect in melt raw sugar flotation, low dosage and quick separation of the flocs. It has high performance of color removal of syrup, more than 50%.