Flammability Testing Equipment

Point Temperature Tester First, the scope of use According to the national standard GB4610-84 "Plastics burning performance test method - measuring the temperature" to compare the combustion characteristics of various materials under specific conditions Second, the main technical parameters 1. Single-chip control, easy to use and maintain 2. Copper ingot furnace has a diameter of 100mm and a height of 100mm. There are 4 container holes. 3. The stainless steel container has an

Glow Wire Tester Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, household appliances and their materials for ignition hazard test, simulating hot elements or Thermal stress caused by a heat source or an ignition source such as an overload resistor in a short time. The instrument adopts steel structure for spraying, imported

Fireproof Coating Tester First, the scope of use Suitable for testing the flame resistance of decorative fire retardant coatings applied to the surface of flammable substrates. Second, product features 1. High degree of automation, temperature error is lower than national standards 2. Reasonable structure design, convenient operation and maintenance 3. Touch screen control, easy to test Third, the main technical parameters 1.PLC + NA view professional software, touch screen

Horizontal Vertical Burner CZF-3 horizontal and vertical burning tester is developed according to the national standard GB2408-1996 "Test method for plastic burning performance - horizontal method and vertical method", which fully meets the technical requirements of national standard GB/T2408. The test can be carried out in two ways of plastic horizontal burning and vertical burning in the same instrument, and the test time can be automatically recorded and saved. Compared

Building Material Smoke Density Tester First, the scope of application: The JCY-2 building material smoke density tester is developed according to the technical conditions stipulated in the national standard GB/T8627-2007 "Test method for smoke density of burning or decomposition of building materials", and is applicable to the static burning of building materials and their products and other materials. Determination of smoke production Second, product features 1. This

Building Materials Non-combustible Test Furnace First, the scope of use The test furnace is developed according to the technical specifications and requirements specified in the national standard GB/T5464-2010, and is applicable to the test method for assessing the combustion performance of building materials under laboratory conditions. Suitable for testing the burning performance classification of Class A fireproof materials in the burning performance classification of

Alcohol Blowtorch Burning Test Device JC-A type alcohol burner lamp burning tester is designed according to GB16413-2009 safety performance test specification for glass fiber reinforced plastic products used in underground coal mines. The flame retardant performance is judged: the arithmetic mean value of the flame life of the standard sample should be no more than 5 seconds. The maximum single value of the flame-burning after-burning time should be no more than 15 seconds.

Oxygen Index Tester First, the scope of application: Suitable for the determination of the burning properties of plastics, rubber, fiber, foam, film and film and textile materials Second, the main technical parameters: Flow meter display 2. Machine accuracy: 2.5 3. Flow adjustment range: 0-10L/min (60-600 L/h) 4. Oxygen input pressure: >0.25Mpa 5. Measurement range: 0 ~ 100% O2; 6. Combustion tube: inner diameter ≥75mm total 450mm 7. Gas flow rate in the combustion cylinder:

Steel Structure Fireproof Coating Sample Test Furnace First, the scope of use Suitable for testing the flame resistance of decorative fire retardant coatings applied to the surface of flammable substrates. Second, product features 1. PLC + NA view professional software, touch screen control, easy to operate 2. The whole process of the test is fully automated 3. Temperature error is lower than national standard Third, the main technical parameters 1. Working voltage: AC 380V ±

Great Quality Building Material Smoke Density Tester First, the scope of application: The building material smoke density tester is developed according to the technical conditions stipulated in the national standard GB/T8627-2007 "Test method for smoke density of burning or decomposition of building materials", and is applicable to the static burning of building materials and their products and other materials. Determination of smoke production. Second, product features 1.

Building Material Smoke Density Tester First, the scope of application: The building material smoke density tester is developed according to the technical conditions stipulated in the national standard GB/T8627-2007 "Test method for smoke density of burning or decomposition of building materials", and is applicable to the static burning of building materials and their products and other materials. Determination of smoke production. Second, product features 1. This equipment

Multifunctional Bond Strength Detector First, the scope of use Bonding strength testing of facing bricks, tiles, insulation boards, paints, paints, rivets, anchors, mortars, etc. Second, product features Firstly, according to the characteristics of low bonding strength and small adhesion of the facing brick, the maximum tensile force of the HD series multi-functional bond strength detector is designed to be 10KN to ensure the detection accuracy of the instrument. In the

Oxygen Index Tester First, the scope of application: Suitable for the determination of the burning properties of plastics, rubber, fiber, foam, film and film and textile materials Second, the main technical parameters: 1. Flow meter display 2. Machine accuracy: 2.5 3. Flow adjustment range: 0-10L/min (60-600 L/h) 4. Oxygen input pressure: >0.25Mpa 5. Measurement range: 0 ~ 100% O2; 6. Burning cylinder: inner diameter ≥75mm total 450mm 7. Gas flow rate in the combustion

Textile Vertical Burner First, the scope of use Suitable for all types of fabrics and their products. Test method applicable to the burning performance of the bottom edge of the vertical textile specified in GB5455-2014 standard. Second, to technical parameters 1. The equipment is divided into two parts: the control part and the combustion box. The size of the combustion box is 330*330*765mm. 2. The front part of the combustion box is a tempered glass observation door 3. The

Initial Dry Cracking Resistance Test Device The initial dry crack resistance test machine is a test equipment developed according to the technical conditions specified in the national standard GB9779-2005 "Multilayer Architectural Coatings". Main technical indicators and working conditions: a, wind speed control is: 3 ± 0.3M / S b, working voltage: 200 ~ 240V 50HZ c, laboratory temperature: 23 ± 2 ° C, relative humidity is 50% ± 5% Equipment size: 1.2m*0.3m*0.3m Scope of

Excellent Quality Building Material Combustion Calorific Value Tester Introduction to building material combustion calorific value tester: BXT-JL building material combustion calorific value tester, also known as building material product combustion calorific value tester, building material combustion calorific value calorimeter, is to place a specific quality building material pattern in the test environment under standard conditions to test the type of combustion heat value

Building Material Combustion Calorific Value Tester Introduction to building material combustion calorific value tester: BXT-JL building material combustion calorific value tester, also known as building material product combustion calorific value tester, building material combustion calorific value calorimeter, is to place a specific quality building material pattern in the test environment under standard conditions to test the type of combustion heat value. Under standard

Horizontal Vertical Burning Tester The horizontal vertical burning tester is developed according to the standards ANSI/UL94, IEC60950-1, IEC695-2-2, GB/T2408-2008, and fully meets the technical requirements of the national standard GB/T2408. The two instruments of plastic horizontal burning and vertical burning can be tested on the same instrument. The equipment stipulates that the pattern placed in the horizontal and vertical directions in the laboratory is ignited with a

Fireproof Coating Tester Combustion Testing Equipment First, the scope of use The instrument is suitable for quantitatively testing the flame retardant properties of fireproof coatings applied on the surface of substrates under laboratory conditions, and evaluating the advantages and disadvantages of fireproof coatings by the weight loss of combustion and the volume of carbonization. Second, the main technical parameters 1. The dimensions of the instrument are about 340mm ×

Durable Excellent Digital Oxygen Index Analyzer Product Name: Digital Oxygen Index Tester TIPS: Digital Oxygen Index Tester with temperature controller to control temperature, the other parameters are consistent with JF-3 type digital oximetry index analyzer. First, the scope of application: Suitable for the determination of the burning properties of plastics, rubber, fiber, foam, film and film and textile materials Second, the main technical parameters: 1. Using imported