Oil Field Chemicals

Powder Flocculant Cationic Polyacrylamide for Oil Refinery Waste Water Solid Removal Product Description Raitte cationic polyacrylamide flocculant is working well in oil refinery waste water treatment. Refineries normally use emulsion breakers/coagulants and flocculants to remove the oil from the API and DAF (DNF) units. Using the flocculant products in the DAF allows for a wider swing in oil concentration and improved oil/water separation as the Floc has a high affinity for

Oil Drilling Mud Additives Partially Hydrolyzed Polyacrylamide For Oil Field Chemicals Description: This PAM is Partially Hydrolyzed Polyacrylamide PHPA, with different molecular weight and with a moderate anionic charge for drilling mud additive. The molecular weight around 18-22 million, available in water and salt wells. It is a co-polymer of anionic character and high molecular weight. It is a water-soluble polymer, which is primarily used as a highly efficient fluid loss

Oil Gas Field Chemicals Cationic Polyacrylamide Water Treatment Agent It is a water-soluble and linear organic polymer with high molecular weight copolymerized by cation monomer and acrylamide. Application: As a flocculating agent, mainly used in industrial solid-liquid separation process, including settlement, clarification, concentrate and sludge dewatering processes etc. The main applications are urban sewage treatment, paper making, food processing, petrochemical,

Oil Field Fracturing Fluid Drag Reducer Emulsion Cationic Polyacrylamide Drag Reducer according to the form can be divided into emulsion, which can reduce friction, and more than 70% of the pumping pressure. Emulsion type of drag reduction agent. are completely hydrolyzed in water, which improve chaotic fluid way, thus reducing the pumping pressure, to achieve the objective of the given velocity. For water-based fluid, effectively drag reduction can enhance the guar gum

Clean Water Industrial Wastewater Treatment Solid content10±1％ PH 4.0~7.0 For Oil Field Chemicals Structural formula : Molecular formula: (C8H16NCl)n Specification Iteam QT-502 Appearance colorless or light yellow liquid Solid content％ 10±1 PH 1% aqueous solution 4.0~7.0 Viscosity(25℃) mpa.s 10000~30000 Notice (1) there is no fixed pattern application technology, customers should be based on its own technology and equipment conditions, the implementation of application. (2)

Fracture Friction Reducer Polyacrylamide Emulsion in Shale Gas Polyacrylamide For Oilfield Use 1. Classification:This product is divided into colloid and powder, and falls into the non- ion type and anion type according to the species (calling partly-solving water object) 2. Molecular formula: (CH2-CHCONH2)n(non- ion type) (CH2-CHCONH2) n(CH2-CHCOOHa) m (anion type) 3. Physical property Colloid product has no color, transparent, not poisonous, and has no corrosion. Powder is

Anionic Polyacrylamide Emulsion Oil Drilling Chemicals CAS No. 9003-05-8 Description: Anionic polyacrylamide Emulsion is a water based polymer. Anionic Polyacrylamide has a big range of high molecular weight from 16-25 million, with an anionic charge density ranging from 10-60%. This pam grade has high molecular weight, and medium to high charge degree. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage flocculation of

Anionic Polyacrylamide for Oil Drilling Mud Additives Polymer CAS 9003-05-8 Description: This Polyacrylamide is high molecular weight of anionic polyacrylamide powder, which is used as drilling mud additives in oil and gas drilling field. The molecular weight around 18-22 million, available in water and salt wells. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage flocculation of particles present in water. Due to the polar

Fresh Water Well and Salt Well Drilling Mud Additives Anionic Polymer Description: drilling fluids chemicals Raitte is a professional manufacturer in China for Polyacrylamide. Anionic polyacrylamide (APAM) is a water-soluble polymer formed from acrylamide (a compound with the molecular formula C3H5NO) subunits. It has a big range of high molecular weight from 20-25 million, with an anionic charge density ranging from 40-50%. Soluble in water, safe, non-toxic, hydrolytic

Anionic Polyacrylamide High For Vertical Drilling in Minery Industry Description: It is high molecular weight anionic polymer, It has high molecular weight 15-18 million, with an anionic charge density ranging 20%. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage flocculation of particles present in water. For oil drilling field, it mainly used together in Bentonite mud, as the additive, and mixed with Polyanionic

Water Soluble Anionic Polyacrylamide Emulsion for Friction Reducer in Oil Drilling Description: Anionic Polyacrylamide Emulsion is high molecular weight with different charge density, mainly used as flocculants in water treatment, mining, paper making, sludge dewatering, oily wastewater treatment, and drilling etc.. In oil drilling field, it is used as Friction Reducer, good viscosity, high efficiency. No-toxic, easy to be dissolved in water, can be used both in fresh water

Oil Gas Field Fracturing Fluid Drag Reducer Emulsion PAM MW 16-19million Water-Based Fluid Drag Reducer according to the form can be divided into emulsion, which can reduce friction, and more than 70% of the pumping pressure. Emulsion type of drag reduction agent. are completely hydrolyzed in water, which improve chaotic fluid way, thus reducing the pumping pressure, to achieve the objective of the given velocity. For water-based fluid, effectively drag reduction can enhance

100 mesh Anionic Polyacrylamide Fine Powder For Oil Field Chemicals The fine powder of polyacrylamide is made in the early stage of drying and blowing. It is screened and directly ground. The current process is much simpler. It is directly extracted from the finished material pick-up port or blown fine powder into the recycling equipment. A certain amount of excipients or finished materials are mixed, which is why some fine powders are cheaper than polyacrylamide fine powder.

Oil Field Drilling Chemicals Raw Materials Anionic Polyacrylamide By means of adding a certain amount of polyacrylamide into the injected water and increaseits viscosity to improve the oil- water mobility ratio. The oil layer catches and absorbs the polymer molecules which lowers the permeability of high and medium filter layer or swept layer, increase the seepage resistance of injected water, increase the water absorption of low filter layer and low swept layer, enlarge the

Oil Field Chemicals Plugging Agent Polyacrylamide For Oilfield Development In the oil production process, water logging problem often occurs due to the nonuniformity of the stratum which need to be fixed. The plugging essence is to change the water filtration state in the stratum to reduce the oil field water, keep stratum energy and enhance the recovery ratio. In the process of oil field production, the water in the reservoir "breakthrough” and ”channeling" phenomenon

Oil Field Fracturing Fluid Drag Reducer Emulsion Cationic Polyacrylamide Drag Reducer according to the form can be divided into emulsion, which can reduce friction, and more than 70% of the pumping pressure. Emulsion type of drag reduction agent. are completely hydrolyzed in water, which improve chaotic fluid way, thus reducing the pumping pressure, to achieve the objective of the given velocity. For water-based fluid, effectively drag reduction can enhance the guar gum

Polymer Oil-displacing Agent Polyacrylamide For Oil Field Chemicals Polymer flooding is achieved by adding a certain amount of high molecular weight polyacrylamide to the injected water to increase the viscosity of the injected water, improve the oil-water current ratio,adjυst the water injection profile, expand the swept volume. Since the viscoelasticity of the polymer molecule has a stretching and carrying effect. on the oil film oil droplets, the oil displacement

Oil Field Acid Thicker Agent Powder Polyacrylamide MW 6-36 Million Flocculant Acidizing is one of the main measures to increase oil and gas output, using the principle of acid has corrosion and dissolution to rock cement, formation pore and fracture. Acidification can restore or improve the permeability of the formation pαe and fracture. The addition of acid thickener can improve the viscosity of acid, reduces the activator acid diffusion velocity, increases acid operating

Oil Field Fracturing Fluid Drag Reducer Emulsion Cationic Polyacrylamide Drag Reducer according to the form can be divided into emulsion, which can reduce friction, and more than 70% of the pumping pressure. Emulsion type of drag reduction agent. are completely hydrolyzed in water, which improve chaotic fluid way, thus reducing the pumping pressure, to achieve the objective of the given velocity. For water-based fluid, effectively drag reduction can enhance the guar gum

Oil Field Fracturing Fluid Drag Reducer Emulsion Cationic Polyacrylamide Drag Reducer according to the form can be divided into emulsion, which can reduce friction, and more than 70% of the pumping pressure. Emulsion type of drag reduction agent. are completely hydrolyzed in water, which improve chaotic fluid way, thus reducing the pumping pressure, to achieve the objective of the given velocity. For water-based fluid, effectively drag reduction can enhance the guar gum