Wellhead Fittings

API 6A Well Surface Testing Oil Diverter Manifold API Spec 16A clamps differ from all other API equipment in regard to design and hydrotest. Clamps serve as fasteners similar to bolts, they do not come in contact with well fluid, and they may connect several API specified connectors having different nominal sizes and working pressures. Clamps provide a reliable means to join API and other hub connections. Any of the equipment in the following list may have clamp hub

API 6A Wellhead Cross Over High Pressure Hammer Union 3" FIG 602 x2" FIG1502 The hammer union is the wellhead fittings, as the part of wellhead equipment to be applied to the connection of blocking, Kill line, high pressure manifolds and vehicle-mount system in oil well cementing operation ,crushing operaton , acidifying and well testing operation. And underground well operation the weco hammer union is used to connect the various parts of the pipeline parts and so on. The

API 6A High Pressure Wellhead Nipple, Pipe fittings with Weco Union ​ The Nipple Pipe is the high pressure piping fitting, which is applied for cementing and fracturing equipment to deliver the High Pressure Fluid Control Products. The nipple pipe is also called pup joint with Weco Union connection and widely used in the acidic operating environment (excluding containing CO2, H2S sour gas operating environment) in the high-pressure discharge line, input line, a temporary flow

Wellhead Fittings Rigid High Pressure Integral Straight Pipes API 6A The pup joint is a kind of straight pipe or flowline pipe used in wellhead manifold to transport high pressure flow, there are two types of straight pipe are available including Integral Pup Joints and Welded Pup joint. The straight pipe is a high pressure pipe fitting with different ends such as hammer union, thread, or flange connection. The straight pipe is made of alloy steel according to API 6A. With

Elbow 90 Degree with WECO Union Wellhead Integral Fittings Well Testing The Elbow is a kind of wellhead integral pipe fittings, which is desgined with flanged and union connection. The Elbows including 90 degree elbow , 45 degree elbow and 60 degree are connected with wellhead equipment for various well service such as well testing service and well production service etc. The elbow is applied as the connectors for various pipings, manifold or wellhead connection. The Elbow

API 6A Integral Tee 3” fig.1502 15000 psi Wellhead Fittings Thread x Thread x Wing The Integral Tee is one of wellhead integral fittings which is manufactured according to API 6A specification, The integral tee includes wye and Y tee (Y shape tee),90 degree elblow, 180 degree elbow ,tee,cross,Laterals and Fishtails,with sizes of integral tee is ranging from 2" to 7" and pressures from 3000psi to 20000psi.The integral tee is made of high strength alloy steel forging with all

Wellhead Chiksan Swivel Joint 3" Fig 602 API 6A Piping Fitting The wellhead swivel joints composed with integral ball bearing is designed and manufactured with API 6A and API 16C standard and on the basis of technologies from FMC, SPM and ANSON series. Swivel Joints which are Widely used in drilling, fracturing, cementing and production.it is suitable for normal or low temperature and H2S environments. The size specification of long sweep swivel joints / long radius swivel

Wellhead Chiksan Swivel Joint 3" Fig 602 API 6A Piping Fitting The Chiksan Swivel Joints are metal pipe fittings with integral ball-bearing swivels composed with integral ball bearing according to API 6A and API 16C standard. The design of the chiksan swivel joint is on the basis of technologies from FMC, SPM and ANSON series.The Chiksan Swivel Joints are widely used in drilling, fracturing, cementing and production operation and applied in manifolds and chicksan hose which

API WECO Hammer Union 2" Fig.1502 Wellhead Integral Fittings The hammer union is the wellhead fittings, as the part of wellhead equipment to be applied to the connection of blocking, Kill line, high pressure manifolds and vehicle-mount system in oil well cementing operation ,crushing operaton , acidifying and well testing operation. And underground well operation the weco hammer union is used to connect the various parts of the pipeline parts and so on. The size of hammer

API 16C Integral Pup Joint With Hammer Union High Pressure WECO Piping The Integral Pup joints are the part of cementing and fracturing equipment, which is used to tranport high pressure flow in fracturing manifold, cementing manifold,maintenance manifold and test manifold in the acidic operating environment. The Integral Pup Joints are straight tubes / straight pipes with hammer union, thread or flange connections on both ends, The Integral Pup joints are made of high

Wellhead Fittings API 16C Integral Straight Tubes Alloy Steel Forging ​ The high pressure straight tubes with the weco union connection is wellhead Chiksan integral Pup Joints, it is used to transporting high pressure flow in wellhead manifold such as cementing manifold, fracturing manifold, maintenance manifold and oil well testing manifold. The Integral straight tubes are made of alloy steel forging, which make it feature with reliable and long service life. Features of

Wellhead Fittings API 16C Integral Pup Joints With Hammer Union ​ The high pressure Chiksan integral Pup Joints are the straight tubes or straight pipes with hammer union, thread, or flange connections on both ends, it is used to transporting high pressure flow in fracturing manifold, cementing manifold, maintenance manifold and test manifold. The Integral Pup Joints are made of alloy steel forging. We can provide 1"~4" and 1000psi to 15000psi(7MPa to 105MPa) straight pipes.

API 6A Wellhead Integral Pipe Fittings Swivel Joint / Tee / Wellhead Crossover ​ Wellhead Integral Fittings are manufactured according to API 6A standard, and used for connecting surface manifold. The wellhead integral Fittings are forged from high strength alloy steel, handled by advanced heat treatment technology and conducted strict factory quality control. Two type of end connections are available including union or thread. Many types are available including tees,

API 6A Well Surface Testing Oil Diverter Manifold API Spec 16A clamps differ from all other API equipment in regard to design and hydrotest. Clamps serve as fasteners similar to bolts, they do not come in contact with well fluid, and they may connect several API specified connectors having different nominal sizes and working pressures. Clamps provide a reliable means to join API and other hub connections. Any of the equipment in the following list may have clamp hub

API 6A Well Surface Testing Oil Diverter Manifold API Spec 16A clamps differ from all other API equipment in regard to design and hydrotest. Clamps serve as fasteners similar to bolts, they do not come in contact with well fluid, and they may connect several API specified connectors having different nominal sizes and working pressures. Clamps provide a reliable means to join API and other hub connections. Any of the equipment in the following list may have clamp hub

Forged Studded Crosses API 6A Wellhead Integral Fittings Solid Block ​ Wellhead Studded Crosses are important components for Wellhead Christmas Tree, when an angled connection in wellhead Christmas Tree is required, the studded cross will be assembled on it. The studded crosses are made from solid metal block. Boundary Dimensions - Bore and centerline-to-face dimension shall conform to API 6A standards. Common configurations of studded crosses include 4 way, 5 way, and 6 way

API 6A Wellhead High Pressure Integral Fittings The High pressure integral Fittings and welded fittings include XY Wye, Elbow, Tee, Cross, Lateral and Fishtails with size ranging from 2” to 4” and pressure from 3000psi to 20000psi. The Integral connections are made by high strength forged alloy steel which are all heat treated to enhance load-bearing capacity and lengthen service life. They may have union ends for quick and easy connection with various cementing or fracturing

API 6A Wellhead Integral Pipe Fittings High Pressure Chiksan swivel joints​ Swivel joint is a kind of high pressure fluid control equipment used in oil well cementing and fracturing service.. Hammer union of the swivel joint is to change direction and to facilitate the construction of the pipeline connecting the pipe line connection. The chiksan swivel joint is connected to high-pressure discharge line, input line, a temporary flow line, well testing, and other high-voltage

API 6A Wellhead Chicksan Straight Pipe 3 " Fig1502 Union Pipeline The union straight pipe is manufactured according to API 6A specification with hammer union end connection, it is used for various manifold connection in wellhead equipment. The High pressure straight pipes have four different types: pressure seal pipes, non-pressure seal pipes, integral straight pipes and welding pipe. We can provide integral straight pipes in 1”-4” and 1000psi to 15000psi straight pipes with

API 6A 3" Fig 1502 Weco Hammer Union Wellhead Fittings for Connection Hammer Unions are manufactured from steel forings according to API 6A specificatio and working condition in sizes from 1/2" to 12", with pressure ratings up to 20,000 PSI working pressure. The hammer unions can be used in sour gas service in accordance with NACE MR-0175.The hammer union is applied to the connection of blocking, Kill line, high pressure manifolds and vehicle-mount system in oil well